TX-H2X-HDBT

H2XC Card: 4K HDBaseT In, 4K HDBaseT Out, Mirrored HDMI Out

De-centralize sources connected to the H2X matrix platform with this HDBaseT input & output card. Accepting 4K UHD transmissions from 70m/230ft, this modular card allows source devices to be kept in-suit while making them part of the main distribution system.

AUDIO & VIDEO

Inputs

1x HDMI In19-pin type A
1x S/PDIF In Coaxial Digital
1x HDBaseT™ 8-pin RJ-45 female

Outputs

1x HDBaseT™ 8-pin RJ-45 female
1x S/PDIF Out Coaxial Digital
1x Audio Out 3pin Phoenix Connector

Video Encoding

HDBaseT™ Class A

Encoding Data Rate

9.2Gbps

Audio Formats

2ch PCM | Multichannel: LPCM and Up to DTS-X and Dolby Atmos

Video Resolution (Max)

1920x1080p @60Hz 16bit
3840x2160p @30Hz 8bit 4:4:4
3840x2160p @60Hz 10bit 4:2:0 HDR
4096x2150p @60Hz 8bit 4:4:4

Maximum Pixel Clock

HDMI: 600mHz | HDBaseT™: 297MHz

COMMUNICATION & CONTROL

HDMI

HDCP 2.2 | DVI-D supported with adapter (not included)

HDBaseT

HDMI | HDCP 2.2 | 1-way PoH to Receiver | IR RX to Receiver

IR

1x IR RX 3.5mm (1/8in) TRS Stereo | To Receiver over HDBaseT™

RS-232

Matrix Control | Bidirectional over HDBaseT™ | Firmware Updates

Ethernet

From Matrix – No Connection on card | Bidirectional over HDBaseT™

Audio Return Channel
(ARC)

Supported

POWER

Power Supply

Internal to Matrix

Max Power Consumption

Matrix Dependent

  • HDBaseT Input – enables the direct connection of a remote source to the matrix via an HDBaseT Transmitter only at the source location, rather than an HDBaseT extender set previously required to distribute a remote signal over distance to a matrix. The matrix will then route the remote source signal as it does with any locally connected source
  • HDBaseT Output – transmitting Class A HDBaseT which includes video, audio, control and power up to 70m/230ft of 4K and 100m/328ft of 1080p
  • HDMI Output – mirrored to HDBaseT to allow additional connection of a local display device, AVR or to extend with a hybrid active optical HDMI cable (HAOC)
  • Stereo Audio Output – offering stereo audio breakout of a zone with a 3-pin phoenix connector for analog audio
  • S/PDIF output supporting 5.1 audio content de-embedded from sources or ARC from connected zones
  • S/PDIF Audio Input – another way to inject digital audio to take advantage of the H2X platform’s powerful audio matrix and DSP.
  • IR RX – allows control signals to be sent to the sink device

Share

Cables

We use cookies to improve your experience on our site. By continuing to browse our site, you agree to the use of cookies. For more information, please see our privacy policy.