Description
An established leader in AV matrix solutions, WyreStorm packs a wealth of experience into this powerful yet compact 1U chassis. Offering transmission of HDMI content up to 4K UHD & HDR content to 35m/115ft, pairing HDBaseT with WyreStorm’s powerful crosspoint HDMI switching chipset. The MX-0404-KIT has 3 HDBaseT zone outputs with PoH and a single switched HDMI output which can be paired with WyreStorm’s HAOC hybrid optical HDMI cables or any extender for transmission via HDBaseT or OM3 fiber. The MX-0404-KIT doesn’t stop there, offering zone audio breakout via S/PDIF, CEC triggering for all connected screens and the A/V mute function enhances the offering for the modern home or commercial installation.
AUDIO & VIDEO
Inputs
4x HDMI In: 19-pin type A
Outputs
4x S/PDIF Out: RCA Female
3x HDBT Out: 8-pin RJ-45 Female
1x HDMI Out: 19-pin type A
Video Encoding
HDBaseT™ Class B
Encoding Data Rate
9.2Gbps
End to End Latency
10μs (micro seconds)
Audio Formats
HDMI/HDBaseT: 2ch LPCM | Multichannel up to Dolby Atmos and DTS-X
S/PDIF: 2ch LPCM | Dolby Digital/DTS up to 5.1ch
Analog: 2ch Analog
Video Resolution (Max)
1920x1080p @60Hz 16bit
3840x2160p @60Hz 8bit 4:2:0
Supported Standards
DCI (4096×2160) | RGB | HDR | HDR10 | Dolby Vision up to 30Hz | HLG | BT.2020 | BT.2100
Maximum Pixel Clock
HDBaseT: 340MHz
COMMUNICATION & CONTROL
HDMI
HDMI 2.0 | HDCP 2.2 | EDID | CEC | DVI/D supported with adapter (not included)
HDBaseT
HDMI 2.0 | HDCP 2.2 | EDID | CEC | 1-way PoH | Bidirectional IR
CEC
CEC power triggering for connected screens – Requires CEC compatibility
IR
3x IR RX: 3.5mm (1/8in) TRS Stereo
4x IR TX: 3.5mm (1/8in) TS Mono
Bidirectional over HDBaseT
RS-232
1x RS-232: 9-pin DB9 Female
Ethernet
1x LAN: 8-pin RJ-45 Female
POWER
Power Supply
100~240V AC 50/60Hz
Max Power Consumption
48.2W
ADDITIONAL FEATURES
- HDBaseT enables 60Hz 4K UHD content (8-bit) to be sent over HDBaseT to 35m/115ft
- Compatible with DVI-I and DP++ v1.3 signals from compatible devices
- 4 audio outputs allow audio to be independently de-embedded from outputs via S/PDIF coaxial
- SmartEDID feature also dynamically detects display/source capabilities and automatically outputs the highest possible resolution
- Additional EDID management through DIP switches for global setting or via WebUI for independent management of EDID per source
- Embedded WyreStorm WebUI enables simple source switching and installer set-up & configuration
- WebUI includes full EDID management to read, copy, store or import EDID from connected devices
- Assign a different EDID to each connected source device
- API triggered standby mode puts unit into low power state during downtime
- Flexible control options – front panel buttons, infrared remote control, local IR, RS-232, Telnet or WebUI
- 3.5mm jack input for receiving local IR commands out of line-of-sight
- 2-way IR for far-end device control from control system or source control from a zone
Reviews
There are no reviews yet.