NetworkHD™ 600 Series 4K60 4:4:4 10Gb SDVoE Fiber Transceiver
The NHD-600-TRXF is a SDVoE fiber transceiver capable of lossless & latency-free 4K60 over a 10Gb network. The TRXF allows you to transmit and receive A/V simultaneous through a single device or be programmed to act as a dedicated TX or RX. The SFP+ connector supports up to 300m (984ft), 10Gbps transmission distance for extremely long reach commercial applications. 3 x High-Speed USB 2.0 ports allow extension for keyboard & mouse applications and even compatibility with webcams, touchscreens, and media storage.
AUDIO & VIDEO
Inputs/Outputs
1x HDMI 2.0b Input
1x HDMI 2.0b Output
1x 5-pin Balanced Analog Audio
1x 10Gb/s SFP+:
– 10GBASE-SR: 300m using OM3 multi-mode
– 10GBASE-LR: 10km using OM3 single-mode
Video Encoding/Decoding
SDVoE Pixel Pipeline
Encoding/Decoding Data Rate
1080p@60Hz 8bit – 3.4Gbps
4K UHD@30Hz 4:4:4 8bit – 6.4Gbps
4K UHD@60Hz 4:4:4 8bit – 8.7Gbps (with light compression)
End to End Latency
Genlock Mode: Uncompressed = 30us, Compressed <120us
Fast Switch Mode: 1~2 video frames = min. between 16.7 – 33.4ms @ 60fps
Video Resolution (Max)
4096x2160p @ 60Hz 8bit 4:4:4 or RGB
3840x2160p @ 60Hz 12bit 4:2:2 Dolby Vision
3840x 2160p @ 60Hz 10bit 4:2:2 HDR10/HLG
1920x1080p @60Hz 12bit
Supported Standards
RGB | DCI | Rec. 709 | BT.2020
COMMUNICATION & CONTROL
HDMI
HDCP 2.2 | CEC
Ethernet
1x 1GbE LAN 8-pin RJ45
RS-232
1x 3-pin Phoenix Connector | 2 Way | Broadcast | Routed | API Programmable
IR
1x IR TX 3.5mm TS Mono Jack | API Programmable
1x IR RX 3.5mm TRS Stereo Jack | API Programmable
USB
3x USB 2.0 Type A
1x USB 2.0 Type B Host
USB Bandwidth: 480Mbps
POWER
Power Supply
12V 2A DC PSU
Max Power Consumption
Max: 24w | Average: 10w
ADDITIONAL FEATURES
We use cookies to improve your experience on our site. By continuing to browse our site, you agree to the use of cookies. For more information, please see our privacy policy.