NHD-500-DNT-TX

NetworkHD™ 500 Series 4K60 4:4:4 JPEG2000 Encoder with Dante Audio

The NHD-500-DNT-TX is part of the powerful NetworkHD 500 series family of products. Capable of encoding up to 4K60 including Dolby Vision, HDR10 and HLG content. The 500 series comes loaded with a number of advanced features such as the flexibility of Ethernet or Fiber as a transport method. Ultra-low latency encoding and incredibly fast matrix switching speeds enhance the experience. Unique to this encoder is an integrated 2 channel Dante & AES67 audio output.

Audio and Video

Inputs/Outputs

1x HDMI In
1x 3.5mm TRS Analog In
1x 5-pin Balanced Analog Out
1x Toslink Digital Out

Maximum Pixel Clock

600Mhz

Max Video Resolutions

4096x2160p @ 60Hz 8bit 4:4:4 or RGB
3840x2160p @ 60Hz 12bit 4:2:2 Dolby Vision
3840x 2160p @ 60Hz 10bit 4:2:2 HDR10/HLG
1920x1080p @60Hz 12bit

Supported Standards

RGB | BT.2020 | BT.709 | DCI | HDR10 | HDR10+ | HLG | Dolby Vision

Audio Formats

Passthrough: 2CH PCM up to DTS:X & Dolby Atmos
ARC: 2CH PCM up to Dolby Digital Plus & DTS 5.1
Dante/AES67: 2CH PCM

Output Video Encoding

JPEG 2000

Encoding Data Rate

Max: 850Mbps (configurable)

End to End Latency

1 video frame latency (pass-through mode) 16ms @ 4K60 | 2 video frames latency (scaler/VW mode)

COMMUNICATION AND CONTROL

HDMI

HDMI 2.0b | HDCP 2.2 | CEC | ARC | EDID

Network

2x 1GbE RJ45 (Dante & main AV out)
1 x 1Gbps SFP
(1000Base-SX: 550m using OM3 MMF)
(1000Base-LX: 5km using SMF)
(1000Base-LX10: 10km using SMF)

RS-232

1x 3-Pin Phoenix Connector | 2-way | API Programmable

IR

1x IR TX 3.5mm TS Mono Jack | API Programmable
1x IR RX 3.5mm TRS Stereo Jack | API Programmable

USB

1x USB 2.0 Type Host
(Up to 300Mbps upstream)

Security Protocols

AES 128 | SSH | TLS | HTTPS

POWER

Power Supply

12V DC 1A | 802.3af PoE Compliant

Power Consumption

Max 15.4 | Average: 8w

Additional Features

  • Supports multi-channel audio passthrough including DTS:X & Dolby Atmos
  • Hugely scalable I/O, utilizing multicast technology
  • CEC One-Touch Play & Standby, bidirectional IR or RS-232 control of connected devices
  • Custom “No Source” idle image upload for branded down time
  • Analog audio de-embed output with volume control
  • Batch firmware update and batch settings functions offers a massive reduction on installation times
  • Custom EDID management with import/export

Share

Cables

We use cookies to improve your experience on our site. By continuing to browse our site, you agree to the use of cookies. For more information, please see our privacy policy.