NHD-400-E-RX

NetworkHD™ 400 Series 4K AV over IP JPEG 2000 Decoder

WyreStorm brings stunning 4K HDR video, video resolution scaling, multi-channel audio and audio matrixing to IP with the NetworkHD 400 Series’ NHD-400-E-RX AVoIP decoder. The reduced cost Type E version removes some control ports but retains the 400 Series core features. Used in conjunction with any 400 Series encoder, the NHD-400-E-RX seamlessly handles mixed resolution sources, content and display devices for matrix and video wall functionality up to 16×16 with image rotation and bezel compensation.

Featuring incredibly low latency, the 400 Series is the ideal AV over IP solution for systems where high quality and low latency are key requirements, making it perfect for both residential and commercial applications.

AUDIO AND VIDEO

Inputs

1x 8-pin RJ-45

Outputs

1x HDMI Out 19-pin type A

Audio Formats

2ch LPCM | Multichannel: LPCM and Up to DTS-X and Dolby Atmos

Output Video Encoding

JPEG 2000

Encoding Data Rate

Max: 850Mbps

End to End Latency (Max)

1 video frame latency (pass-through mode) 16ms @60fps 2 video frames latency (scaler/VW mode) 33ms @60fps

Video Resolutions (Max)

3840x2160p @60Hz 8bit 4:2:0

Supported Standards

HDR10 | HLG | BT.2020

Maximum Pixel Clock

300MHz

COMMUNICATION AND CONTROL

HDMI

HDCP 2.2 | CEC

Ethernet

1x LAN (PoE): 8-pin RJ-45 ANSI/TIA-568 8P8C, 1000Base-T, PoE PD (IEEE 802.3af)

RS-232

1x RS-232: 4-pin Phoenix | 2 Way (RX only) | Routed | API Programmable

POWER

Power Supply

12V DC 1A

PoE

IEEE 802.3af (15.4W at PSE)

Max Power Consumption

8W (with PSU)

Additional Features

  • Uses security protocols such as SSH, HTTPS and AES to encrypt data and prevent unauthorized access
  • Stunning visually lossless 4K UHD HDMI video with HDR over 1GbE / IP networks
  • Ultra-low end-to-end latency – only a single video frame (16ms at 60fps)
  • Multi-channel audio including DTS:X & Dolby ATMOS supported over HDMI
  • Image scaling – use a mix of 4K & 1080p displays throughout an installation
  • Easy network set-up using standard Layer 2 or Layer 3 managed switches
  • Hugely scalable I/O, utilizing multicast technology
  • Live video unicast preview streams for use with NetworkHD Touch or a custom control UI
  • Powerful audio matrix functionality – route audio separately from video to any decoder
  • CEC control or RS-232 control of connected devices
  • Up to 16×16 video walls with image scaling, bezel compensation and rotation
  • Custom “No Source” idle image upload for branded down time
  • Support all SD, HD and UHD video formats – including interlaced content
  • Batch firmware update and batch settings functions offers a massive reduction on installation times
  • Custom EDID management with import/export
  • HDCP 2.2 Compliant
  • IEEE 802.3af PoE compliant PD
  • Compatible with NHD-000-RACK4 rack mounting kit (brackets included with decoder)

Share

Cables

We use cookies to improve your experience on our site. By continuing to browse our site, you agree to the use of cookies. For more information, please see our privacy policy.