LUT-POWPAK
The HomeWorks® PowPak range of load controllers from Lutron allow easy installation and integration for a variety of applications, simple switched controlled, 3rd party integration and analogue dimming. Complete with Lutron’s Clear connect RF technology.
LMK-16R-DV-B – 16A Relay Module
The RF relay module with Softswitch is a radio frequency (RF) device that uses Lutron patented Softswitch technology to control up to 16A of general purpose loads based on input from RA2 Select, RadioRA 2 and HomeWorks® systems.
LMK-5T-DV-B – 0 to 10V Dimming Module
The RF dimming module with 0 to 10VDC control is a radio frequency (RF) control that operates 0 to 10VDC controlled fluorescent ballasts or LED drivers based on input from RA2 Select, RadioRA 2 and HomeWorks® systems.
LMK-CCO1-24-B – Contact Closure Output Module
The RF CCO Module is a low voltage radio frequency (RF) control that provides a single dry contact closure output based on input from RadioRAR 2 and HomeWorks® QS systems. It can be powered by 24VAC of 24VDC for easy connection and integration into building management, HVAC, VAV and other 3rd party systems.
0 to 10V Dimming Module
Contact Closure Output Module
SPECIFICATIONS
| LMK-16R-DV-B 16A Relay Module |
LMK-5T-DV-B 0 to 10V Dimming Module |
LMK-CCO1-24-B Contact Closure Output Module |
|
| Compatible With | RA2 Select, RadioRA 2 and HomeWorks systems | RA2 Select, RadioRA 2 and HomeWorks systems | RA2 Select, RadioRA 2 and HomeWorks systems |
| Power | 120 / 277V~ 50 to 60Hz 16A 0.5 HP at 120V~ 1.5 HP at 277V~ (LMJ model) 220 to 240V~ 50 to 60Hz 16A motor: 6A (LMK , LMM , LMN, LMQ models) |
120 / 277V~ 50 to 60Hz 5 A (LMJ model) 220 to 240V~ 50 to 60Hz 5A (LMK, LMM, LMN, LMQ models |
IEC PELV/NECR Class 2Operating voltage: 24V~ / 24V- Operating current, nominal: 45mA (24V~), 35mA (24V-) |
| Typical Power Consumption | < 1.0W Typical power test conditions: all loads off, top LED on | < 1.0W Typical power test conditions: all loads off | < 1.0W Typical power test conditions: all loads off, CCO LED on |
| Contact Closure Output | – | – | Accepts input voltages of 0 to 24V~ / 0 to 24V- Resistive load: 1.0A (0 to 24V-), 0.5A (0 to 24V~) Provides both normally open (NO) and normally closed (NC) dry contacts. Maintained or momentary output type. Output is latching. Minimum close time: 500ms |
| Load | Maximum load: 16 A general purpose. No minimum load requirements. Load types include, but are not limited to: Incandescent, MLV, ELV, resistive, inductive, magnetic fluorescent and electronic fluorescent |
0 to10V- Control Link Maximum Load: 60 mA, source or sink automatically configures. Control link compatible with ANSI E1.3 2001 (R2006), IEC 60929 Annex E Switched Maximum Load: 5 A lighting. No minimum load requirements. Load types include, but are not limited to: MLV, ELV, incandescent, magnetic fluorescent, electronic fluorescent and LEDs |
– |
| Surge Protection | Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended practice on surge voltages in low voltage AC power circuits | Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 | – |
| Communications | Operates using Clear Connect RF technology for reliable wireless communication RF range is 9m / 30ft from repeaters |
Operates using Clear Connect RF technology for reliable wireless communication RF range is 9m / 30ft from repeaters Recommended practice on surge voltages in low voltage AC power circuits |
Operates using Clear Connect RF Technology for reliable wireless communication RF range is 9m / 30ftfrom repeaters |
| Low Voltage CCO Wiring | – | – | CCO terminals accept 20 to 16 AWG (0.5 to 1.5mm2) solid or stranded wire |
| Environment | Ambient operating temperature: 0°C / 32°F to 55°C /131°F Ambient operating humidity: 0% to 90% humidity, non condensing Indoor use only |
Ambient operating temperature: 0°C / 32°F to 40°C / 104°F Ambient operating humidity: 0% to 90% humidity, non condensing Indoor use only |
Ambient operating temperature: 0°C / 32°F to 55°C /131°F Ambient operating humidity: 0% to 90% humidity, non condensing Indoor use only |
| Mounting | Mounts to an electrical junction box through a 21 mm / 0.5” trade size knockout opening | Mounts to an electrical junction box through a 21mm / 0.5” trade size knockout opening | Screw tabs provided for surface mounting (recommended) or mounts to an electrical junction box through a 21mm / 0.5” trade size knockout opening |
| Dimensions | Height: 87mm / 3.42” Height incl knockout: 100mm / 3.94” Knockout Opening: 21mm / 0.5” (trade size) Width: 72mm / 2.82” Depth: 32mm / 1.25” |
Height: 87mm / 3.42” Height incl knockout:100mm / 3.94” Knockout Opening: 21mm / 0.5” Width: 72mm / 2.82” Depth: 32mm/ 1.25” |
Height: 87mm / 3.42” Height incl knockout: 100mm / 3.94” Knockout Opening: 21mm / 0.5” Width: 72mm / 2.82” Depth: 32mm / 1.25” |
| Regulatory Approvals | UL®, UL 2043 Plenum rated, FCC approved. Complies with the limits for a Class B device, pursuant to Part 15 of the FCC rules: CSA, IC, NOM, ANATEL (LMJ model) CE, TRA, CITC (LMK model) WPC (LMN model) |
cULusR, UL 2043 Plenum rated, FCC approved. Complies with the limits for a Class B device, pursuant to Part 15 of the FCC rules: IC, NOM, ANATEL (LMJ model) CE, TRA, CITC (LMK model) WPC (LMN model) |
ULR, UL 2043 Plenum rated, FCC approved. Complies with the limits for a Class B device, pursuant to Part 15 of FCC rules, IC, (LMJ model only), CE, TRA, CITC (LMK model
|
