The power amplifiers are cutting edge multi-channel devices combining FPGA-based signal processing with advanced Class D power stages and universal power supply for global use.

The use of a Power Factor Correction (PFC) results in a sinusoidal current consumption from the mains. The reduced mains harmonics no longer burden the power grid. Another effect is a much-improved power delivery from unstable mains.

These amplifiers diagnose themselves and provide information about channel and device status. The output current of all channels is measured and feed to a 20kHz detector. By using a pilot tone via the internal generator, the connection and voice coil of the speakers can be monitored.

Inputs are DANTE AES67, and outputs are Phoenix connections.

The post gan Series appeared first on Wave Electronics Systems.

The post DSP Series appeared first on Wave Electronics Systems.

The post AIA Series appeared first on Wave Electronics Systems.

It is a well-known fact that LED Walls represent a significant challenge regarding placement of speakers that can deliver a commensurate level, most notably the critical center channel.

In reviewing what was offered by various companies, everything from reflecting some of the frequencies off the Wall, or use of combination line source and point source, or small speakers incapable of adequate performance and SPL, each of these approaches suffered from engineering problems – they were primarily marketing efforts.

The DIRECTOR represents a revolutionary and patent-pending approach to LED Wall loudspeaker design.

The post Director Pro-Active Ext Flush appeared first on Wave Electronics Systems.

The post Black Swan Be Pro-Active Ext Reference Cinema appeared first on Wave Electronics Systems.

Beryllium (Be)
Although it is one of the most expensive materials used to make speaker diaphragms, in terms of stiffness-to-weight ratio, Beryllium is the highest of any known metal and can deliver dramatically superior results when properly incorporated into a speaker design.

The speed of sound through Beryllium is nearly 2.5 times faster than the speed of sound through aluminum or titanium. This means the first breakup will occur at a much higher frequency — well outside the audible range. Breakup occurs when the cone partially vibrates at certain audible frequencies and therefore isn’t entirely pistonic throughout its range. This leads to non-linearities in the amplitude response as well as stored energy in the time domain.

It is precisely these characteristics that give Beryllium speakers the ability to reproduce amazing detail and provide sound clarity with the absence of resonances.

The post Black Swan Be Pro-Active Ext appeared first on Wave Electronics Systems.

The 15 Be PRO ACTIVE EXT ON WALL is an extremely impressive and extraordinary performing musical speaker system, that leaves nothing to be desired.

This 15″point source axisymmetric speaker has been designed as screen speaker for large theaters as left, center and right speaker or can be used for very large theaters as a surround speaker.

Beryllium (Be)

Although it is one of the most expensive materials used to make speaker diaphragms, in terms of stiffness-to-weight ratio, Beryllium is the highest of any known metal and can deliver dramatically superior results when properly incorporated into a speaker design.

The speed of sound through Beryllium is nearly 2.5 times faster than the speed of sound through aluminum or titanium. This means the first breakup will occur at a much higher frequency—well outside the audible range. Breakup occurs when the cone partially vibrates at certain audible frequencies and therefore isn’t entirely pistonic throughout its range. This leads to non-linearities in the amplitude response as well as stored energy in the time domain.

It is precisely these characteristics that give Beryllium speakers the ability to reproduce amazing detail and provide sound clarity with the absence of resonances.

The post 15 Be Pro Active Ext On Wall appeared first on Wave Electronics Systems.

The 12″ point source axi-symmetric speaker has been designed as screen speaker for mid and large theaters as left, center and right speaker or can be used for very large theaters as a surround bed speaker.

The12 BE PRO ACTIVE EXT is an extremely impressive and extraordinary performing musical speaker system, that leaves nothing to be desired. The EXT designation signifies that the onboard DSP/Amplifier of The12 BE PRO ACTIVE version is instead placed in a rack, with options for power output and channel count, with speaker wires directly connecting them.

Beryllium:

Although it is one of the most expensive materials used to make speaker diaphragms, in terms of stiffness-to-weight ratio, Beryllium is the highest of any known metal and can deliver dramatically superior results when properly incorporated into a speaker design.

The post 12 Be Pro Active Ext On Wall appeared first on Wave Electronics Systems.

The driver design is perfect for wide angle axi-symmetric radiation to cover a large listening area, with its 30-degree pre-angle meeting the requirements of most 3D home theater builds according to current CEDIA, Dolby and DTS specs.

The very flexible speaker mounting and orientation options ensure best possible localization, immersion, and tonal balance at the main listening position while minimizing localization shifts for side seats.

The12 BE PRO ACTIVE EXT WEDGE is an enormously dynamic and powerful speaker. Its high efficiency and high-power handling allow it to reach reference volume levels and obtain an impressive cinema sound experience even with low amplifier power.

The post 12 Be Pro Active Ext Wedge appeared first on Wave Electronics Systems.

The extreme performance of the THE BLACK SWAN ACTIVE EXT RC with two 15″ woofer units sets with its maximum sound pressure level of 140 dB (Mid / Low) new standards.

Each BLACK SWAN channel is capable of incredible SPL levels, but also the more impressive dynamic contrasts from whispering dialogues to explosive effects. The volume ranges your home theatre speakers needs to be able to handle without audible distortion is huge, especially if you look for a reference level director’s cut performance – this level difference from softest to loudest sounds is called ‘dynamic range’. The THE BLACK SWAN RC reproduces every possible dynamic range with ease. Even the most complex film passages with extreme dynamic requirements are reproduced at the highest clarity and lowest distortion. Imagine a life-like drum solo rendered exactly to the point by hearing and feeling the tremendous dynamic leaps of a bass drum and snare, while at the same time the humming of the cymbals fading away airily into the dark silence of the room giving way to the tiniest fine details.

This very precision lets the listener immerse entirely into the direct and intense visual action. Whether film or music – this sonic experience is not distinguishable from reality anymore.

The expertly engineered 4” mid-high unit is arranged next to the 15-inch mid-woofer units. All drivers are driven by a separate (not included) DSP-controlled three-channel amplifier. Their results merge perfectly and allow for a time and phase-coherent lifelike reproduction of all acoustic events with reference level in every seat. The brain can therefore relax and stop trying to process the timing and phase errors far too common in other speaker designs.

The post Black Swan Pro-Active Ext Reference Cinema appeared first on Wave Electronics Systems.