A Vision Born from Innovation

The inspiration for this revolutionary subwoofer came from a conversation at the ISE Show with Trinnov CEO Arnaud Laborie, where we explored new ways to enhance bass performance. The result? A subwoofer design like nothing the world has seen before. After extensive research and experimentation, we developed a 28” composite sandwich cone, built from multiple layers of rohacell. With the cone area equivalent to a 32” round subwoofer, this masterpiece is engineered to push the boundaries of what’s possible in low-frequency sound reproduction.

Unmatched Performance in Any Space

Whether you’re creating a subwoofer cluster for a shallow, wide, and high wall of bass or integrating it into Trinnov WaveForming, Dirac ART, double bass arrays, or single bass arrays, this subwoofer stands as the ideal solution. It delivers the highest output while occupying minimal space, making it perfect for even the most space-conscious home theater setups.

Imagine a subwoofer that can effortlessly reproduce single-digit infrasonic frequencies, delivering earth-shaking bass that you can feel in your bones. At the same time, it can soar well above the LFE cutoff frequency of 120Hz, serving as the ultimate kick woofer. Whether it’s the rumble of a distant explosion or the sharp crack of a gunshot, this subwoofer brings every sound to life with stunning clarity and power.

Designed for Perfect Integration

We designed this subwoofer to be versatile and easy to integrate into any home theater system. Its unique construction allows for woofers to be spaced very closely together, achieving perfect coupling for bass array systems with control up to 120Hz. And with an overall depth of just 30 cm / 11,81 inch, it’s a perfect fit even in challenging installations. Despite its compact design, the subwoofer boasts outside dimensions of 80 cm / 37,80 inch wide and 100 cm / 39,37 inch high, making it a powerhouse of sound in a surprisingly sleek package.

Feel Every Beat, Every Moment

The engineering behind this subwoofer is nothing short of extraordinary. We’ve harnessed an immense amount of power in the motor structure, giving it the muscle needed to accelerate the cone, motor mass, and coupled air mass with lightning speed. This results in a subwoofer that produces a perfect planar wave front, with high efficiency, ultra-high-power handling, and very low system Q. The shallow roll-off, combined with ultra-dynamic response, means that every sound—from the subtlest whisper to the most intense action scene—hits with native speed, attack, and impact that other woofers simply can’t match.

Why Settle for Ordinary? Experience the Extraordinary.

This isn’t just about sound—it’s about emotion. It’s about feeling every moment of your favorite movie, every note of your favorite song, in a way that’s so real, it’s almost tangible. This Ascendo subwoofer is a gateway to a deeper, more immersive audio experience. Don’t just watch your movies; live them. TECHNICAL DATA
Speaker type

28″ forward-firing, advanced carbon rohacell composite sandwich flat panel cone, neodymium motors with quad 4” ultra-high-temperature voice-coil

Xmax

22mm Xmax excursion each direction (44 mm linear), voice coil remaining in homogeneous magnetic field

Passive | Active

Passive

Recommended amplifiers

1Ch Amplifier is required. Min. recommended amplifier: 141 Vrms, 200 Vpk, 17.7 A; equivalent to 2500W@8 Ohm, up to 450V Peak. Other configuration can be 2 x 4 Ohms with 2 x 250V Peak (2 x 178V RMS)

Recommended ASCENDO amplifiers

(With DSP-4D: AIA2-10K2 IS), DSP4-10K2

Principle

Sealed

SPL (Peak / half space 2pi)

Measurement data
140 dB @80 Hz and up
123 dB @ 20Hz
100 dB @ 11Hz
Please refer to our measurement report for more details

Frequency range

Measurement data (without DSP)
38 Hz – 640 Hz / -10 dB

Efficiency

91.8 dB / 1W/m 4 pi, 97.8 dB / 1W/m 2

Power handling

30kW Peak

Impedance

4 Ω

Air volume displacement

11.7 L / 713 cu in comparison 18″ standard cinema subwoofer 1,1 L

Directivity horizontal x vertical in Deg°

360°

Input terminal

4-conductor Phoenix 10 AWG (5,26 mm²)

Enclosure

Internally braced MDF

Width

37,80 ” | 800 mm

Hight

39,37 ” | 1000 mm

Hight with feet

39,96 ” | 1015 mm

Depth without grill

11,81 ” | 300 mm

Weight

308,65 lbs | 140 kg

Finish

Satin matte black

Technical modifications subject to change without further notice

The post THE 28 SUB PRO SQUARED appeared first on Wave Electronics Systems.

THE 80 is hands down the most powerful and precise cinema subwoofer in the world. Its incredible speed, definition, and authority, paired with its ability to clearly differentiate frequencies in the single-digit frequency range is mind-blowing. (Yes, speed.)

With an ultra-low resonance frequency, combined with a 21” voice coil motor design and critically damped enclosure concept, this mega subwoofer delivers an extremely fast impulse response and class-leading low group delay compared to any subwoofer on the market. It is mind-bending to experience the ease with which THE 80 is able to reproduce the lowest frequencies, literally down to 1 Hz. THE 80 SUB PRO PASSIVE INFRASONIC SEALED – At the forefront of authentic infrasonic subwoofer technology, and an essential foundation of performance and experience in any world-class home theater. SPECIFICATIONS
Speaker type

Custom-built 80″ woofer with dual 21″ voice coil

Xmax

35 mm excursion each direction, voice coil remaining in homogeneous magnetic field, linear and lowest distortion

Passive | Active

Passive, rack mount 2 x 10.000 Watt AES67 DSP/Amplifier included

Principle

Sealed

SPL

Calculated data example, custom enclosure dependent
145 dB cont. / 148 dB peak
138 dB @20 Hz
114 dB @5 Hz

Frequency Range

Calculated data example, custom enclosure dependent
1Hz – 100Hz

Efficiency

105 dB / 1W/m

Power handling

20.000 W

Impedance

Dual Voice Coil, 4 Ω each

Air volume displacement

172 L / in comparison 21″ standard cinema subwoofer 1,76 L

Dimension

Complete custom design of enclosure for desired installation, for dealer/contractor build locally, minimum 10 m³

Weight 80″ Woofer

573 lbs | 260 kg

Technical modifications subject to change without further notice

The post THE 80 SUB PRO PASSIVE INFRASONIC SEALED appeared first on Wave Electronics Systems.

Due to its ultra-low resonance frequency and its sealed braced enclosure concept, this mega subwoofer delivers an extremely fast impulse response and class leading low group delay compared to any subwoofer out in the market. It’s absolutely unique and fascinating with which ease the The50 SUB PRO PS is able to reproduce the lowest frequencies literally down to 1 Hz. With each maximum stroke, the The50 SUB PRO PS moves as much air as forty standard 18″ subwoofers. This incredibly massive bass power hardly ever reaches the limit. The The50 SUB PRO PS renders with high-resolution, finely structured and explosively fast. If required, with peak levels up to 140 dB and amazing 105 dB LFE reference level of sound pressure at 5 Hz in larger rooms substantiate its unique position on the market.

The The50 SUB PRO PS redefines efficiency and sensitivity in low bass reproduction. With its extremely high speed and low frequency resolution, it enriches all state-of-the-art home theaters and shifts their low-frequency performance to an unprecedented new level. It is the perfect upgrade option for existing world class home theaters.

The50 SUB PRO PS – The forefront of authentic infrasonic subwoofer technology SPECIFICATIONS (selection)
Speaker type

Custom-built 50″ woofer with dual 13,5″ voice coil

Xmax

35 mm excursion each direction, voice coil remaining in homogeneous magnetic field, linear and lowest distortion

Passive | Active

Passive, rack mount 2 x 10.000 Watt AES67 DSP/Amplifier included

Principle

Sealed

SPL

Calculated data example, custom enclosure dependent
136 dB cont. / 140 dB peak
125 dB @20 Hz
105 dB @5 Hz

Frequency range

Calculated data example, custom enclosure dependent
5Hz – 100Hz

Efficiency

101 dB / 1W/m

Power handling

20.000 W

Impedance

Dual Voice Coil, 4 Ω each

Air volume displacement

47,2 L / in comparison 21″ standard cinema subwoofer 1,76 L

Dimension

Complete custom design of enclosure for desired installation, for dealer/contractor build locally, minimum 2 m³

Weight

360 lbs | 163 kg

Technical modifications subject to change without further notice

The post The50 SUB PRO PASSIVE SEALED infrasub appeared first on Wave Electronics Systems.

Key figures: 82 cm / 32″ custom-built super-woofer, 90 mm of linear travel – the world record for home theater or even commercial cinema subwoofers. The The32 SUB PRO plays in its own league. Authority and impact, speed, dynamics and differentiation, all these attributes the The32 SUB PRO evolves when playing down to the deepest notes in the single digit range. This opens up a new world in lowest bass reproduction. Any comparison will illustrate the sovereignty of its infrasonic bass capabilities.

Displacing an incredible volume of 16.6 liters or half a cubic foot, the The32 SUB PRO pushes as much air per maximum stroke as fifteen standard 18″ subwoofers. The The32 SUB PRO allows not only to reproduce lower frequencies, but also a much faster group delay at the same frequencies than the commonly used 18”, 15” and 12″ subwoofers in todays home theater and commercial cinema configurations.

The performance of the The32 SUB PRO is unparalleled. This infrasub complements both state-of-the-art cinemas or home theater setups to extend LFE channel reproduction or benefits the best high-end speakers. It dramatically improves the overall performance of all speaker systems.

The32 SUB PRO – more depth, image, structure, resolution, volume, dynamics equals more fun TECHNICAL DATA
Speaker type

32″ forward-firing woofer, with dual 6,5″ voice coil

Xmax

45 mm Xmax excursion each direction (90 mm linear), voice coil remaining in homogeneous magnetic field

Passive | Active

Passive

Recommended amplifiers

2 Amp. channels are required. minimum recommended amplifier voltage swing: 2 x 109 Vrms, 154 Vpk, 27,3 A; equivalent to 3000W@4Ohms per channel, total 6000W with correct RMS & Peak limiter settings (up to 450V = 20kW peak)

Recommended ASCENDO amplifiers

DSP4-10K2, DSP4-20K2

Principle

Sealed

SPL (Peak / half space 2 pi)

Measurement Data
140 dB @32Hz and up
125 dB @20 Hz
109 dB @10 Hz

Frequency range

Measurement Data (without ext. DSP)
28 Hz – 500 Hz / -3 dB
20 Hz – 500 Hz / -15 dB”

Efficiency

92 dB / 1W/m 4 pi and 98 dB / 1W/m 2 pi

Power handling

2 x 3000 W up to 2 x 10kW peak

Impedance

Dual voice coil, 4 Ω each

Air volume displacement

16,6 L / in comparison 18″ standard cinema subwoofer 1,1 L

Directivity horizontal x vertical in Deg°

360°

Input terminal

Neutrik NL4 MP

Enclosure

Internally braced birch ply and MDF

Width

37,40 ” | 950 mm

Hight

47,24 ” | 1200 mm

Hight with feet

48,23 ” | 1225 mm

Depth without grill

21,65 ” | 550 mm

Depth with plug

21,65 ” | 550 mm

Weight

339,51 lbs | 154 kg

Finish

Structural paint black

Custom colour options

Piano lacquer, colour of choice, matt or other finishes upon request

Shape customization

Upon request

Mounting

Floor standing with feet

Technical modifications subject to change without further notice

The post The32 SUB PRO PASSIVE SEALED infrasub appeared first on Wave Electronics Systems.

Its huge cone surface area and huge 90 mm of linear stroke – represents a world record for cinema subwoofers – allow it to move a gigantic volume of 10 liters of air per stroke to pressurize the room. Due to its ultra-low resonance frequency and its sealed enclosure design the group delay is several times faster than the smaller 18″, 15″ or 12″ subwoofers at the same frequency. Also the acoustic power output per cubic inch is by far in favour of this unique design compared to stacked multiple smaller subwoofers.

Its ingenious design allows the The24 SUB PRO to produce frequencies in the infrasonic frequency range with authority, reaching down lower than subwoofers with a smaller diaphragm surface ever will. At the same time this infrasub renders those notes with much more power, structure and resolution.

The The24 SUB PRO ideally suits not only all types and sizes of cinemas, but also high-end stereo systems. Much of the spacial room information of the recording envirnment in a great audiophile recording is contained in the sub 30Hz audio band. You will hear more details in mid and high frequencies. TECHNICAL DATA
Speaker type

24″ forward-firing woofer, with dual 5″ voice coil

Xmax

45 mm excursion each direction (90 mm linear), voice coil remaining in homogeneous magnetic field, linear and lowest distortion

Passive | Active

Passive

Recommended amplifiers

2 Amp. channels are required. minimum recommended amplifier voltage swing: 2 x 109 Vrms, 154 Vpk, 27,3 A; equivalent to 3000W@4Ohms per channel, total 6000W with correct RMS & Peak limiter settings (up to 450V = 20kW peak)

Recommended ASCENDO amplifiers

DSP4-10K2

Principle

Sealed

SPL (Peak / half space 2 pi)

Measurement data
140 dB @32Hz and up
120 dB @20 Hz
104 dB @10 Hz

Frequency range

“Measurement Data (without ext. DSP)
28 Hz – 500 Hz / -3 dB
20 Hz – 500 Hz / -15 dB”

Efficiency

90 dB / 1W/m

Power handling

2 x 2500 W

Impedance

Dual voice coil, 4 Ω each

Air volume displacement

9,9 L / in comparison 18″ standard cinema subwoofer 1,1 L

Directivity horizontal x vertical in Deg°

360°

Input terminal

Neutrik NL4 MP

Enclosure

Internally braced birch ply and MDF

Width

29,53 ” | 750 mm

Hight

43,31 ” | 1100 mm

Hight with feet

44,29 ” | 1125 mm

Depth without grill

19,69 ” | 500 mm

Depth with plug

19,69 ” | 500 mm

Weight

255,74 lbs | 116 kg

Finish

Structural paint black

Custom colour options

Piano lacquer, colour of choice, matt or other finishes upon request

Shape customization

Upon request

Mounting

Floor standing with feet

Technical modifications subject to change without further notice

The post The24 SUB PRO PASSIVE SEALED infrasub appeared first on Wave Electronics Systems.

A Vision Born from Innovation

The inspiration for this revolutionary subwoofer came from a conversation at the ISE Show with Trinnov CEO Arnaud Laborie, where we explored new ways to enhance bass performance. The result? A subwoofer design like nothing the world has seen before. After extensive research and experimentation, we developed a 28” composite sandwich cone, built from multiple layers of rohacell. With the cone area equivalent to a 32” round subwoofer, this masterpiece is engineered to push the boundaries of what’s possible in low-frequency sound reproduction.

Unmatched Performance in Any Space

Whether you’re creating a subwoofer cluster for a shallow, wide, and high wall of bass or integrating it into Trinnov WaveForming, Dirac ART, double bass arrays, or single bass arrays, this subwoofer stands as the ideal solution. It delivers the highest output while occupying minimal space, making it perfect for even the most space-conscious home theater setups.

Imagine a subwoofer that can effortlessly reproduce single-digit infrasonic frequencies, delivering earth-shaking bass that you can feel in your bones. At the same time, it can soar well above the LFE cutoff frequency of 120Hz, serving as the ultimate kick woofer. Whether it’s the rumble of a distant explosion or the sharp crack of a gunshot, this subwoofer brings every sound to life with stunning clarity and power.

Designed for Perfect Integration

We designed this subwoofer to be versatile and easy to integrate into any home theater system. Its unique construction allows for woofers to be spaced very closely together, achieving perfect coupling for bass array systems with control up to 120Hz. And with an overall depth of just 30 cm / 11,81 inch, it’s a perfect fit even in challenging installations. Despite its compact design, the subwoofer boasts outside dimensions of 80 cm / 37,80 inch wide and 100 cm / 39,37 inch high, making it a powerhouse of sound in a surprisingly sleek package.

Feel Every Beat, Every Moment

The engineering behind this subwoofer is nothing short of extraordinary. We’ve harnessed an immense amount of power in the motor structure, giving it the muscle needed to accelerate the cone, motor mass, and coupled air mass with lightning speed. This results in a subwoofer that produces a perfect planar wave front, with high efficiency, ultra-high-power handling, and very low system Q. The shallow roll-off, combined with ultra-dynamic response, means that every sound—from the subtlest whisper to the most intense action scene—hits with native speed, attack, and impact that other woofers simply can’t match.

Why Settle for Ordinary? Experience the Extraordinary.

This isn’t just about sound—it’s about emotion. It’s about feeling every moment of your favorite movie, every note of your favorite song, in a way that’s so real, it’s almost tangible. This Ascendo subwoofer is a gateway to a deeper, more immersive audio experience. Don’t just watch your movies; live them. TECHNICAL DATA
Speaker type

28″ forward-firing, advanced carbon rohacell composite sandwich flat panel cone, neodymium motors with quad 4” ultra-high-temperature voice-coil

Xmax

22mm Xmax excursion each direction (44 mm linear), voice coil remaining in homogeneous magnetic field

Passive | Active

Passive

Recommended amplifiers

1Ch Amplifier is required. Min. recommended amplifier: 141 Vrms, 200 Vpk, 17.7 A; equivalent to 2500W@8 Ohm, up to 450V Peak. Other configuration can be 2 x 4 Ohms with 2 x 250V Peak (2 x 178V RMS)

Recommended ASCENDO amplifiers

(With DSP-4D: AIA2-10K2 IS), DSP4-10K2

Principle

Sealed

SPL (Peak / half space 2pi)

Measurement data
140 dB @80 Hz and up
123 dB @ 20Hz
100 dB @ 11Hz
Please refer to our measurement report for more details

Frequency range

Measurement data (without DSP)
38 Hz – 640 Hz / -10 dB

Efficiency

91.8 dB / 1W/m 4 pi, 97.8 dB / 1W/m 2

Power handling

30kW Peak

Impedance

4 Ω

Air volume displacement

11.7 L / 713 cu in comparison 18″ standard cinema subwoofer 1,1 L

Directivity horizontal x vertical in Deg°

360°

Input terminal

4-conductor Phoenix 10 AWG (5,26 mm²)

Enclosure

Internally braced MDF

Width

37,80 ” | 800 mm

Hight

39,37 ” | 1000 mm

Hight with feet

39,96 ” | 1015 mm

Depth without grill

11,81 ” | 300 mm

Weight

308,65 lbs | 140 kg

Finish

Satin matte black

Technical modifications subject to change without further notice

The post THE 28 SUB PRO SQUARED appeared first on Wave Electronics Systems.