The typical applications of IP68 busbar trunkings are:

Outdoor (in different extreme conditions);
Industrial plants;
Petrochemical plants;
Chemical plants;
In areas with risk of flooding.

The post RCP – IP68 resin busbars appeared first on Wave Electronics Systems.

Characterized by an extra-compact design and available with aluminium or copper conductors, it is the solution dedicated to high power distribution, thanks to the wide availability of capacities ranging from 630 A up to 6300 A. The XCP busbar trunking system consists of 2 different product lines: XCP-S and XCP-HP. While maintaining the same basic characteristics, such as the range of rated current, the construction materials and the same amount of accessories available, XCP-S and XCP-HP have different properties that make them able to satisfy all the demands of the world market.

XCP-S is the optimised solution for the most common performance requirements. The optimised sections of internal conductors allow this busbar to be lighter and more compact than XCP-HP, making it the right choice for standard applications.

XCP-HP is the busbar system characterised by higher performance on energy saving and higher short circuit withstand. It is designed to work at 50 °C of ambient temperature. Thanks to these features, XCP-HP is the ideal solution for heavy duty applications, higher temperature environments and installations where high energy efficiency is required.

The post XCP – High power busbars appeared first on Wave Electronics Systems.

The special feature is in fact a slit in the lower part of the busbar which allows a current provision trolley to slide inside it.

The TS range has an high electrical and mechanical strength and can be used in a wide range of solutions, thanks to the availability of curved elements for change of direction, and the many sliding junction elements.

The post TS: medium power busbars appeared first on Wave Electronics Systems.

The range of MR junction boxes is very large, to satisfy all customer needs. The MR range is the ideal solution in the vertical (riser column) applications, which do not require busbar blocking elements, or thermal expansion elements.

The monobloc that distinguishes the range compensates the thermal expansion of conductors.

The typical applications where the MR busbars can be used are:

Industries;
Skyscrapers;
Hospitals;
Data center;
Shopping centres..
And everywhere there is the need for power distribution (up to 1000A).

The post MR: medium power busbars appeared first on Wave Electronics Systems.

Thanks to its characteristics, and the wide range of accessories and junction boxes available, the MS range is the best compromise in all the medium power applications of the service sector.

With the MS range, there is absolute confidence that the power is distributed in a safe way, with the best performance.

The post MS: medium power busbars appeared first on Wave Electronics Systems.

With LBplus data there is a reduction of both energy consumption and energy waste, thanks to the automatic management of lighting.

The post Lbplus data: low power busbars appeared first on Wave Electronics Systems.

Extremely flexible, with 10, 16 and 25 A tap-off plugs, it can adapt the system to any changes in the room. The construction characteristics of this busbar system make it possible for it to be used in a wide range of solutions, from small/medium service sector applications (offices, hotels, sports establishments, shopping centres), up to industrial dwellings (factories, workshops, production plants

The post Lbplus: low power busbars appeared first on Wave Electronics Systems.

With the Home + Control App your customer will be able to:

activate and customize 8 scenarios (4 pre-set and 4 customizable);
display and control the status of lights, loads connected to sockets and powered directly from the electrical panel;
monitor the total home consumption and the consumption of one or more individual power lines;
receive notifications on the load and system status;
define priority and secondary loads, which the system will automatically disconnect and reconnect in order to avoid annoying blackouts.

The post Smart electrical panel BTDIN with Netatmo appeared first on Wave Electronics Systems.

Available also in the Wi-Fi connected version: you can manage the main video internal unit functions directly from your smartphone inside and outside home.

All kits can be expanded with additional entrance panel and CCTV camera plus the dedicated additional internal units (up to 2 additional internal units for apartment).

One family solutions (easily expandable to two family system);
Colour video 2 wires solutions;
Metal entrance panel with wide angle colour camera (95°), rainshield and customizable backlit name tag for 1 or 2 family houses;
Very easy installation;
PLUG-IN power supply (European and UL standard plug versions);
Double opening (door and gate);
7” & 10” Touch screen, 7” mirror & white and 4.3” hands-free video internal units;
7’’ white & black Wi-Fi connected video internal units;
All the internal units are interchangeable and compatible with each other

The post Plug-in easy kits appeared first on Wave Electronics Systems.

Using the Home + Control App and smartphone, you can easily create programs to have a smarter level of home climate management, even when you are away from home.
You can also control Smarther with Netatmo with your voice through the voice assistants of Google, Amazon and Siri from Apple.

Available in 3 colors:

Art. XW8002 (white), Art. XG8002 (black), Art. XM8002 (sand) for flush mounting installation
Art. XW8002W (white) for the wall mounting installation
Main features:

Temperature control and regulation anywhere and anytime;
Voice command and geolocation;
Control via smartphone with APP Home + Control;
Innovative Boost function;
Indication of the degree of humidity in the environment;
Management of multiple thermostats in the same house;
Management of thermostats installed in different homes;
Management of Netatmo smart radiator valves for control in every room
Recessed or wall-mounted installation;
Power supply 230Va.c.

The post Smarther With Netatmo: the connected thermostat appeared first on Wave Electronics Systems.