ELK Products » Relay and Timers » Wave Electronics Systems https://wave-es.com/brands/elk/relay-and-timers/ Tue, 30 May 2023 02:37:45 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://i0.wp.com/wave-es.com/wp-content/uploads/2023/03/cropped-wave-es-site-icon.png?fit=32%2C32&ssl=1 ELK Products » Relay and Timers » Wave Electronics Systems https://wave-es.com/brands/elk/relay-and-timers/ 32 32 230948800 ELK-941 https://wave-es.com/product/20934/ https://wave-es.com/product/20934/#respond Tue, 30 May 2023 01:47:02 +0000 https://wave-es.com/?post_type=product&p=20934 Alarm Output Director

The post ELK-941 appeared first on Wave Electronics Systems.

]]>

The ELK-941 separates the steady or pulsing voltage from a single alarm output and directs this into two (2) different relay outputs. This is ideal for activating a two channel long-range radio or cellular transmitter, a two channel siren, strobe light, or bell from the single alarm outputs found in most alarm control panels. A steady voltage input activates Relay 1 (typical for burglary) while a pulsing voltage input activates Relay 2 (typical for fire).

  • Separates Steady and Pulsing Voltage and directs it into Two (2) Different Relay Outputs
  • Positive or Negative Low Current Trigger
  • Two (2) SPDT Relay Outputs
  • Ideal For Two (2) Channel Long Range Radio or Cellular Transmitters
  • Option For Temporal Pulse On Relay 2
  • Low Current Output During Delay Time
  • LED Indication of Relay Status
  • Surface Mount ABS Enclosure with Snap-On Cover
  • Meets ANSI S3.41 Audible Emergency Evacuation Signals 3-Pulse Pattern
  • Lifetime Limited Warranty
  • Operating Voltage: 12 Volts DC
  • Current Draw: 96mA (both relays on)
  • Pulsing Input: .1 – 4sec. (.125-6hz)
  • Relay Contacts: Form “C”, 7A @ 30VDC, 10 A @ 125VAC
  • Size: 4.4″ x 3″x 1.15″
  • Trigger Voltage: 9 – 14VDC
  • Trigger Current: 15mA

The post ELK-941 appeared first on Wave Electronics Systems.

]]> https://wave-es.com/product/20934/feed/ 0 20934 ELK-924, ELK-9244 (four modules) https://wave-es.com/product/20930/ https://wave-es.com/product/20930/#respond Tue, 30 May 2023 01:47:01 +0000 https://wave-es.com/?post_type=product&p=20930 Sensitive Relay DPDT 12 or 24 VDC

The post ELK-924, ELK-9244 (four modules) appeared first on Wave Electronics Systems.

]]> The ELK-924 Sensitive Relay module features DPDT (Form “C”) dry contacts for general purpose switching of devices or high current loads. It operates on 12 or 24 volts DC and can be triggered with a negative or positive input at an incredible low current of only 1 milliamp.

Also available in a 4 pack (ELK-9244) which is packaged as 4 relay modules grouped on a pre-scored break-off circuit board.

  • Super Low 1.2 mA Trigger Current
  • Positive (+) Or Negative (-) Trigger Input
  • Double Form “C” Contacts DPDT
  • Heavy Duty Contact Rating
  • On Board LED Status Indicator
  • Includes Double Sided Mounting Tape
  • Mounts in Standard 2.75″ Snap Track
  • Packaged in Reusable Poly Storage Box
  • Lifetime Limited Warranty
  • Operating Voltage: 12 or 24 Volts DC, jumper selectable
  • Current Draw: 60mA (both relays on)
  • Relay Contacts: Form “C” , 7A @ 30VDC, 10 A @ 125VAC
  • Size: 1.5″ X 2.75″
  • Trigger Voltage: 5 – 24VDC
  • Trigger Current: 1.2mA @12 VDC

The post ELK-924, ELK-9244 (four modules) appeared first on Wave Electronics Systems.

]]> https://wave-es.com/product/20930/feed/ 0 20930 ELK-912, ELK-91212 (twelve modules) https://wave-es.com/product/20931/ https://wave-es.com/product/20931/#respond Tue, 30 May 2023 01:47:01 +0000 https://wave-es.com/?post_type=product&p=20931 Relay Module SPDT 12 VDC

The post ELK-912, ELK-91212 (twelve modules) appeared first on Wave Electronics Systems.

]]> The ELK-912 is a high quality 12 Volt DC relay with SPDT (Form “C”) dry contacts. It features low current draw, positive or negative activation, and is ideal for general purpose switching of devices or high current loads. Also available in a 12 pack (ELK-91212) which is packaged as multiple relay modules grouped on a pre-scored break-off circuit board.

  • Low Current Draw
  • Positive Or Negative Activation
  • Form “C” Dry Contacts
  • Elevator Style Screw Terminals
  • Great For General Purpose Switching
  • Small, Compact Size
  • Double Sided Foam Tape Provided For Mounting
  • Packaged in Reusable Poly Storage Box
  • Lifetime Limited Warranty
  • Operating Voltage: 12 Volts DC
  • Current Draw: 30mA (relay on)
  • relay Contacts: Form “C” , 7A @ 30VDC, 10 A @ 125VAC
  • Min. Pull-in Voltage: 9 VDC
  • Size: 1.1″ X 1.55 ” (28mm X 39mm) Ea.

The post ELK-912, ELK-91212 (twelve modules) appeared first on Wave Electronics Systems.

]]> https://wave-es.com/product/20931/feed/ 0 20931 ELK-912B, ELK-912B6 (six modules) https://wave-es.com/product/20932/ https://wave-es.com/product/20932/#respond Tue, 30 May 2023 01:47:01 +0000 https://wave-es.com/?post_type=product&p=20932 Relay Module SPDT 12 or 24 VDC

The post ELK-912B, ELK-912B6 (six modules) appeared first on Wave Electronics Systems.

]]> The ELK-912B is a heavy duty relay module featuring 12 or 24V DC selectable operation, SPDT Form “C” contacts, low current draw, voltage input LED, and high quality large cross-head terminals. It is ideal for general purpose switching of devices or high current loads. Also available in a 6 pack (ELK-912B6) which is packaged as multiple relay modules grouped on a pre-scored break-off circuit board.

  • High Quality Cross-head Terminals
  • 12 or 24 Vdc Selectable Operation
  • Low Current Draw
  • Voltage Input LED
  • Form “C” Dry Contacts
  • Great For General Purpose Switching
  • Small, Compact Size
  • Double Sided Foam Tape Provided For Mounting
  • Packaged in Reusable Poly Storage Box
  • Lifetime Limited Warranty
  • Operating Voltage: 12 or 24 Volts DC Nominal
  • Current Draw: 35mA, triggered (relay on)
  • Relay Contacts: Form “C” , 7A @ 30VDC, 10 A @ 125VAC
  • Min. Pull-in Voltage: 9VDC on 12V setting, 19VDC on 24V setting
  • Size: 2″ X 1.5 ” (51mm X 38mm) Ea

The post ELK-912B, ELK-912B6 (six modules) appeared first on Wave Electronics Systems.

]]> https://wave-es.com/product/20932/feed/ 0 20932 ELK-960 https://wave-es.com/product/20933/ https://wave-es.com/product/20933/#respond Tue, 30 May 2023 01:47:01 +0000 https://wave-es.com/?post_type=product&p=20933 Delay Timer Module

The post ELK-960 appeared first on Wave Electronics Systems.

]]>

The ELK-960 Delay Timer is designed to be an economical and flexible solution for any general-purpose timer application. The unit can be configured for use on 12 to 24V systems, with positive or negative trigger logic. Positive triggers can be as low as 4.5V. Setup is quick and easy with thumbwheel adjustment between 1 and 60 seconds. A quick jumper setting converts the time from seconds to minutes. The Timer can be configured to activate once for each trigger, or free-run as soon as power is applied. Relay can be configured to be normally on or normally off.

  • 12 to 24 Volt DC Operation
  • Adjustable Time Delay
  • SPDT (Form “C”) Relay
  • Low Current Input Trigger (<1ma)
  • Selectable Positive or Negative trigger
  • Selectable Initial Relay State: ON / OFF
  • Operating Modes: One-Shot or Repeat
  • LED Indication of Relay State
  • Lifetime Limited Warranty
  • Operating Voltage: 12 to 24 Volts DC.
  • Current Draw: 40 mA DC with relay on.
  • Time Settings: 1 to 60 Seconds or 1 to 60 Minutes.
  • Relay Contacts: Form “C”, 7A @ 30VDC, 10 A @ 125VAC.
  • Size: 3″ x 2.2″ x 1″ (Fits Standard. Snap Track).
  • Trigger Voltage: 4.5 – 24VDC.

The post ELK-960 appeared first on Wave Electronics Systems.

]]> https://wave-es.com/product/20933/feed/ 0 20933 ELK-9200 https://wave-es.com/product/elk-9200/ https://wave-es.com/product/elk-9200/#respond Sun, 12 Feb 2023 05:14:42 +0000 https://wave-es.com/new/product/elk-9200/ Heavy Duty Relay/Contactor

The post ELK-9200 appeared first on Wave Electronics Systems.

]]> The ELK-9200 is a Heavy Duty Relay/Contactor inside a lockable metal enclosure. It is designed for remotely controlling high current devices such as electric water heaters, pumps, motors, gates, etc. The energizing coil of the 9200 is 110 VAC, however its relay contacts are capable of switching 220 VAC at up to 30 Amps of current.

The post ELK-9200 appeared first on Wave Electronics Systems.

]]> https://wave-es.com/product/elk-9200/feed/ 0 18981