DESCRIPTIONS

• SmartPath IRC 4.0 IR receiver
• 4 IRE-3.0 IR emitters
• AT-1.0 amplified terminator
• Tabletop adapter, flush-mount adapter, TV-mount adapter
• PTP-1 plug-to-plug jumper
• Power supply
• IR parallel block

FEATURES

• Compatible with most plasma, LCD, LED, OLED and DLP TVs as well as most CFL light bulbs for wide-ranging use.
• Universal IR kit
• Includes all of the components necessary for a 1-room system setup.
• Included tabletop, flush-mount and TV-mount snap-in adapters
• Allows you to mount the IR receiver virtually anywhere to suit your spatial requirements

The post ELT00001 appeared first on Wave Electronics Systems.

This MRA is the first to integrate multi-room audio along with home theater control in a way that is simple to set up and brilliant to listen to.

A job that might have once required hours of programming has been distilled down to a simple execution. For larger homes, two MRAs can be paired to create a six-source, 12-zone system. That means 12 rooms with music porting into each of them. Additionally, all zones are equipped with fixed or variable pre-outs, making it simple to add power and volume with one of our new SpeakerCraft Amplifiers (SC2-50, SC2-100, SC2-150, SC12-30, or SC16-50).

SPECIFICATIONS

Dimensions: 17 1/4″W x 4 15/16″H x 12 7/8″D with feet  (437 x 100 x 328 mm)
Rackmount Dimensions: 17 1/4″W x 3 1/2″H (2U) x 12 7/8″D without feet(437 x 88 x 328 mm)
Weight: 18 lbs. (8,6 kg)
Power Supply: 100-120 / 220-240 V~, 50 / 60 Hz
Fuse Rating: T5 AL, 250 V~
Power Consumption: 200 W
Amplifier Power Output: 30 watts/ch @ 8 ohms
: 45 watts/ch @ 4 ohms
THD: <0.10%, 1 watt output into 8 ohms
Signal to Noise Ratio: >100db, 20Hz-20kHz unweighted
Audio Source Inputs: 6 – analog, RCA connectors
Audio Zone Outputs: 6 – 4 Amp + Preamp, 2 Preamp Only
Speaker Connections: (4) detachable, (4) pole terminals
IR Outputs: 6 routable
Ethernet: 1 RJ-45 10/100 BaseT
USB: 1 Type-A

The post MRA-664 appeared first on Wave Electronics Systems.

Bass is meant to be felt and drive the audio experience to new levels. Where you place a subwoofer has a huge impact on sound quality, but sometimes you canÕt get a cable to the optimal subwoofer location. With the SpeakerCraft¨ wireless audio subwoofer kit, you can place the sub in a location that achieves the best possible sound for the room.

Simply connect the transmitter at your A/V source and the receiver to your subwoofer and you’re ready for plug-and-play bass. All you need is a power source for the sub and you unlock the freedom to strategically place the subwoofer in its optimal location. Each transmitter supports up to four receivers for use with multiple subwoofers.

Get more bass from any space!

FEATURES

• Wireless Connectivity Ð Transmit audio from the source to the sub with a range of 30ft.
• Multiple receivers Ð Each transmitter can support up to 4 receivers. Individual receivers are available separately.
• Interference Free – 5Ghz FHSS Technology for a robust wireless connectionÊ
• Designated Mount – Our Subwoofers have a mounting solution built-in to support the wireless receiver
• USB Powered Ð Plug the receiver directly into the SubwooferÕs USB port for power

SPECIFICATIONS

Modulation: 5 GHz Frequency Hopping; QPSK (DSSS) digital radio
Operating Frequency : 5 .150-5 .250 GHz, 5 .725-5 .875 GHz
Transmission Power: 9 dBm
Frequency Response: 10 Hz – 900 Hz
Channel Width : <22 MHz
Latency : <20 ms
Range : 30ft / 10m Max Indoor Use Only
S/N Ratio : 84dB
Max input Signal: 1 .84V
Dimensions Receiver : 1 .4 in x 2 .7 in x 3 .5 in (34 .3mm x 68 .4mm x 88mm)

The post SC-WIR-RX-US appeared first on Wave Electronics Systems.

Bass is meant to be felt and drive the audio experience to new levels. Where you place a subwoofer has a huge impact on sound quality, but sometimes you canÕt get a cable to the optimal subwoofer location. With the SpeakerCraft¨ wireless audio subwoofer kit, you can place the sub in a location that achieves the best possible sound for the room.

Simply connect the transmitter at your A/V source and the receiver to your subwoofer and you’re ready for plug-and-play bass. All you need is a power source for the sub and you unlock the freedom to strategically place the subwoofer in its optimal location. Each transmitter supports up to four receivers for use with multiple subwoofers.
Get more bass from any space!

FEATURES

• Wireless Connectivity Ð Transmit audio from the source to the sub with a range of 30ft.
• Multiple receivers Ð Each transmitter can support up to 4 receivers. Individual receivers are available separately.
• Interference Free – 5Ghz FHSS Technology for a robust wireless connectionÊ
• Designated Mount – Our Subwoofers have a mounting solution built-in to support the wireless receiver
• USB Powered Ð Plug the receiver directly into the SubwooferÕs USB port for power

SPECIFICATIONS

Modulation: 5 GHz Frequency Hopping; QPSK (DSSS) digital radio
Operating Frequency : 5 .150-5 .250 GHz, 5 .725-5 .875 GHz
Transmission Power: 9 dBm
Frequency Response: 10 Hz – 900 Hz
Channel Width : <22 MHz
Latency : <20 ms
Range : 30ft / 10m Max Indoor Use Only
S/N Ratio : 84dB
Max input Signal: 1 .84V
Dimensions Transmitter : 1 .4 in x 3 .9 in x 3 .5 in (36 .8mm x 98 .6mm x 88mm)
Dimensions Receiver : 1 .4 in x 2 .7 in x 3 .5 in (34 .3mm x 68 .4mm x 88mm)

The post SC-WIR-SUB-KIT-US appeared first on Wave Electronics Systems.