The SpeakerCraft SC-BT-10 10” (250mm) Boom Tomb In-Ground Subwoofer features a waterproof HDPE enclosures, made from the same material used in municipal water supply lines and includes a high-flow port design in which the port and canopy assembly spreads the moving air evenly in a 360-degree pattern, thereby reducing air turbulence and eliminating annoying port noise. And the port assembly is covered by an aluminum mesh grille that allows unrestricted airflow yet prevents intrusion of bugs, animals and debris.

FEATURES

• 10” (250mm) Mica-injected Polypropylene cone woofer with NBR Surround
• Waterproof HDPE enclosure
• Buried Enclosure with critter-proof port assembly
• Optimized for use with OG-4 or OG-6 landscape speakers
• Sensitivity: 84dB
• Frequency Response: 30Hz-120Hz +/- 3dB
• Power Handling: Up to 300W
• Nominal Impedance: 8 ohms
  

SPECIFICATIONS

eneral

• Woofer Size10 (Inches)
• Woofer ConstructionMica-injected Polypropylene cone with NBR Surround
• Frequency Response30Hz-120Hz
• Impedance8 (Ohms)
• Power Handling300 (Watts)
• Sensitivity84 (dB)
• Dimensionsin/mm: 15.75 x 15.75 x 23.24 / 400 x 400 x 590.2 with canopy assembly installed

Shipping Info

• Length21.2 (Inches)
• Width22.8 (Inches)
• Height25.9 (Inches)
• Weight44.75 (Lbs)
• Unit of MeasureEach
• UPC664254021596
• Master Pack Qty

The post SC-BT-10 appeared first on Wave Electronics Systems.

The SpeakerCraft SC-BT-12 12” (300mm) Boom Tomb In-Ground Subwoofer features a waterproof HDPE enclosures, made from the same material used in municipal water supply lines and includes a high-flow port design in which the port and canopy assembly spreads the moving air evenly in a 360-degree pattern, thereby reducing air turbulence and eliminating annoying port noise. The woofer magnet is located on the vented side of the enclosure, which allows it to be cooled by airflow in and out the enclosure, adding longevity to the motor structure. And the port assembly is covered by an aluminum mesh grille that allows unrestricted airflow yet prevents intrusion of bugs, animals and debris.

FEATURES

• 12” (300mm) Mica-injected Polypropylene cone woofer with NBR Surround
• Waterproof HDPE enclosure
• Buried Enclosure with critter-proof port assembly
• Optimized for use with OG-4 or OG-6 landscape speakers
• Sensitivity: 86dB
• Frequency Response: 28Hz-120Hz +/- 3dB
• Power Handling: Up to 500W
• Nominal Impedance: 8 ohms

SPECIFICATIONS

General

• Woofer Size12 (Inches)
• Woofer Construction12″ Mica-injected Polypropylene cone with NBR Surround
• Frequency Response28Hz-100Hz
• Impedance8 (Ohms)
• Power Handling500 (Watts)
• Sensitivity86dB (dB)
• Dimensions34.8 x 15.75 x 33.76 / 884 x 400 x 857.5
   Finished Product with port installed 23.83 x 15.75 x 15.75 / 605 x 400 x 400 (sub section only)

Shipping Info

• Length1 (Inches)
• Width1 (Inches)
• Height1 (Inches)
• Weight1 (Lbs)
• UPC664254021602

The post SC-BT-12 appeared first on Wave Electronics Systems.

The SpeakerCraft SC-OG-4 features durable weatherproof design that ensures years of reliable performance. The new speakers incorporate nickel-plated brass fittings that address a common failure point among other landscape speakers that use plastic-plated fittings. The Satellites can operate in traditional 8ohm mode, but also have adjustable 70V/100V tap switch settings. This enables installation and amplification modes favored by many installers, and allows users to set the volume of each speaker individually. The 110-degree wide dispersion ensures wide audio coverage in all outdoor spaces.

FEATURES

• 4″ (100mm) Polypropylene Cone Woofer with NBR Surround
• 3/4″ (20mm) Aluminum Dome Tweeter
• Weather-Resistant Fiberglass-Reinforced ABS Enclosure
• Sensitivity: 84dB
• Frequency Response: 110Hz-20kHz +/- 3dB
• Power Handling: Up to 90W
• Nominal Impedance: 8 ohms (in Bypass Mode)
• Tap Settings: 70V/100V: 3.75W (70V only), 7.5W, 15W, 30W, 8 Ohm (Bypass)
• 110-degree wide dispersion
• Mounting accessories not included

SPECIFICATIONS

Line Voltage: : 70V/100V
Transformer Tap Settings: : 3.75W (70V only), 7.5W, 15W, 30W, 8 Ohm (Bypass)

OTHER SPECIFICATIONS

General

• Woofer Size4 (Inches)
• Woofer ConstructionPolypropylene Cone Woofer with NBR Surround
• Frequency Response110Hz- 20Khz
• Impedance8 (Ohms)
• Power Handling90 (Watts)
• Sensitivity84 (dB)
• Crossover2.8kHz
• DimensionsLxWxH, in/mm: 9.98 x 5.87 x 10.28 / 253.4 x 149.2 x 261.2 with arm extended

Shipping Info

• Length10.2 (Inches)
• Width10.2 (Inches)
• Height12.6 (Inches)
• Weight7.75 (Lbs)
• Unit of MeasureEach
• UPC664254021572
• Master Pack Qty4

Other Specifications

• Line Voltage:70V/100V
• Transformer Tap Settings:3.75W (70V only), 7.5W, 15W, 30W, 8 Ohm (Bypass)

The post SC-OG-4 appeared first on Wave Electronics Systems.

The SpeakerCraft SC-OG-6 features durable weatherproof design that ensures years of reliable performance. The new speakers incorporate nickel-plated brass fittings that address a common failure point among other landscape speakers that use plastic-plated fittings. The Satellites can operate in traditional 8ohm mode, but also have adjustable 70V/100V tap switch settings. This enables installation and amplification modes favored by many installers, and allows users to set the volume of each speaker individually. The 110-degree wide dispersion ensures wide audio coverage in all outdoor spaces.

FEATURES

• 6″ (152mm) Polypropylene Cone Woofer with NBR Surround
• 3/4″ (20mm) Aluminum Dome Tweeter
• Weather-Resistant Fiberglass-Reinforced ABS Enclosure
• Sensitivity: 87dB
• Frequency Response: 100Hz-20kHz +/- 3dB
• Power Handling: Up to 120W
• Nominal Impedance: 8 ohms (in Bypass Mode)
• Tap Settings: 70V/100V: 3.75W (70V only), 7.5W, 15W, 30W, 8 Ohm (Bypass)
• 110-degree wide dispersion
• Mounting accessories not included

SPECIFICATIONS

Line Voltage: : 70V/100V
Transformer Tap Settings: : 3.75W (70V only), 7.5W, 15W, 30W, 8 Ohm (Bypass)

OTHER SPECIFICATIONS

General

• Woofer Size6 (Inches)
• Woofer ConstructionPolypropylene Cone Woofer with NBR Surround
• Frequency Response100Hz- 20Khz
• Impedance8 (Ohms)
• Power Handling120 (Watts)
• Sensitivity87 (dB)
• Crossover2.8kHz
• DimensionsLxWxH, in/mm: 11.8 x 7.7 x 12 / 300 x 195.6 x 307 with arm extended

Shipping Info

• Length11.7 (Inches)
• Width12.2 (Inches)
• Height14.2 (Inches)
• Weight10.1 (Lbs)
• Unit of MeasureEach
• UPC664254021589
• Master Pack Qty4

Other Specifications

• Line Voltage:70V/100V
• Transformer Tap Settings:3.75W (70V only), 7.5W, 15W, 30W, 8 Ohm (Bypass)

The post SC-OG-6 appeared first on Wave Electronics Systems.