A major upgrade in both aesthetics and performance, Ruckus landscape speakers are the perfect choice for gardens, backyards, flower beds, and any other natural outdoor environment. The new rock-inspired enclosures are made of reinforced poly-resin that matches the color of the U.V. weather-resistant lacquer coating that covers the speaker. The result is a stone finish that, even if chipped or marred, will simply expose the same color and texture underneath. This means the speaker will look good and sound good for years to come. New driver elements and crossover networks have resulted in higher fidelity and greater sound pressure levels. Now the backyard can literally be filled with sound that rivals the finest indoor systems.

If you are looking to provide quality sound outdoors in almost any landscape, the Ruckus series will blend in visually and dramatically impress your customers sonically.

The RUCKUS 6 ONE SANDSTONE replaces the 620 ROX SANDSTONE.

SPECIFICATION

6 1/2″ Polypropylene Cone Woofer with Sealed Voice Coil, Rubber Surround and Silicone Encased Leads
1/2″ Polyamide Dome Tweeter with Silicone Encased Leads, Coaxially Mounted

The post RUCKUS 6 ONE SANDSTONE appeared first on Wave Electronics Systems.

A major upgrade in both aesthetics and performance, Ruckus landscape speakers are the perfect choice for gardens, backyards, flower beds and any other natural outdoor environment. The new rock inspired enclosures are made of reinforced poly-resin that matches the color of the U.V. weather-resistant lacquer coating that covers the speaker. The result is a stone finish that, even if chipped or marred, will simply expose the same color and texture underneath. This means the speaker will look good and sound good for years to come. New driver elements and crossover networks have resulted in higher fidelity and greater sound pressure levels. Now the backyard can literally be filled with sound that rivals the finest indoor systems.

If you are looking to provide quality sound outdoors in most any landscape, the Ruckus series will blend in visually and dramatically impress your customers sonically.

The granite RUCKUS 6 ONE replaces the ASM30626 620 ROX in gray.

SPECIFICATIONS

6 1/2″ Polypropylene Cone Woofer with Sealed Voice Coil, Rubber Surround and Silicone Encased Leads:
1/2″ Polyamide Dome Tweeter with Silicone Encased Leads, Coaxially Mounted:
Sensitivity: 91dB 1W/1m
Power Handling: 80 Watts
Impedance: 8 Ohms
Frequency Response: 40Hz – 20kHz
Dimensions: (H x W x D) 9 1/8″ x 13″” x 10 1/2″ (233 mm x 330 mm x 267 mm)

The post RUCKUS 6 ONE GRANITE appeared first on Wave Electronics Systems.

A major upgrade in both aesthetics and performance, Ruckus landscape speakers are the perfect choice for gardens, backyards, flower beds and any other natural outdoor environment. The new rock inspired enclosures are made of reinforced poly-resin that matches the color of the U.V. weather-resistant lacquer coating that covers the speaker. The result is a stone finish that, even if chipped or marred, will simply expose the same color and texture underneath. This means the speaker will look good and sound good for years to come.
New driver elements and crossover networks have resulted in higher fidelity and greater sound pressure levels. Now the backyard can literally be filled with sound that rivals the finest indoor systems.

If you are looking to provide quality sound outdoors in most any landscape, the Ruckus series will blend in visually and dramatically impress your customers sonically.

The Ruckus 8 One Sandstone Speaker replaces the Sandstone ROX 820.

SPECIFICATIONS

8″ Polypropylene Cone Woofer with Sealed Voice Coil, Rubber Surround and Silicone Encased Leads
1/2″ Polyamide Dome Tweeter with Silicone Encased Leads, Coaxially Mounted

The post RUCKUS 8 ONE SANDSTONE appeared first on Wave Electronics Systems.

A major upgrade in both aesthetics and performance, Ruckus outdoor landscape speakers are the perfect choice for gardens, backyards, flower beds, and any other natural outdoor environment. The new rock-inspired enclosures are made of reinforced poly-resin that matches the color of the U.V. weather-resistant lacquer coating that covers the speaker. The result is a stone finish that, even if chipped or marred, will simply expose the same color and texture underneath. This means the speaker will look good and sound good for years to come.
New driver elements and crossover networks have resulted in higher fidelity and greater sound pressure levels. Now the backyard can literally be filled with sound that rivals the finest indoor systems.

If you are looking to provide quality sound outdoors in almost any landscape, the Ruckus series will blend in visually and dramatically impress your customers sonically.

The Ruckus 8 ONE Granite replaces the SpeakerCraft 820 Rox in Gray. 

SPECIFICATIONS

8″ Polypropylene Cone Woofer with Sealed Voice Coil, Rubber Surround and Silicone Encased Leads
1/2″ Polyamide Dome Tweeter with Silicone Encased Leads, Coaxially Mounted

The post RUCKUS 8 ONE GRANITE appeared first on Wave Electronics Systems.

6-1/2” dual voice coil injection-molded TCC polypropylene woofer with butyl rubber surround for deep, low-distortion bass response.

Designed to accommodate live plants.

Weatherproof design ensures High-Performance and longevity.

SPECIFICATIONS

• Tweeter: Dual 1” Teteron Tweeters
• Woofer: 6.5” DVC TCC Polypropylene Woofer
• Recommended Amplifier Power: 10-100 Watts
• Frequency Response (+/- 3dB): 60 Hz – 21 kHz
• Impedance: 8 Ohm Stereo / L/R Summed (parallel) 4 Ohm
• Sensitivity (for 2.83V of Pink Noise): 89 dB
• Temperature Extremes: – 50° to 185° F (-45° to 85° C)
• Dimensions (L x D x H): 19.5” x 19.5” x 19.5” / 495.3 x 495.3 x 495.3 mm
• Weight: 35 lbs. (15.9 kg)
• Warranty: Limited 5 Year

The post SC-PS6Si-CONCRETE appeared first on Wave Electronics Systems.

6-1/2″ injection-molded TCC filled polypropylene cone is extremely rigid to reduce breakup and lower distortion.

Designed for extreme environmental conditions and both UV exposure and water resistance.

Artistically crafted cabinet with shaped MicroPerf aluminum grilles looks natural and realistic.

Cone Forward design positions drivers close to the grille and ensures intelligible midrange.

SPECIFICATIONS

• Tweeter: 1” Teteron Tweeter
• Woofer: 6.5” TCC Polypropylene Woofer
• Recommended Amplifier Power: 10-150 Watts
• Frequency Response (+/- 3dB): 70 Hz – 21 kHz
• Impedance: 8 Ohm
• Sensitivity (for 2.83V of Pink Noise): 89 dB
• Temperature Extremes: – 50° to 185° F (-45° to 85° C)
• Dimensions (L x D x H): 14” x 11” x 12” / 355.6 x 279.4 x 304.8 mm
• Weight: 11 lbs. (5 kg)
• Warranty: Limited 5 Year

The post SC-RS6-SANDSTONE appeared first on Wave Electronics Systems.

6-1/2″ injection-molded TCC-filled polypropylene cone is extremely rigid to reduce breakup and lower distortion.

Designed for extreme environmental conditions and both UV exposure and water resistance.

Artistically crafted cabinet with shaped MicroPerf aluminum grilles looks natural and realistic.

Cone Forward design positions drivers close to the grille and ensures intelligible midrange.

SPECIFICATIONS

• Tweeter: 1” Teteron Tweeter
• Woofer: 6.5” TCC Polypropylene Woofer
• Recommended Amplifier Power: 10-150 Watts
• Frequency Response (+/- 3dB): 70 Hz – 21 kHz
• Impedance: 8 Ohm
• Sensitivity (for 2.83V of Pink Noise): 89 dB
• Temperature Extremes: – 50° to 185° F (-45° to 85° C)
• Dimensions (L x D x H): 14” x 11” x 12” / 355.6 x 279.4 x 304.8 mm
• Weight: 11 lbs. (5 kg)
• Warranty: Limited 5 Year

The post SC-RS6-SPECKLEDGRANITE appeared first on Wave Electronics Systems.

6-1/2″ injection-molded TCC-filled polypropylene cone is extremely rigid to reduce breakup and lower distortion.

Designed for extreme environmental conditions and both UV exposure and water resistance.

Artistically crafted cabinet with shaped MicroPerf aluminum grilles looks natural and realistic.

Cone Forward design positions drivers close to the grille and ensures intelligible midrange.

SPECIFICATIONS

• Tweeter: 1” Teteron Tweeter
• Woofer: 6.5” TCC Polypropylene Woofer
• Recommended Amplifier Power: 10-150 Watts
• Frequency Response (+/- 3dB): 70 Hz – 21 kHz
• Impedance: 8 Ohm
• Sensitivity (for 2.83V of Pink Noise): 89 dB
• Temperature Extremes: – 50° to 185° F (-45° to 85° C)
• Dimensions (L x D x H): 14” x 11” x 12” / 355.6 x 279.4 x 304.8 mm
• Weight: 11 lbs. (5 kg)
• Warranty: Limited 5 Year

The post SC-RS6-GRANITE appeared first on Wave Electronics Systems.

8″ injection-molded TCC-filled polypropylene cone is extremely rigid to reduce breakup and lower distortion.

Designed for extreme environmental conditions and both UV exposure and water resistance.

Artistically crafted cabinet with shaped MicroPerf aluminum grilles looks natural and realistic.

Cone Forward design positions drivers close to the grille and ensures intelligible midrange.

SPECIFICATIONS

• Tweeter: Dual 1” Teteron Tweeters
• Woofer: 8” DVC TCC Polypropylene Woofer
• Recommended Amplifier Power: 10-200 Watts
• Frequency Response (+/- 3dB): 50 Hz – 21 kHz
• Impedance: 8 Ohm Stereo / L/R Summed (parallel) 4 Ohm
• Sensitivity (for 2.83V of Pink Noise): 89 dB
• Temperature Extremes: – 50° to 185° F (-45° to 85° C)
• Dimensions (L x D x H): 19.5” x 16.5” x 12.5” / 495.3 x 419.1 x 317.5 mm
• Weight: 16.5 lbs. (7.5 kg)
• Warranty: Limited 5 Year

The post SC-RS8Si-SHALEBROWN appeared first on Wave Electronics Systems.

8″ injection-molded TCC-filled polypropylene cone is extremely rigid to reduce breakup and lower distortion.

Designed for extreme environmental conditions and both UV exposure and water resistance.

Artistically crafted cabinet with shaped MicroPerf aluminum grilles looks natural and realistic.

Cone Forward design positions drivers close to the grille and ensures intelligible midrange.

SPECIFICATIONS

• Tweeter: Dual 1” Teteron Tweeters
• Woofer: 8” DVC TCC Polypropylene Woofer
• Recommended Amplifier Power: 10-200 Watts
• Frequency Response (+/- 3dB): 50 Hz – 21 kHz
• Impedance: 8 Ohm Stereo / L/R Summed (parallel) 4 Ohm
• Sensitivity (for 2.83V of Pink Noise): 89 dB
• Temperature Extremes: – 50° to 185° F (-45° to 85° C)
• Dimensions (L x D x H): 19.5” x 16.5” x 12.5” / 495.3 x 419.1 x 317.5 mm
• Weight: 16.5 lbs. (7.5 kg)
• Warranty: Limited 5 Year

The post SC-RS8Si-SANDSTONE appeared first on Wave Electronics Systems.