The Theory tile bridge kit allows you to install Theory in-ceiling loudspeakers quickly and safely into standard 2’ x 2’ and 2’ x 4’ drop ceilings.

Each carton contains two rails and one each ic5 C-ring and one each ic6 tile C-ring – simply select the C-ring for your model at time of installation. All necessary hardware for installation is included.

The post ic CEILING TILE BRIDGE KIT appeared first on Wave Electronics Systems.

Theory in-ceiling loudspeaker pre-construction brackets allow you to easily reserve space in the ceiling during the construction phase of the project.

Each bracket shows the loudspeaker model number so no errors are made prior to drywall.

The post ic PRE-CONSTRUCTION BRACKETS appeared first on Wave Electronics Systems.

The post sb25 UNIVERSAL MOUNT ADAPTER appeared first on Wave Electronics Systems.

The sb-STAND stand accessory allows the sb25, sb25aw, and soundbars to stand on flat surfaces such as consoles, credenzas, tabletops, and bookshelves.

Use a pair of sb-STANDs with a Theory soundbar to mount it horizontally on flat surfaces such as a piece of furniture below a flat panel.

A single sb-STAND can be used to mount the sb25 or sb25aw horizontally or vertically when mounting on speaker stands, mixing desks, bookshelves and other flat surfaces.

The post sb STAND appeared first on Wave Electronics Systems.

No ceiling? No problem. Theory optional Pendant Housings convert your Theory in-ceiling loudspeaker into a stylish, pendant-style loudspeaker in less than 5 minutes.

The post ic6 Pendant Housings appeared first on Wave Electronics Systems.

The simple to install, set-up, configure, and customize DLC-CTRL provides PoE control of a single Theory DLC amplifier zone right from the wall.

Featuring PoE technology, DLC-CTRL pairs easily to a network and allows for real-time device syncing. Users can connect up to eight DLC-CTRL units to a single Theory DLC loudspeaker controller and can allocate each DLC-CTRL to any single zone.

Change sources, manage the volume, or choose from pre-set minimum and maximum volume levels. For added security, DLC-CTRL features PIN code protection with both basic and advanced access, including a system shutdown option.

The UI screen is customizable. Set the theme to dark or light mode to suit the installation environment.

The post DLC-CTRL Wall Mount Controller appeared first on Wave Electronics Systems.

The DLC-250.8 can drive up to 32 Theory 16-ohm loudspeakers in Lo-Z mode, or up to 128 in Hi-Z mode – all from a 1U chassis!

The DLC loudspeaker controllers from Theory can be configured via its on-board web interface accessible via wired Ethernet, or via its on-board Wifi access point and includes matrix mixing, priority audio routing and ducking, parametric EQ, delay, gain and limiter DSP objects to make system optimization easy.

Full API and modules for AMX, Control4, Crestron, Crestron Home, ELAN, Q-SYS, and RTI are available.

The post DLC-250.8 AMPLIFIED LOUDSPEAKER CONTROLLER appeared first on Wave Electronics Systems.

The DLC-1500.4d is equipped with Dante / AES67 audio-over-IP digital I/O making setting up and deploying even complex distributed audio systems painless and bullet-proof. No bulky analog audio cables are required.

The DLC-1500.4d can drive up to 16 Theory 16-ohm loudspeakers in Lo-Z mode, or over 300 (!) in Hi-Z mode. You read that right, 300+ Theory speakers at 7.5W each.

The DLC loudspeaker controllers from Theory can be configured via its on-board web interface accessible via wired Ethernet, or via its on-board Wifi access point and includes matrix mixing, priority audio routing and ducking, parametric EQ, delay, gain and limiter DSP objects to make system optimization easy.

Full API and modules for AMX, Control4, Crestron, Crestron Home, ELAN, Q-SYS, and RTI are available.

The post DLC-1500.4d AMPLIFIED LOUDSPEAKER CONTROLLER WITH DANTE & AES67 appeared first on Wave Electronics Systems.

The DLC-250.4d is equipped with Dante / AES67 audio-over-IP digital I/O making setting up and deploying even complex distributed audio systems painless and bullet-proof. No bulky analog audio cables are required.

The DLC-250.4d can drive up to 16 Theory 16-ohm loudspeakers in Lo-Z mode, or up to 64 in Hi-Z mode – all from a half rack chassis!

The DLC loudspeaker controllers from Theory can be configured via its on-board web interface accessible via wired Ethernet, or via its on-board Wifi access point and includes matrix mixing, priority audio routing and ducking, parametric EQ, delay, gain and limiter DSP objects to make system optimization easy.

Full API and modules for AMX, Control4, Crestron, Crestron Home, ELAN, Q-SYS, and RTI available.

The post DLC-250.4d AMPLIFIED LOUDSPEAKER CONTROLLER WITH DANTE & AES67 appeared first on Wave Electronics Systems.

The post sub15 15” High Output Passive In-Room Subwoofer appeared first on Wave Electronics Systems.