Wyrestorm » AV Over IP » Wave Electronics Systems

NHD-250-RX

admin — Tue, 30 May 2023 12:37:59 +0000

The NHD-250-RX is an enhanced MultiView display decoder compatible with the NetworkHD 100 and 200 Series, an ultra low bandwidth H.264 AV over IP solution for distribution of point-to-point, one-to-many and many-to-many over a managed network.

The NHD-250-RX H.264 decoder is intended for use with 100 or 200 Series H.264 encoders (sold separately) to provide a complete end-to-end video distribution system. When used in conjunction with the NHD-000-CTL system controller complete control integration is simple.

AUDIO & VIDEO

Inputs

1x 8-pin RJ-45 (Transmission from TX)

Outputs

1x HDMI Out: 19-pin HDMI Type A1x Audio Out: 3-pin Terminal Block (3.5mm)

Audio Formats

2ch LPCM 48KHz

Input Video Decoding

H.264

Decoding Data Rate

Max: 30Mb/s per stream

End to End Latency (Max)

~80ms (low latency mode) | ~300ms (high quality mode)

Video Resolutions (Max)

3840x2160p @60Hz (Tile mode only)
1920x1080p @60Hz
1280x720p @60Hz
720x576p @50Hz
720x480p @60Hz

60fps Progressive: 640×480 | 800×600 | 1024×768 | 1280×800 | 1280×1024 | 1360×768 | 1366×768 | 1400×1050 | 1440×900 | 1600×1200 | 1680×1050 | 1920×1200

Maximum Pixel Clock

594MHz

COMMUNICATION & CONTROL

HDMI

HDCP 1.4 | CEC

RS-232

2x RS-232: 4-pin Terminal Block (3.5mm) | 2 Way

Ethernet

1x LAN (PoE): 8-pin RJ-45 ANSI/TIA-568 8P8C, 1000Base-T, PoE PD (IEEE 802.3af)

POWER

Power Supply

12V DC

PoE

IEEE 802.3af | (15.4W at PSE)

Max Power Consumption

6W (DC adapter)

Additional Features

MultiView capable of displaying 1 to 9 simultaneous NetworkHD 2K encoder streams on a single 4K display
Up to 6 simultaneous NetworkHD 2K encoder streams on a single 2K display in overlay mode
Ideal for commercial monitoring of remote displays within a venue from a central location to quickly verify content transmitted to screens
Multiple configurable layouts including hybrid grid layouts, PiP, PaP, arbitrary layouts and preset multiscreen arrangements
Graphic or logo can be inserted into central image placeholder for screen indication or additional branding
Configurable resolution output scaling, timing and mode
Instant switching with WyreStorm QuickSync
RS-232 with integration with leading 3rd party control systems, including the NetworkHD Touch app
CEC control of connected displays
Analog audio breakout
Configurable source audio switching
Multiple NHD-250-RX units can be combined to suit the monitoring needs of the project
Dramatically reduces the number of components required to monitor a venue – less decoders and screens – for reduced project complexity and less potential points of failure within installations
Also provides video wall-like functionality on large screens or multiple screens combined with different layouts for custom display configurations
Backwards compatible – able to be added to any existing NetworkHD 100/200 Series system
IEEE 802.3af PoE compliant PD
Includes DC power adapter and mounting bracket
Compatible with NHD-000-RACK4 rack mounting kit

The post NHD-250-RX appeared first on Wave Electronics Systems.

NHD-140-TX

admin — Tue, 30 May 2023 12:37:59 +0000

The NHD-140-TX is a 4 input to 4 network stream device encoder compatible with the NetworkHD 100 and 200 Series, an ultra low bandwidth H.264 AV over IP solution for distribution of point-to-point, one-to-many and many-to-many over a managed network. With its standards-based approach to video encoding, fast and simple system configuration and robust feature set, it provides the best value in networked video distribution.

The NHD-140-TX H.264 encoder is intended for use with 100 or 200 Series H.264 decoders (sold separately) to provide a complete end-to-end video distribution system. When used in conjunction with the NHD-000-CTL system controller complete control integration is simple.

AUDIO & VIDEO

Inputs

4x HDMI In: 19-pin HDMI Type A

Outputs

1x LAN: 8-pin RJ-45 (AV Transmission to RX)

Output Video Encoding

H.264

Encoding Data Rate

Max: 30Mb/s – per stream (120 Mb/s total)

End to End Latency (Max)

~79ms (low latency mode) | ~250ms (high quality mode)

Audio Formats

2ch LPCM 48KHz

Video Resolution (Max)

All resolutions listed are 8bit RGB.
1920x1080p @24/25/30/50/60Hz
1920x1080i @25/30Hz
1280x720p @50/60Hz
720x576p @50Hz
720x576i @25Hz
720x480p @60Hz
720x480i @30Hz
1680×1050 | 1400×1050 | 1280×1024 | 1440×900 | 1280×800 | 1366×768 | 1360×768 | 1024×768 | 800×600 | 640×480 @
60Hz:

Maximum Pixel Clock

165MHz

COMMUNICATION & CONTROL

HDMI

HDCP 1.4

Ethernet

1x LAN: 8-pin RJ-45 ANSI/TIA-568 8P8C, 1000Base-T

POWER

Power Supply

12V DC

Max Power Consumption

19.44W

ENVIRONMENTAL

Operating Temperature

0 to + 45°C (32 to + 113 °F), 10% to 90%, non-condensing

Storage Temperature

-20 to +70°C (-4 to + 158 °F), 10% to 90%, non-condensing

Maximum BTU

DIMENSIONS & WEIGHT

68 BTU/hr

Rack Units/Wall Box

<1U flat on shelf | 6U in NHD-000-RACK4 | 1U in NHD-140-RACK-1U

Height

25mm/1in

Width

215mm/8.46in

Depth

260.2mm/10.24in

Weight

1.46kg/3.21lbs

REGULATORY

Safety and Emission

CE | FCC | RCM | RoHS

Additional Features

Ultra low network bandwidth compact encoder for up to 4 simultaneous HDMI inputs
4 streams over 1 Ethernet connection reduces network switch
requirements
Hugely scalable I/O, utilizing multicast technology to allow for very large commercial AV deployments
Supports all SD and HD video formats – including interlaced content
Configurable encode bandwidth and audio delay
Seamlessly integrates with NetworkHD 100 and 200 Series decoders
NetworkHD Touch control app for live video previews with drag and drop source selection
Utilizes bandwidth-efficient H.264 encoding for visually lossless HD video distribution
Features 4x HDMI inputs to 1 output via Ethernet port
Plug and Play setup with quick networking configuration and auto
discovery of components
Live video unicast preview streams for use with NetworkHD Touch or a custom control UI
Standards-based H.264/MPEG-4 AVC video compression
Batch firmware update and batch settings functions offers a massive
reduction on installation times

The post NHD-140-TX appeared first on Wave Electronics Systems.

NHD-110-RX

admin — Tue, 30 May 2023 12:37:59 +0000

The NHD-110-RX is the AV decoder to the powerful 110 series of NetworkHD AV over IP components. The 110 series components provide H.264 or H.265 video encoding/decoding of up to 1080p60Hz content over a network. The NHD-110-RX can natively process up to a 16×16 video wall to create captivating digital landscapes and also includes a powerful video scaler to provide instant matrix switching. The 110 series components are also compatible with the NHD-250-RX multiview receiver allowing up to 9 unique streams to be sent to a single display.

AUDIO & VIDEO

Inputs

TX:
1x HDMI 19-pin HDMI type A

RX:
1x 8-pin RJ-45 female | 10/100Base-T

Outputs

TX:
1x 3-pin Phoenix Analog Audio (de-embed from HDMI input)

RX:
1 x HDMI 19-pin HDMI type A
1 x 3-pin Phoenix Analog Audio
Both HDMI and Analog outputs allow discrete audio routing from any available NHD-110-TX on the same network.

Video Encoding

Primary Stream – H.264/H.265, configurable up to 30Mbps
Preview Stream – MJPEG CIF@30Hz, configurable up to 2Mbps

End to End Latency

High Quality Mode: ~250ms
Low Latency Mode: ~80ms

Audio Formats

LPCM/MPEG4 AAC stereo, 48KHz

Video Resolution (Max)

HDMI: 1920x1080p @60Hz 8bit (15m/50ft)
Cat5e or higher: 1920x1080p @60Hz 8bit (100m/328ft)

Maximum Pixel Clock

150Mhz

AUDIO & VIDEO

Primary Stream – H.264/H.265, configurable up to 30Mbps
Preview Stream – MJPEG CIF@30Hz, configurable up to 2Mbps

COMMUNICATION & CONTROL

HDMI

HDCP 1.4 | EDID

RS-232

1x 3-Pin Phoenix – API controlled from NHD-000-CTL

LAN

1x 8-pin RJ-45 female | 10/100Base-T | PoE 802.1af

1x IR TX: 3.5mm TS Jack Socket
IR signals can be bi-directional passthrough or via API commands from NHD-000-CTL for routable IR to discrete TX/RX devices

USB

TX:
1 x Type B Host
USB v1.1 for KVM applications – bandwidth is 115200bps (routable)

RX:
2 x Type A Device Ports
USB v1.1 for KVM applications – bandwidth is 115200bps (routable)

POWER

Power Supply

PoE | 12V 1A DC

Max Power Consumption

6W (DC adapter)

Additional Features

Supports up to 1080p @ 60Hz video content
Support all SD and HD formats – including interlaced content
Flexible encoding using either H.264 or H.265 encoding. Encoding is configurable between a constant bitrate or variable bitrate.
Low bandwidth or high-quality transmission methods. Low latency ~ 80ms. High-quality ~250ms
Compatible with NHD-250-RX Multiview receiver
Analog audio de-embed for easy connection to external audio DSP or amplifier
Seamless video switching – no black screens or freeze frames
Hugely scalable I/O, utilizing multicast technology
Zero-configuration switch setup using unicast technology
Live video preview streams for use with NetworkHD Touch or a custom control UI
Flexible IP address settings: AutoIP/Static/DHCP
Customizable, IR or RS-232 control of connected devices
Infrared signal generation via API – supports Hex Global Cache format
Batch firmware update and batch settings functions offers a massive reduction on installation times
Custom EDID management with import/export
HDCP 1.4 compliant
IEEE 802.3af PoE compliant PD
Includes optional DC power adapter and mounting brackets

The post NHD-110-RX appeared first on Wave Electronics Systems.

NHD-110-TX

admin — Tue, 30 May 2023 12:37:59 +0000

The NHD-110-TX is the AV encoder to the powerful 110 series of NetworkHD AV over IP components. The 110 series components provide H.264 or H.265 video encoding/decoding of up to 1080p60Hz content over a network. The NHD-110-TX provides a low bandwidth yet incredibly high quality video stream allowing you to easily accomplish large scale AV deployments. The 110 series components are also compatible with the NHD-250-RX multiview receiver allowing up to 9 unique streams to be sent to a single display.

AUDIO & VIDEO

Inputs

TX:
1x HDMI 19-pin HDMI type A

RX:
1x 8-pin RJ-45 female | 10/100Base-T

Outputs

TX:
1x 3-pin Phoenix Analog Audio (de-embed from HDMI input)

RX:
1 x HDMI 19-pin HDMI type A
1 x 3-pin Phoenix Analog Audio
Both HDMI and Analog outputs allow discrete audio routing from any available NHD-110-TX on the same network.

Video Encoding

Primary Stream – H.264/H.265, configurable up to 30Mbps
Preview Stream – MJPEG CIF@30Hz, configurable up to 2Mbps

End to End Latency

High Quality Mode: ~250ms
Low Latency Mode: ~80ms

Audio Formats

LPCM/MPEG4 AAC stereo, 48KHz

Video Resolution (Max)

HDMI: 1920x1080p @60Hz 8bit (15m/50ft)
Cat5e or higher: 1920x1080p @60Hz 8bit (100m/328ft)

Maximum Pixel Clock

150Mhz

AUDIO & VIDEO

Primary Stream – H.264/H.265, configurable up to 30Mbps
Preview Stream – MJPEG CIF@30Hz, configurable up to 2Mbps

COMMUNICATION & CONTROL

HDMI

HDCP 1.4 | EDID

RS-232

1x 3-Pin Phoenix – API controlled from NHD-000-CTL

LAN

1x 8-pin RJ-45 female | 10/100Base-T | PoE 802.1af

1x IR TX: 3.5mm TS Jack Socket
IR signals can be bi-directional passthrough or via API commands from NHD-000-CTL for routable IR to discrete TX/RX devices

USB

TX:
1 x Type B Host
USB v1.1 for KVM applications – bandwidth is 115200bps (routable)

RX:
2 x Type A Device Ports
USB v1.1 for KVM applications – bandwidth is 115200bps (routable)

POWER

Power Supply

PoE | 12V 1A DC

Max Power Consumption

6W (DC adapter)

Additional Features

Supports up to 1080p @ 60Hz video content
Support all SD and HD formats – including interlaced content
Flexible encoding using either H.264 or H.265 encoding. Encoding is configurable between a constant bitrate or variable bitrate.
Low bandwidth or high-quality transmission methods. Low latency ~ 80ms. High-quality ~250ms
Compatible with NHD-250-RX Multiview receiver
Analog audio de-embed for easy connection to external audio DSP or amplifier
Seamless video switching – no black screens or freeze frames
Hugely scalable I/O, utilizing multicast technology
Zero-configuration switch setup using unicast technology
Live video preview streams for use with NetworkHD Touch or a custom control UI
Flexible IP address settings: AutoIP/Static/DHCP
Customizable, IR or RS-232 control of connected devices
Infrared signal generation via API – supports Hex Global Cache format
Batch firmware update and batch settings functions offers a massive reduction on installation times
Custom EDID management with import/export
HDCP 1.4 compliant
IEEE 802.3af PoE compliant PD
Includes optional DC power adapter and mounting brackets

The post NHD-110-TX appeared first on Wave Electronics Systems.

NHD-110-RX-S

admin — Tue, 30 May 2023 12:37:59 +0000

The NHD-110-RX-S is an AV decoder to the powerful 110 series of NetworkHD components. This “S” model has been treated with Sealoc’s Weatherloc technology to resist the elements such as water, moisture, humidity, dust, salt-fog, salt-air, acidic products and more. The 110 series components support either H.264 or H.265 video encoding/decoding of up to 1080p60Hz content. The NHD-110-RX can natively process up to a 16×16 video wall to create captivating digital landscapes. The 110 series components are also compatible with the NHD-250-RX multiview receiver allowing up to 9 unique streams to be sent to a single display.

High-Efficiency H.265 encoder, commonly known as MPEG-H Part 2, is a video compression standard developed as part of the MPEG-H project to replace the widely used Advanced Video Coding.

AUDIO & VIDEO

Inputs

1x 8-pin RJ-45 female | 10/100Base-T

Outputs

1 x HDMI 19-pin HDMI type A
1x 3-pin Phoenix Analog Audio
(Both HDMI and Analog outputs allow discrete audio routing from any available NHD-110-TX on the same network.)

Audio Formats

LPCM/MPEG4 AAC stereo, 48KHz

Video Encoding

Primary Stream – H.264/H.265, configurable up to 30Mbps

Video Resolutions (Max)

HDMI: 1920x1080p @60Hz 8bit (15m/50ft)
Cat5e or higher: 1920x1080p @60Hz 8bit (100m/328ft)

End to End Latency

High Quality Mode: ~250msLow Latency Mode: ~80ms

Maximum Pixel Clock

165MHz

COMMUNICATION & CONTROL

HDMI

HDCP 1.4 | EDID | CEC (configurable)

RS-232

1x 3-Pin Phoenix – API controlled from NHD-000-CTL

LAN

1x 8-pin RJ-45 female | 10/100Base-T | PoE 802.1af

1x IR TX: 3.5mm TS Jack Socket
1x IR RX: 3.5mm TS Jack Socket
(IR signals can be bidirectional passthrough or via API commands from NHD-000-CTL for routable IR to discrete TX/RX devices.)

POWER

Power Supply

PoE | 12V 1A DC

Max Power Consumption

6W (DC Adapter)

Additional Features

Supports up to 1080p@60Hz video content
Low bandwidth or high-quality transmission methods. Low latency ~ 80ms. High-quality ~250ms
Interoperable with NHD-100-TX and NHD-140-TX
Analog audio de-embed for easy connection to external audio DSP or amplifier
Image scaling – use mixed resolution displays throughout an installation
Seamless video switching – no black screens or freeze frames
Hugely scalable I/O, utilizing multicast technology
Zero-configuration switch setup using unicast technology
Flexible IP address settings: AutoIP/Static/DHCP
Customizable CEC, IR or RS-232 control of connected devicesCustom “No Source” idle image upload for branded down time
Breakaway, independent routing of all video, audio, IR, USB and RS-232 streams
Infrared signal generation via API – supports Hex Global Cache format
Compatible with NHD-000-RACK4 rack mounting kit (brackets included with decoder)

The post NHD-110-RX-S appeared first on Wave Electronics Systems.

NHD-400-DNT-TX

admin — Tue, 30 May 2023 12:24:05 +0000

The NHD-400-DNT-TX encoder offers stunning 4K HDR video, multichannel audio support and video resolution scaling to seamlessly handle mixed resolution HDMI sources for matrix and video wall functionality. Equipped with a Dante audio encoder the 400 Series embraces the flexibility of standardized audio distribution. Featuring incredible low latency the 400 Series is the ideal AV over IP solution for systems where high quality and low delay are key requirements, making it perfect for demanding commercial applications.

The NHD-400-DNT-TX JPEG 2000 encoder is intended for use with any 400 Series JPEG 2000 decoder (sold separately) to provide a complete end-to-end video distribution system. When used in conjunction with Dante compatible audio equipment the 400 Series can distribute source HDMI or analog audio throughout an installation.

CONNECTIVITY

Inputs

1x HDMI In: 19-pin HDMI Type A Receptacle
1x Audio In: 3.5mm TRS Stereo Jack Socket
1x IR RX: 3.5mm TRS Jack Socket

Outputs

1x LAN (PoE): 8P8C “RJ45” Socket ANSI/TIA-568
1x Audio Out: 3.5mm TRS Stereo Jack Socket
1x USB Host: USB 2.0 Type B Receptacle
1x RS-232: 3-pin Phoenix
1x IR TX: 3.5mm TS Jack Socket

TRANSMISSION

Transmission Encoding

Proprietary stream encoding. Video compression based on JPEG 2000 Dante / AES67 compliant audio stream encoding

End to End Latency

With RX, 1 video frame (Passthrough mode) 2 video frames (scaling/video wall) e.g. 16ms @ 60Hz

Max Transmission Bit Rate

850Mb/s

VIDEO

HDMI

300MHz Max. TMDS Clock

Maximum Data Rate

8.91Gb/s HDMI

Video Resolutions (Max)

1280x720p @60Hz 12bit 4:4:4/RGB
1920x1080p @60Hz 12bit 4:4:4/RGB
3840x2160p @30Hz 12bit 4:2:2/4:2:0 HDR10 HLG
3840x2160p @30Hz 8bit 4:4:4/RGB
3840x2160p @60Hz 8bit 4:2:0

Passthrough mode: Output at RX matches input at TX except for:1) YUV 4:2:0 converted to 8bit RGB2) For resolutions above 1920×1200 at 50/60Hz framerate is halved
Scaler mode: User-selectable scaled output1) All formats converted to 8bit RGB2) Up to 3840x2160p @30Hz

Supported Standards

HDR10 | HLG | BT.2020 | BT.709 | 3D Video

AUDIO

Audio Formats

PCM up to 8ch | Bitstream audio formats including Dolby Atmos & DTS:X2ch Analog Dante: Up to 2ch PCM (HDMI) | 2ch Analog

CONNECTIVITY

Ethernet

IEEE 802.1ab 1000BASE-T

HDCP

HDCP 2.2 | 1.x

EDID

Programmable EDID | EDID Copy/Import | Custom EDID

RS-232

Programmable RS-232 Commands | Custom Command Generation (RX Only)

Custom Command Generation

Dante

Full compatibility with Audinate control and management software tools for Dante

POWER

Power Over Ethernet

IEEE 802.3af (15.4W at PSE)

External Power Supply

Optional part: PSU-12V-1A

Nominal Power Consumption

Additional Features

Uses security protocols such as SSH, HTTPS and AES to encrypt data and prevent unauthorized access
Stunning visually lossless 4K UHD HDMI video with HDR over 1GbE / IP networks
Ultra-low end-to-end latency – only a single video frame (16ms at 60fps)
Dante encoder for 2ch audio from HDMI or analog – compatible with all Audinate Dante software tools
Analog audio input for HDMI audio embedding
Multi-channel audio including DTS:X & Dolby ATMOS supported over HDMI to decoder
Image scaling with 400 Series decoders – use a mix of display resolutions throughout an installation
Easy network set-up using standard Layer 2 or Layer 3 managed switches
Hugely scalable I/O, utilizing multicast technology
Live video unicast preview streams for use with NetworkHD Touch or a custom control UI
Powerful audio matrix functionality – route audio separately from video to any decoder
CEC One-Touch Play & Standby, IR or RS-232 control of connected devices using 400 Series decoder
400 Series supports up to 16×16 video walls with image scaling, bezel compensation and rotation
400 Series supports custom “No Source” idle image upload for branded down time
Support all SD, HD and UHD video formats – including interlaced content
Infrared signal generation direct from encoder or decoder – supports HEX IR format
Analog audio de-embed output with volume control
Batch firmware update and batch settings functions offers a massive reduction on installation times
Custom EDID management with import/export
HDCP 2.2 Compliant
IEEE 802.3af PoE compliant PD
Compatible with NHD-000-RACK4 rack mounting kit (brackets included with encoder)

The post NHD-400-DNT-TX appeared first on Wave Electronics Systems.

NHD-400-E-RX

admin — Tue, 30 May 2023 12:24:05 +0000

WyreStorm brings stunning 4K HDR video, video resolution scaling, multi-channel audio and audio matrixing to IP with the NetworkHD 400 Series’ NHD-400-E-RX AVoIP decoder. The reduced cost Type E version removes some control ports but retains the 400 Series core features. Used in conjunction with any 400 Series encoder, the NHD-400-E-RX seamlessly handles mixed resolution sources, content and display devices for matrix and video wall functionality up to 16×16 with image rotation and bezel compensation.

Featuring incredibly low latency, the 400 Series is the ideal AV over IP solution for systems where high quality and low latency are key requirements, making it perfect for both residential and commercial applications.

AUDIO AND VIDEO

Inputs

1x 8-pin RJ-45

Outputs

1x HDMI Out 19-pin type A

Audio Formats

2ch LPCM | Multichannel: LPCM and Up to DTS-X and Dolby Atmos

Output Video Encoding

JPEG 2000

Encoding Data Rate

Max: 850Mbps

End to End Latency (Max)

1 video frame latency (pass-through mode) 16ms @60fps 2 video frames latency (scaler/VW mode) 33ms @60fps

Video Resolutions (Max)

3840x2160p @60Hz 8bit 4:2:0

Supported Standards

HDR10 | HLG | BT.2020

Maximum Pixel Clock

300MHz

COMMUNICATION AND CONTROL

HDMI

HDCP 2.2 | CEC

Ethernet

1x LAN (PoE): 8-pin RJ-45 ANSI/TIA-568 8P8C, 1000Base-T, PoE PD (IEEE 802.3af)

RS-232

1x RS-232: 4-pin Phoenix | 2 Way (RX only) | Routed | API Programmable

POWER

Power Supply

12V DC 1A

PoE

IEEE 802.3af (15.4W at PSE)

Max Power Consumption

8W (with PSU)

Additional Features

Uses security protocols such as SSH, HTTPS and AES to encrypt data and prevent unauthorized access
Stunning visually lossless 4K UHD HDMI video with HDR over 1GbE / IP networks
Ultra-low end-to-end latency – only a single video frame (16ms at 60fps)
Multi-channel audio including DTS:X & Dolby ATMOS supported over HDMI
Image scaling – use a mix of 4K & 1080p displays throughout an installation
Easy network set-up using standard Layer 2 or Layer 3 managed switches
Hugely scalable I/O, utilizing multicast technology
Live video unicast preview streams for use with NetworkHD Touch or a custom control UI
Powerful audio matrix functionality – route audio separately from video to any decoder
CEC control or RS-232 control of connected devices
Up to 16×16 video walls with image scaling, bezel compensation and rotation
Custom “No Source” idle image upload for branded down time
Support all SD, HD and UHD video formats – including interlaced content
Batch firmware update and batch settings functions offers a massive reduction on installation times
Custom EDID management with import/export
HDCP 2.2 Compliant
IEEE 802.3af PoE compliant PD
Compatible with NHD-000-RACK4 rack mounting kit (brackets included with decoder)

The post NHD-400-E-RX appeared first on Wave Electronics Systems.

NHD-400-E-TX

admin — Tue, 30 May 2023 12:24:05 +0000

The NHD-400-E-TX encoder offers stunning 4K HDR video, multichannel audio support and 4K/2K scaling to seamlessly handle mixed resolution HDMI sources for matrix and video wall functionality. The reduced cost Type E version removes some control ports but retains the 400 Series core features. Featuring incredible low latency the 400 Series is the ideal AV over IP solution for systems where high quality and low delay are key requirements, making it perfect for demanding commercial applications.

The NHD-400-E-TX JPEG 2000 encoder is intended for use with any 400 Series JPEG 2000 decoder (sold seperately) to provide a complete end-to-end video distribution system. When used in conjunction with the NHD-000-CTL system controller complete control integration is quick and simple.

AUDIO AND VIDEO

Inputs

1x 19-pin HDMI Type A

Outputs

1x 8-pin RJ-45

Audio Formats

2ch LPCM | Multichannel: LPCM and Up to DTS-X and Dolby Atmos

Output Video Encoding

JPEG 2000

Encoding Data Rate

Max: 850Mbps

End to End Latency (Max)

1 video frame latency (pass-through mode) 16ms @60fps 2 video frames latency (scaler/VW mode) 33ms @60fps

Video Resolutions (Max)

3840x2160p @60Hz 8bit 4:2:0

Supported Standards

HDR10 | HLG | BT.2020

Maximum Pixel Clock

300MHz

COMMUNICATION AND CONTROL

HDMI

HDCP 2.2 | CEC

Ethernet

1x LAN (PoE): 8-pin RJ-45 ANSI/TIA-568 8P8C, 1000Base-T, PoE PD (IEEE 802.3af)

RS-232

1x RS-232: 4-pin Phoenix | 2 Way (RX only) | Routed | API Programmable

POWER

Power Supply

12V DC 1A

PoE

IEEE 802.3af (15.4W at PSE)

Max Power Consumption

8W (with PSU)

Additional Features

Uses security protocols such as SSH, HTTPS and AES to encrypt data and prevent unauthorized access
Stunning visually lossless 4K UHD HDMI video with HDR over 1GbE / IP networks
Ultra-low end-to-end latency – only a single video frame (16ms at 60fps)
Multi-channel audio including DTS:X & Dolby ATMOS supported over HDMI
Image scaling with 400 Series decoders – use a mix of 4K & 1080p displays throughout an installation
Easy network set-up using standard Layer 2 or Layer 3 managed switches
Hugely scalable I/O, utilizing multicast technology
Live video unicast preview streams for use with NetworkHD Touch or a custom control UI
Powerful audio matrix functionality – route audio separately from video to any decoder
400 Series supports up to 16×16 video walls with image scaling, bezel compensation and rotation
400 Series supports custom “No Source” idle image upload for branded down time
Support all SD, HD and UHD video formats – including interlaced content
Batch firmware update and batch settings functions offers a massive reduction on installation times
Custom EDID management with import/export
HDCP 2.2 Compliant
IEEE 802.3af PoE compliant PD
Compatible with NHD-000-RACK4 rack mounting kit (brackets included with encoder)

The post NHD-400-E-TX appeared first on Wave Electronics Systems.

NHD-400-RX

admin — Tue, 30 May 2023 12:24:05 +0000

WyreStorm brings stunning 4K HDR video, 4K/2K auto-scaling, multi-channel audio and audio matrixing to IP with the NetworkHD 400 Series’ NHD-400-RX AVoIP decoder. Used in conjunction with a 400 Series encoder, the NHD-400-RX seamlessly handles mixed resolution sources, content and display devices for matrix and video wall functionality up to 16×16 with image rotation and bezel compensation.

AUDIO AND VIDEO

Inputs

1x 8-pin RJ-45 female (Transmission from TX)

Outputs

1x HDMI Out 19-pin type A
1x Audio Out: 5-Pin Phoenix

Audio Formats

2ch PCM | Multichannel: LPCM and Up to DTS-X and Dolby Atmos

Output Video Encoding

JPEG 2000

Encoding Data Rate

Max: 850Mbps

End to End Latency (Max)

1 video frame latency (pass-through mode) 16ms @60fps 2 video frames latency (scaler/VW mode) 33ms @60fps

Video Resolutions (Max)

1920x1080p @60Hz 12bit 4:4:4/RGB
3840x2160p @30Hz 12bit 4:2:2 HDR10 HLG
3840x2160p @30Hz 8bit 4:4:4/RGB
3840x2160p @60Hz 8bit 4:2:0

Supported Standards

HDR10 | HLG | BT.2020 | BT.709 | 3D Video

Maximum Pixel Clock

300MHz

COMMUNICATION AND CONTROL

HDMI

HDCP 2.2 | CEC

Ethernet

1x LAN (PoE): 8-pin RJ-45 ANSI/TIA-568 8P8C, 1000Base-T, PoE PD (IEEE 802.3af)

USB

2x USB Device: USB Type A | Power: 5v 500ma per port | Data Rate: Max 9MB/s

1x IR TX: 3.5mm (1/8in) TS Mono | 1x IR RX: 3.5mm (1/8in) TRS Stereo | Bidirectional Over Ethernet

RS-232

1x RS-232: 4-pin Phoenix | 2 Way (RX only)

POWER

Power Supply

12V DC 1A

PoE

IEEE 802.3af (15.4W at PSE)

Max Power Consumption

8W (with PSU)

Additional Features

Uses security protocols such as SSH, HTTPS and AES to encrypt data and prevent unauthorized access
Stunning visually lossless 4K UHD video with HDR over 1GbE / IP networks
Ultra-low end-to-end latency – only a single video frame (16ms at 60fps)
Multi-channel audio including DTS:X & Dolby ATMOS
Image scaling – use a mix of 4K & 1080p displays throughout an installation
Easy network set-up using standard Layer 2 or Layer 3 managed switches
Hugely scalable I/O, utilizing multicast technology
Live video unicast preview streams for use with NetworkHD Touch or a custom control UI
Powerful audio matrix functionality – route audio separately from video to any decoder
CEC One-Touch Play & Standby, bidirectional IR or RS-232 control of connected devices
Up to 16×16 video walls with image scaling, bezel compensation and rotation
Custom “No Source” idle image upload for branded down time
Support all SD, HD and UHD video formats – including interlaced content
Breakaway, independent routing of all video, audio, IR, USB and RS-232 streams
Infrared signal generation direct from an encoder or decoder – supports Hex IR format
Arbitrary CEC command generation – complete display control over the HDMI cable
Analog audio de-embed output with volume control
Batch firmware update and batch settings functions offers a massive reduction on installation times
Custom EDID management with import/export
HDCP 2.2 compliant
IEEE 802.3af PoE compliant PD
Includes optional DC power adapter and mounting brackets
Compatible with NHD-000-RACK4 rack mounting kit (brackets included with decoder)

The post NHD-400-RX appeared first on Wave Electronics Systems.

NHD-400-TX

admin — Tue, 30 May 2023 12:24:05 +0000

As part of the WyreStorm NetworkHD 400 Series, the NHD-400-TX streaming encoder offers stunning 4K HDR video, multi-channel audio support and 4K/2K auto-scaling to seamlessly handle mixed resolution sources, content and display devices for matrix and video wall functionality when used in conjunction with a 400 Series decoder.

Inputs

1x HDMI

Outputs

1x HDMI (Loop Out)
1x Audio Out: 3.5mm (1/8in) TRS Stereo
1x 8-pin RJ-45 (Transmission to RX)

Audio Formats

2ch PCM | Multichannel: LPCM and Up to DTS-X and Dolby Atmos

Output Video Encoding

JPEG 2000

Encoding Data Rate

Max: 850Mbps

End to End Latency (Max)

1 video frame latency (pass-through mode) 16ms @60fps 2 video frames latency (scaler/VW mode) 33ms @60fps

Video Resolutions (Max)

1920x1080p @60Hz 12bit 4:4:4/RGB
3840x2160p @30Hz 12bit 4:2:2 HDR10 HLG
3840x2160p @30Hz 8bit 4:4:4/RGB
3840x2160p @60Hz 8bit 4:2:0

Supported Standards

HDR10 | HLG | BT.2020 | BT.709 | 3D Video

Maximum Pixel Clock

300MHz

COMMUNICATION AND CONTROL

HDMI

HDCP 2.2 | CEC

Ethernet

1x 1GbE 8-pin RJ-45

USB

1x USB Host: USB Type B | Power: 5v 500ma per port | Data Rate: Max 9MB/s

1x IR TX: 3.5mm (1/8in) TS Mono Jack | 1x IR RX: 3.5mm (1/8in) TRS Stereo Jack | Bidirectional Over Ethernet

RS-232

1x RS-232: 4-pin Phoenix | 2 Way (RX only)

POWER

Power Supply

12V DC 1A

PoE

IEEE 802.3af (15.4W at PSE)

Max Power Consumption

8W (with PSU)

Additional Features

Uses security protocols such as SSH, HTTPS and AES to encrypt data and prevent unauthorized access
Stunning visually lossless 4K UHD video with HDR over 1GbE / IP networks
Ultra-low end-to-end latency – only a single video frame (16ms at 60fps)
Multi-channel audio including DTS:X & Dolby ATMOS
Image scaling – use a mix of 4K & 1080p displays throughout an installation
Easy network set-up using standard Layer 2 or Layer 3 managed switches
Hugely scalable I/O, utilizing multicast technology
Live video unicast preview streams for use with NetworkHD Touch or a custom control UI
Powerful audio matrix functionality – route audio separately from video to any decoder
CEC One-Touch Play & Standby, bidirectional IR or RS-232 control of connected devices
Up to 16×16 video walls with image scaling, bezel compensation and rotation
Custom “No Source” idle image upload for branded down time
Support all SD, HD and UHD video formats – including interlaced content
Breakaway, independent routing of all video, audio, IR, USB and RS-232 streams
Infrared signal generation direct from an encoder or decoder – supports Hex IR format
Analog audio de-embed output with volume control
Batch firmware update and batch settings functions offers a massive reduction on installation times
Custom EDID management with import/export
HDCP 2.2 Compliant
IEEE 802.3af PoE compliant PD
Includes optional DC power adapter and mounting brackets
Compatible with NHD-000-RACK4 rack mounting kit (brackets included with encoder)

The post NHD-400-TX appeared first on Wave Electronics Systems.