Wyrestorm » AV Over IP » NetworkHD 400 Series » Wave Electronics Systems

NHD-400-E-RX

admin — Tue, 30 May 2023 12:24:05 +0000

WyreStorm brings stunning 4K HDR video, video resolution scaling, multi-channel audio and audio matrixing to IP with the NetworkHD 400 Series’ NHD-400-E-RX AVoIP decoder. The reduced cost Type E version removes some control ports but retains the 400 Series core features. Used in conjunction with any 400 Series encoder, the NHD-400-E-RX seamlessly handles mixed resolution sources, content and display devices for matrix and video wall functionality up to 16×16 with image rotation and bezel compensation.

Featuring incredibly low latency, the 400 Series is the ideal AV over IP solution for systems where high quality and low latency are key requirements, making it perfect for both residential and commercial applications.

AUDIO AND VIDEO

Inputs

1x 8-pin RJ-45

Outputs

1x HDMI Out 19-pin type A

Audio Formats

2ch LPCM | Multichannel: LPCM and Up to DTS-X and Dolby Atmos

Output Video Encoding

JPEG 2000

Encoding Data Rate

Max: 850Mbps

End to End Latency (Max)

1 video frame latency (pass-through mode) 16ms @60fps 2 video frames latency (scaler/VW mode) 33ms @60fps

Video Resolutions (Max)

3840x2160p @60Hz 8bit 4:2:0

Supported Standards

HDR10 | HLG | BT.2020

Maximum Pixel Clock

300MHz

COMMUNICATION AND CONTROL

HDMI

HDCP 2.2 | CEC

Ethernet

1x LAN (PoE): 8-pin RJ-45 ANSI/TIA-568 8P8C, 1000Base-T, PoE PD (IEEE 802.3af)

RS-232

1x RS-232: 4-pin Phoenix | 2 Way (RX only) | Routed | API Programmable

POWER

Power Supply

12V DC 1A

PoE

IEEE 802.3af (15.4W at PSE)

Max Power Consumption

8W (with PSU)

Additional Features

Uses security protocols such as SSH, HTTPS and AES to encrypt data and prevent unauthorized access
Stunning visually lossless 4K UHD HDMI video with HDR over 1GbE / IP networks
Ultra-low end-to-end latency – only a single video frame (16ms at 60fps)
Multi-channel audio including DTS:X & Dolby ATMOS supported over HDMI
Image scaling – use a mix of 4K & 1080p displays throughout an installation
Easy network set-up using standard Layer 2 or Layer 3 managed switches
Hugely scalable I/O, utilizing multicast technology
Live video unicast preview streams for use with NetworkHD Touch or a custom control UI
Powerful audio matrix functionality – route audio separately from video to any decoder
CEC control or RS-232 control of connected devices
Up to 16×16 video walls with image scaling, bezel compensation and rotation
Custom “No Source” idle image upload for branded down time
Support all SD, HD and UHD video formats – including interlaced content
Batch firmware update and batch settings functions offers a massive reduction on installation times
Custom EDID management with import/export
HDCP 2.2 Compliant
IEEE 802.3af PoE compliant PD
Compatible with NHD-000-RACK4 rack mounting kit (brackets included with decoder)

The post NHD-400-E-RX appeared first on Wave Electronics Systems.

NHD-400-E-TX

admin — Tue, 30 May 2023 12:24:05 +0000

The NHD-400-E-TX encoder offers stunning 4K HDR video, multichannel audio support and 4K/2K scaling to seamlessly handle mixed resolution HDMI sources for matrix and video wall functionality. The reduced cost Type E version removes some control ports but retains the 400 Series core features. Featuring incredible low latency the 400 Series is the ideal AV over IP solution for systems where high quality and low delay are key requirements, making it perfect for demanding commercial applications.

The NHD-400-E-TX JPEG 2000 encoder is intended for use with any 400 Series JPEG 2000 decoder (sold seperately) to provide a complete end-to-end video distribution system. When used in conjunction with the NHD-000-CTL system controller complete control integration is quick and simple.

AUDIO AND VIDEO

Inputs

1x 19-pin HDMI Type A

Outputs

1x 8-pin RJ-45

Audio Formats

2ch LPCM | Multichannel: LPCM and Up to DTS-X and Dolby Atmos

Output Video Encoding

JPEG 2000

Encoding Data Rate

Max: 850Mbps

End to End Latency (Max)

1 video frame latency (pass-through mode) 16ms @60fps 2 video frames latency (scaler/VW mode) 33ms @60fps

Video Resolutions (Max)

3840x2160p @60Hz 8bit 4:2:0

Supported Standards

HDR10 | HLG | BT.2020

Maximum Pixel Clock

300MHz

COMMUNICATION AND CONTROL

HDMI

HDCP 2.2 | CEC

Ethernet

1x LAN (PoE): 8-pin RJ-45 ANSI/TIA-568 8P8C, 1000Base-T, PoE PD (IEEE 802.3af)

RS-232

1x RS-232: 4-pin Phoenix | 2 Way (RX only) | Routed | API Programmable

POWER

Power Supply

12V DC 1A

PoE

IEEE 802.3af (15.4W at PSE)

Max Power Consumption

8W (with PSU)

Additional Features

Uses security protocols such as SSH, HTTPS and AES to encrypt data and prevent unauthorized access
Stunning visually lossless 4K UHD HDMI video with HDR over 1GbE / IP networks
Ultra-low end-to-end latency – only a single video frame (16ms at 60fps)
Multi-channel audio including DTS:X & Dolby ATMOS supported over HDMI
Image scaling with 400 Series decoders – use a mix of 4K & 1080p displays throughout an installation
Easy network set-up using standard Layer 2 or Layer 3 managed switches
Hugely scalable I/O, utilizing multicast technology
Live video unicast preview streams for use with NetworkHD Touch or a custom control UI
Powerful audio matrix functionality – route audio separately from video to any decoder
400 Series supports up to 16×16 video walls with image scaling, bezel compensation and rotation
400 Series supports custom “No Source” idle image upload for branded down time
Support all SD, HD and UHD video formats – including interlaced content
Batch firmware update and batch settings functions offers a massive reduction on installation times
Custom EDID management with import/export
HDCP 2.2 Compliant
IEEE 802.3af PoE compliant PD
Compatible with NHD-000-RACK4 rack mounting kit (brackets included with encoder)

The post NHD-400-E-TX appeared first on Wave Electronics Systems.

NHD-400-RX

admin — Tue, 30 May 2023 12:24:05 +0000

WyreStorm brings stunning 4K HDR video, 4K/2K auto-scaling, multi-channel audio and audio matrixing to IP with the NetworkHD 400 Series’ NHD-400-RX AVoIP decoder. Used in conjunction with a 400 Series encoder, the NHD-400-RX seamlessly handles mixed resolution sources, content and display devices for matrix and video wall functionality up to 16×16 with image rotation and bezel compensation.

AUDIO AND VIDEO

Inputs

1x 8-pin RJ-45 female (Transmission from TX)

Outputs

1x HDMI Out 19-pin type A
1x Audio Out: 5-Pin Phoenix

Audio Formats

2ch PCM | Multichannel: LPCM and Up to DTS-X and Dolby Atmos

Output Video Encoding

JPEG 2000

Encoding Data Rate

Max: 850Mbps

End to End Latency (Max)

1 video frame latency (pass-through mode) 16ms @60fps 2 video frames latency (scaler/VW mode) 33ms @60fps

Video Resolutions (Max)

1920x1080p @60Hz 12bit 4:4:4/RGB
3840x2160p @30Hz 12bit 4:2:2 HDR10 HLG
3840x2160p @30Hz 8bit 4:4:4/RGB
3840x2160p @60Hz 8bit 4:2:0

Supported Standards

HDR10 | HLG | BT.2020 | BT.709 | 3D Video

Maximum Pixel Clock

300MHz

COMMUNICATION AND CONTROL

HDMI

HDCP 2.2 | CEC

Ethernet

1x LAN (PoE): 8-pin RJ-45 ANSI/TIA-568 8P8C, 1000Base-T, PoE PD (IEEE 802.3af)

USB

2x USB Device: USB Type A | Power: 5v 500ma per port | Data Rate: Max 9MB/s

1x IR TX: 3.5mm (1/8in) TS Mono | 1x IR RX: 3.5mm (1/8in) TRS Stereo | Bidirectional Over Ethernet

RS-232

1x RS-232: 4-pin Phoenix | 2 Way (RX only)

POWER

Power Supply

12V DC 1A

PoE

IEEE 802.3af (15.4W at PSE)

Max Power Consumption

8W (with PSU)

Additional Features

Uses security protocols such as SSH, HTTPS and AES to encrypt data and prevent unauthorized access
Stunning visually lossless 4K UHD video with HDR over 1GbE / IP networks
Ultra-low end-to-end latency – only a single video frame (16ms at 60fps)
Multi-channel audio including DTS:X & Dolby ATMOS
Image scaling – use a mix of 4K & 1080p displays throughout an installation
Easy network set-up using standard Layer 2 or Layer 3 managed switches
Hugely scalable I/O, utilizing multicast technology
Live video unicast preview streams for use with NetworkHD Touch or a custom control UI
Powerful audio matrix functionality – route audio separately from video to any decoder
CEC One-Touch Play & Standby, bidirectional IR or RS-232 control of connected devices
Up to 16×16 video walls with image scaling, bezel compensation and rotation
Custom “No Source” idle image upload for branded down time
Support all SD, HD and UHD video formats – including interlaced content
Breakaway, independent routing of all video, audio, IR, USB and RS-232 streams
Infrared signal generation direct from an encoder or decoder – supports Hex IR format
Arbitrary CEC command generation – complete display control over the HDMI cable
Analog audio de-embed output with volume control
Batch firmware update and batch settings functions offers a massive reduction on installation times
Custom EDID management with import/export
HDCP 2.2 compliant
IEEE 802.3af PoE compliant PD
Includes optional DC power adapter and mounting brackets
Compatible with NHD-000-RACK4 rack mounting kit (brackets included with decoder)

The post NHD-400-RX appeared first on Wave Electronics Systems.

NHD-400-TX

admin — Tue, 30 May 2023 12:24:05 +0000

As part of the WyreStorm NetworkHD 400 Series, the NHD-400-TX streaming encoder offers stunning 4K HDR video, multi-channel audio support and 4K/2K auto-scaling to seamlessly handle mixed resolution sources, content and display devices for matrix and video wall functionality when used in conjunction with a 400 Series decoder.

Inputs

1x HDMI

Outputs

1x HDMI (Loop Out)
1x Audio Out: 3.5mm (1/8in) TRS Stereo
1x 8-pin RJ-45 (Transmission to RX)

Audio Formats

2ch PCM | Multichannel: LPCM and Up to DTS-X and Dolby Atmos

Output Video Encoding

JPEG 2000

Encoding Data Rate

Max: 850Mbps

End to End Latency (Max)

1 video frame latency (pass-through mode) 16ms @60fps 2 video frames latency (scaler/VW mode) 33ms @60fps

Video Resolutions (Max)

1920x1080p @60Hz 12bit 4:4:4/RGB
3840x2160p @30Hz 12bit 4:2:2 HDR10 HLG
3840x2160p @30Hz 8bit 4:4:4/RGB
3840x2160p @60Hz 8bit 4:2:0

Supported Standards

HDR10 | HLG | BT.2020 | BT.709 | 3D Video

Maximum Pixel Clock

300MHz

COMMUNICATION AND CONTROL

HDMI

HDCP 2.2 | CEC

Ethernet

1x 1GbE 8-pin RJ-45

USB

1x USB Host: USB Type B | Power: 5v 500ma per port | Data Rate: Max 9MB/s

1x IR TX: 3.5mm (1/8in) TS Mono Jack | 1x IR RX: 3.5mm (1/8in) TRS Stereo Jack | Bidirectional Over Ethernet

RS-232

1x RS-232: 4-pin Phoenix | 2 Way (RX only)

POWER

Power Supply

12V DC 1A

PoE

IEEE 802.3af (15.4W at PSE)

Max Power Consumption

8W (with PSU)

Additional Features

Uses security protocols such as SSH, HTTPS and AES to encrypt data and prevent unauthorized access
Stunning visually lossless 4K UHD video with HDR over 1GbE / IP networks
Ultra-low end-to-end latency – only a single video frame (16ms at 60fps)
Multi-channel audio including DTS:X & Dolby ATMOS
Image scaling – use a mix of 4K & 1080p displays throughout an installation
Easy network set-up using standard Layer 2 or Layer 3 managed switches
Hugely scalable I/O, utilizing multicast technology
Live video unicast preview streams for use with NetworkHD Touch or a custom control UI
Powerful audio matrix functionality – route audio separately from video to any decoder
CEC One-Touch Play & Standby, bidirectional IR or RS-232 control of connected devices
Up to 16×16 video walls with image scaling, bezel compensation and rotation
Custom “No Source” idle image upload for branded down time
Support all SD, HD and UHD video formats – including interlaced content
Breakaway, independent routing of all video, audio, IR, USB and RS-232 streams
Infrared signal generation direct from an encoder or decoder – supports Hex IR format
Analog audio de-embed output with volume control
Batch firmware update and batch settings functions offers a massive reduction on installation times
Custom EDID management with import/export
HDCP 2.2 Compliant
IEEE 802.3af PoE compliant PD
Includes optional DC power adapter and mounting brackets
Compatible with NHD-000-RACK4 rack mounting kit (brackets included with encoder)

The post NHD-400-TX appeared first on Wave Electronics Systems.

NHD-400-DNT-TX

admin — Tue, 30 May 2023 12:24:05 +0000

The NHD-400-DNT-TX encoder offers stunning 4K HDR video, multichannel audio support and video resolution scaling to seamlessly handle mixed resolution HDMI sources for matrix and video wall functionality. Equipped with a Dante audio encoder the 400 Series embraces the flexibility of standardized audio distribution. Featuring incredible low latency the 400 Series is the ideal AV over IP solution for systems where high quality and low delay are key requirements, making it perfect for demanding commercial applications.

The NHD-400-DNT-TX JPEG 2000 encoder is intended for use with any 400 Series JPEG 2000 decoder (sold separately) to provide a complete end-to-end video distribution system. When used in conjunction with Dante compatible audio equipment the 400 Series can distribute source HDMI or analog audio throughout an installation.

CONNECTIVITY

Inputs

1x HDMI In: 19-pin HDMI Type A Receptacle
1x Audio In: 3.5mm TRS Stereo Jack Socket
1x IR RX: 3.5mm TRS Jack Socket

Outputs

1x LAN (PoE): 8P8C “RJ45” Socket ANSI/TIA-568
1x Audio Out: 3.5mm TRS Stereo Jack Socket
1x USB Host: USB 2.0 Type B Receptacle
1x RS-232: 3-pin Phoenix
1x IR TX: 3.5mm TS Jack Socket

TRANSMISSION

Transmission Encoding

Proprietary stream encoding. Video compression based on JPEG 2000 Dante / AES67 compliant audio stream encoding

End to End Latency

With RX, 1 video frame (Passthrough mode) 2 video frames (scaling/video wall) e.g. 16ms @ 60Hz

Max Transmission Bit Rate

850Mb/s

VIDEO

HDMI

300MHz Max. TMDS Clock

Maximum Data Rate

8.91Gb/s HDMI

Video Resolutions (Max)

1280x720p @60Hz 12bit 4:4:4/RGB
1920x1080p @60Hz 12bit 4:4:4/RGB
3840x2160p @30Hz 12bit 4:2:2/4:2:0 HDR10 HLG
3840x2160p @30Hz 8bit 4:4:4/RGB
3840x2160p @60Hz 8bit 4:2:0

Passthrough mode: Output at RX matches input at TX except for:1) YUV 4:2:0 converted to 8bit RGB2) For resolutions above 1920×1200 at 50/60Hz framerate is halved
Scaler mode: User-selectable scaled output1) All formats converted to 8bit RGB2) Up to 3840x2160p @30Hz

Supported Standards

HDR10 | HLG | BT.2020 | BT.709 | 3D Video

AUDIO

Audio Formats

PCM up to 8ch | Bitstream audio formats including Dolby Atmos & DTS:X2ch Analog Dante: Up to 2ch PCM (HDMI) | 2ch Analog

CONNECTIVITY

Ethernet

IEEE 802.1ab 1000BASE-T

HDCP

HDCP 2.2 | 1.x

EDID

Programmable EDID | EDID Copy/Import | Custom EDID

RS-232

Programmable RS-232 Commands | Custom Command Generation (RX Only)

Custom Command Generation

Dante

Full compatibility with Audinate control and management software tools for Dante

POWER

Power Over Ethernet

IEEE 802.3af (15.4W at PSE)

External Power Supply

Optional part: PSU-12V-1A

Nominal Power Consumption

Additional Features

Uses security protocols such as SSH, HTTPS and AES to encrypt data and prevent unauthorized access
Stunning visually lossless 4K UHD HDMI video with HDR over 1GbE / IP networks
Ultra-low end-to-end latency – only a single video frame (16ms at 60fps)
Dante encoder for 2ch audio from HDMI or analog – compatible with all Audinate Dante software tools
Analog audio input for HDMI audio embedding
Multi-channel audio including DTS:X & Dolby ATMOS supported over HDMI to decoder
Image scaling with 400 Series decoders – use a mix of display resolutions throughout an installation
Easy network set-up using standard Layer 2 or Layer 3 managed switches
Hugely scalable I/O, utilizing multicast technology
Live video unicast preview streams for use with NetworkHD Touch or a custom control UI
Powerful audio matrix functionality – route audio separately from video to any decoder
CEC One-Touch Play & Standby, IR or RS-232 control of connected devices using 400 Series decoder
400 Series supports up to 16×16 video walls with image scaling, bezel compensation and rotation
400 Series supports custom “No Source” idle image upload for branded down time
Support all SD, HD and UHD video formats – including interlaced content
Infrared signal generation direct from encoder or decoder – supports HEX IR format
Analog audio de-embed output with volume control
Batch firmware update and batch settings functions offers a massive reduction on installation times
Custom EDID management with import/export
HDCP 2.2 Compliant
IEEE 802.3af PoE compliant PD
Compatible with NHD-000-RACK4 rack mounting kit (brackets included with encoder)

The post NHD-400-DNT-TX appeared first on Wave Electronics Systems.