Wyrestorm » AV Over IP » NetworkHD 500 Series » Wave Electronics Systems

NHD-500-IW-TX

admin — Tue, 30 May 2023 12:09:35 +0000

The NHD-500-IW-TX brings versatility to your AV over IP applications. This 2-gang in-wall 500 series encoder features HDMI and USB-C switching inputs suited for connecting today’s modern laptops and tablets. Perfect for education or corporate environments, install this encoder in a wall, table, desk, podium or anywhere a remote input is needed. Integrated USB extension allows laptops to also connect to peripheral components such as conference cameras, smartboards/touchscreens and more.

AUDIO & VIDEO

Inputs/Outputs

1x HDMI In
1x USB-C In
1x 3.5mm TRS Analog In

Output Video Encoding

JPEG 2000

Encoding Data Rate

Max: 850Mbps (configurable)

End to End Latency

1 video frame latency (pass-through mode) 16ms @ 4K60 | 2 video frames latency (scaler/VW mode)

Video Resolution (Max)

4096x2160p @ 60Hz 8bit 4:4:4 or RGB
3840x2160p @ 60Hz 12bit 4:2:2 Dolby Vision
3840x 2160p @ 60Hz 10bit 4:2:2 HDR10/HLG
1920x1080p @60Hz 12bit

Supported Standards

RGB | DCI | USB 1.1, 2.0 | BT.2020

Maximum Pixel Clock

600MHz

COMMUNICATION & CONTROL

HDMI

HDMI 2.0b | HDCP 2.2 | EDID

RS-232

1x 3.5mm | 2-way | API Programmable

Network

1x 1GbE RJ45

USB

1x USB-C Host
(Up to 300Mbps upstream)

Security Protocols

AES 128 | SSH | TLS | HTTPS

POWER

Power Supply

12V DC 1A | 802.3af PoE Compliant

Max Power Consumption

Max 15.4 | Average: 8w

Additional Features

Supports encoding full 4K60 4:4:4 8bit or RGB content
Dedicated stereo input for connecting external audio devices
Auto or manual switching inputs
Hugely scalable I/O utilizing multicast technology
Bidirectional RS-232 control of connected devices
Batch firmware update and batch settings functions offers a massive reduction on installation times

The post NHD-500-IW-TX appeared first on Wave Electronics Systems.

NHD-500-E

admin — Tue, 30 May 2023 12:09:35 +0000

The NHD-500-E encoder and decoder enhance the NetworkHD 500 series by providing an economical 4K60 solution. The “E” variations remove many of the I/O found on the standard encoder and decoder and retain only the core functionalities that suite most applications. This helps avoid an over-specified hardware solution while still offering interoperability between all other 500 series components, enabling system designs to be better tailored to exact needs.

AUDIO & VIDEO

Inputs/Outputs

TX:
1x HDMI 2.0b Input
1x 5-Pin Balanced Audio Output

RX:
1x HDMI 2.0b Output

Video Resolution (Max)

4096x2160p @ 60Hz 8bit 4:4:4 or RGB
3840x2160p @ 60Hz 12bit 4:2:2 Dolby Vision
3840x 2160p @ 60Hz 10bit 4:2:2 HDR10/HLG
1920x1080p @60Hz 12bit

Audio Formats

HDMI passthrough: up to Dolby Atmos & DTS:X
ARC: up to Dolby Digital Plus 5.1 or DTS 5.1

Supported Standards

RGB | DCI | BT.2020

Maximum Pixel Clock

600Mhz

Output Video Encoding

JPEG 2000

Encoding Data Rate

Max 850Mbps (configurable)

End-to-End Latency

1 video frame latency (pass-through mode) 16ms @ 4K60 | 2 video frames latency (scaler/VW mode)

COMMUNICATION & CONTROL

HDMI

HDMI 2.0b | HDCP 2.2 | CEC | EDID | ARC

LAN

1x 1GbE 8-Pin RJ45

1x 3.5mm TX | API Programmable (TX only)

RS-232

1x 3-Pin Phoenix Connector | 2-way | API Programmable (RX only)

Security Protocols

AES 128 | SSH | TLS | HTTPS

POWER

Power Supply

12V DC 1A | 802.3af PoE Compliant

Additional Features

Balanced audio de-embed on encoder provides convenient distribution of audio to external systems
Less than a single frame a latency (16ms) when in passthrough mode allows content to be distributed without any perceivable delay.
Routable serial on decoder allows control of peripheral equipment such as displays or projectors
JPEG 2000 compression delivers visually lossless video transmissions
Intuitive management and configuration via the NHD-CTL-PRO
Compatible with the NHD-0401-MV multiview processor

The post NHD-500-E appeared first on Wave Electronics Systems.

NHD-500

admin — Tue, 30 May 2023 12:09:35 +0000

The NetworkHD 500s series is an HDMI 2.0 AV over IP solution. Capable of encoding up to 4K60 including Dolby Vision, HDR10 and HLG content. The 500 series comes loaded with a number of advanced features such as the flexibility of Ethernet or Fiber as a transport method. Ultra-low latency encoding and incredibly fast matrix switching speeds enhance the experience. A powerful routing engine allows audio, video, USB and control signals to be discretely sent to any endpoint. Create captivating video walls up to 16×16 in size and control them with the tap of a button in the amazing NetworkHD Touch control app.

AUDIO & VIDEO

Inputs

TX:
1 x HDMI 2.0b
1 x 3.5mm TRS Audio

RX:
1 x S/PDIF (Toslink)

Outputs

TX:
1 x 5-pin Balanced Audio
1 x S/PDIF Digital

RX:
1 x HDMI 2.0b
1 x 5-Pin Balanced Audio

Video Resolution (Max)

4096x2160p @ 60Hz 8bit 4:4:4 or RGB
3840x2160p @ 60Hz 12bit 4:2:2 Dolby Vision/HDR/HLG
1920x1080p @60Hz 12bit

Audio Formats

Passthrough: 2ch PCM and up to DTS:X and Dolby Atmos
ARC: 2ch PCM and up to Dolby Digital+ and DTS 5.1

Supported Standards

DCI | RGB | USB

Maximum Pixel Clock

600Mhz

Output Video Encoding

JPEG 2000

Encoding Data Rate

Max 850Mbps

End-to-End Latency

1 video frame latency (pass-through mode) 16ms @ 4K60 | 2 video frames latency (scaler/VW mode)

COMMUNICATION & CONTROL

HDMI

HDMI 2.0 | HDCP 2.2 | CEC | EDID | ARC

LAN

1x 1GbE 8-Pin RJ45
1x 1Gb SFP:
(1000Base-SX: 550m using OM3 MMF)
(1000Base-LX: 5km using SMF)
(1000Base-LX10: 10km using SMF)

1x IR TX 3.5mm TS Mono Jack | API Programmable
1x IR RX 3.5mm TRS Stereo Jack | API Programmable

RS-232

1x 3-Pin Phoenix Connector | 2-way | API Programmable

Communication Protocols

Telnet | TLS | SSH | HTTP | HTTPS

USB

TX:
1 x USB 2.0 Type Host

RX:
2 x USB HID Type A
1 x USB 2.0 Type A (up to 300Mbps upstream)

POWER

Power Supply

12V DC 1A | 802.3af PoE Compliant

The post NHD-500 appeared first on Wave Electronics Systems.

NHD-0401-MV

admin — Tue, 30 May 2023 12:09:35 +0000

The NHD-0401-MV is a powerful multiview switcher that can be used as a standalone solution or with a NetworkHD 400 or 500 series system. The switcher comes pre-loaded with five different multiview layouts offering unique viewing experiences. 4K60 HDMI 2.0 inputs allow the switcher to support all the latest 4K HDR content with zero compression. Direct integration with the NHD-CTL-PRO provides a seamless solution for pairing this switcher with NetworkHD encoders & decoders to add multiview capability to an AV over IP project.

Audio and Video

Inputs/Outputs

4x HDMI In
1x HDMI Out
1x 3.5mm TRS Analog Out

Maximum Pixel Clock

600Mhz

Max Video Resolutions

4096x2160p @ 60Hz 8bit 4:4:4 or RGB
3840x2160p @ 60Hz 12bit 4:2:2 Dolby Vision
3840x 2160p @ 60Hz 10bit 4:2:2 HDR10/HLG
1920x1080p @60Hz 12bit

Supported Standards

RGB | DCI | BT.2020 | Rec.709

Output Video Encoding

Uncompressed HDMI

COMMUNICATION AND CONTROL

HDMI

HDMI 2.0b | HDCP 2.2 | CEC | EDID

Network

1x 1GbE RJ45

RS-232

1x 3-Pin Phoenix Connector (API Control)

1x IR RX 3.5mm TRS Stereo Jack

POWER

Power Supply

12V 2A DC

Power Consumption

18w

Additional Features

Built-in web interface for standalone configurations
Analog audio de-embed for connection to 3^rd-party audio systems
Front panel control buttons for switching inputs and multiview layouts
Compatible with NetworkHD Touch

The post NHD-0401-MV appeared first on Wave Electronics Systems.

NHD-500-DNT-TX

admin — Tue, 30 May 2023 12:09:35 +0000

The NHD-500-DNT-TX is part of the powerful NetworkHD 500 series family of products. Capable of encoding up to 4K60 including Dolby Vision, HDR10 and HLG content. The 500 series comes loaded with a number of advanced features such as the flexibility of Ethernet or Fiber as a transport method. Ultra-low latency encoding and incredibly fast matrix switching speeds enhance the experience. Unique to this encoder is an integrated 2 channel Dante & AES67 audio output.

Audio and Video

Inputs/Outputs

1x HDMI In
1x 3.5mm TRS Analog In
1x 5-pin Balanced Analog Out
1x Toslink Digital Out

Maximum Pixel Clock

600Mhz

Max Video Resolutions

4096x2160p @ 60Hz 8bit 4:4:4 or RGB
3840x2160p @ 60Hz 12bit 4:2:2 Dolby Vision
3840x 2160p @ 60Hz 10bit 4:2:2 HDR10/HLG
1920x1080p @60Hz 12bit

Supported Standards

RGB | BT.2020 | BT.709 | DCI | HDR10 | HDR10+ | HLG | Dolby Vision

Audio Formats

Passthrough: 2CH PCM up to DTS:X & Dolby Atmos
ARC: 2CH PCM up to Dolby Digital Plus & DTS 5.1
Dante/AES67: 2CH PCM

Output Video Encoding

JPEG 2000

Encoding Data Rate

Max: 850Mbps (configurable)

End to End Latency

1 video frame latency (pass-through mode) 16ms @ 4K60 | 2 video frames latency (scaler/VW mode)

COMMUNICATION AND CONTROL

HDMI

HDMI 2.0b | HDCP 2.2 | CEC | ARC | EDID

Network

2x 1GbE RJ45 (Dante & main AV out)
1 x 1Gbps SFP
(1000Base-SX: 550m using OM3 MMF)
(1000Base-LX: 5km using SMF)
(1000Base-LX10: 10km using SMF)

RS-232

1x 3-Pin Phoenix Connector | 2-way | API Programmable

1x IR TX 3.5mm TS Mono Jack | API Programmable
1x IR RX 3.5mm TRS Stereo Jack | API Programmable

USB

1x USB 2.0 Type Host
(Up to 300Mbps upstream)

Security Protocols

AES 128 | SSH | TLS | HTTPS

POWER

Power Supply

12V DC 1A | 802.3af PoE Compliant

Power Consumption

Max 15.4 | Average: 8w

Additional Features

Supports multi-channel audio passthrough including DTS:X & Dolby Atmos
Hugely scalable I/O, utilizing multicast technology
CEC One-Touch Play & Standby, bidirectional IR or RS-232 control of connected devices
Custom “No Source” idle image upload for branded down time
Analog audio de-embed output with volume control
Batch firmware update and batch settings functions offers a massive reduction on installation times
Custom EDID management with import/export

The post NHD-500-DNT-TX appeared first on Wave Electronics Systems.