Wyrestorm » AV Over IP » NetworkHD 600 Series » Wave Electronics Systems

NHD-600-TRXF

admin — Tue, 30 May 2023 11:57:06 +0000

The NHD-600-TRXF is a SDVoE fiber transceiver capable of lossless & latency-free 4K60 over a 10Gb network. The TRXF allows you to transmit and receive A/V simultaneous through a single device or be programmed to act as a dedicated TX or RX. The SFP+ connector supports up to 300m (984ft), 10Gbps transmission distance for extremely long reach commercial applications. 3 x High-Speed USB 2.0 ports allow extension for keyboard & mouse applications and even compatibility with webcams, touchscreens, and media storage.

AUDIO & VIDEO

Inputs/Outputs

1x HDMI 2.0b Input
1x HDMI 2.0b Output
1x 5-pin Balanced Analog Audio
1x 10Gb/s SFP+:
– 10GBASE-SR: 300m using OM3 multi-mode
– 10GBASE-LR: 10km using OM3 single-mode

Video Encoding/Decoding

SDVoE Pixel Pipeline

Encoding/Decoding Data Rate

1080p@60Hz 8bit – 3.4Gbps
4K UHD@30Hz 4:4:4 8bit – 6.4Gbps
4K UHD@60Hz 4:4:4 8bit – 8.7Gbps (with light compression)

End to End Latency

Genlock Mode: Uncompressed = 30us, Compressed <120us
Fast Switch Mode: 1~2 video frames = min. between 16.7 – 33.4ms @ 60fps

Video Resolution (Max)

4096x2160p @ 60Hz 8bit 4:4:4 or RGB
3840x2160p @ 60Hz 12bit 4:2:2 Dolby Vision
3840x 2160p @ 60Hz 10bit 4:2:2 HDR10/HLG
1920x1080p @60Hz 12bit

Supported Standards

RGB | DCI | Rec. 709 | BT.2020

COMMUNICATION & CONTROL

HDMI

HDCP 2.2 | CEC

Ethernet

1x 1GbE LAN 8-pin RJ45

RS-232

1x 3-pin Phoenix Connector | 2 Way | Broadcast | Routed | API Programmable

1x IR TX 3.5mm TS Mono Jack | API Programmable
1x IR RX 3.5mm TRS Stereo Jack | API Programmable

USB

3x USB 2.0 Type A
1x USB 2.0 Type B Host
USB Bandwidth: 480Mbps

POWER

Power Supply

12V 2A DC PSU

Max Power Consumption

Max: 24w | Average: 10w

ADDITIONAL FEATURES

Capable of high-bitrate multichannel audio passthrough, including Dolby Atmos and DTS:X
Powerful video scaling can match a connected display to the video source, leaving the original source content unaltered
Video resolution, framerate and color space conversion using SMPTE/ITU recommended methods
Genlock scaler mode for zero end-to-end latency
Supports seamless AV source switching via Fast Switch mode
Balanced analog audio port can be configured as an input or output for a discrete audio stream or HDMI de-embedding
Bidirectional IP to Infrared / RS-232 functionality via the API or 3rd-party drivers
Auxiliary 1GbE channel for network connectivity of attached source devices
Powerful matrix functionality includes routing control of all audio, video, RS-232 and IR signals
Compatible with NHD-000-RACK4 for easy rack mounting
Secure A/V transmissions using AES encryption methods
*Preview streams not supported

The post NHD-600-TRXF appeared first on Wave Electronics Systems.

NHD-000-RACK4

admin — Tue, 30 May 2023 11:57:05 +0000

The NHD-000-RACK4 is a 6U rack mount that provides a clean installation for up to 12 NetworkHD 100 Series, 250 Decoder, 400, 500 and 600 Series encoders or decoders. The NHD-000-CTL NetworkHD controller is also compatible allowing for all required devices to be installed in a single location.

The slimline and thermally optimized design helps keep your centralized NetworkHD solution perfectly organized.

DIMENSIONS & WEIGHT

Rack Units | Wall Box

Height With | Without Feet

265.9mm/10.47in | 265.9mm/10.47in

Width With | Without Brackets

483mm/19.02in | 440mm/17.33in

Depth With | Without Handles

188.3mm/7.42in | 150mm/5.91in

Weight (Chassis without Plates)

2.3kg/5.06lbs

Additional Features

The NHD-000-RACK4 does not come with encoder/decoder/controller device mounting brackets. These are required to mount encoders/decoders/controller into the NHD-000-RACK4. Device mounting brackets are included with the device, in the box.
The NHD-000-RACK4 includes 7 blanking plates. Additional NHD-000-RACK4 blanking plates are also available separately: (NHD-RACK4-BLK)
6U height and shallow depth allows for high component density in an AV or IT equipment rack
12 slots suitable for mounting a combination of 100 Series, 250 Decoder, 400 Series, 500 Series, 600 Series & NetworkHD Controller devices
NetworkHD encoders or decoders can be mounted with connections front or rear facing to suit alternative cable management designs
The included removable rear cable management lacing bar helps route cabling at the correct point to optimize thermal efficiency
The included removable front-facing handles greatly improves maneuverability and convenience
Provides optimal thermal dissipation in a passively or actively cooled rack design to maintain premium device performance and MTBF
Enables systems to be pre-built into the rack kit prior to arriving on site to improve speed and efficiency of installation
Sturdy all-steel design creates a solid structure for supporting NetworkHD components
Includes 7x blanking plates

* excludes NHD-400-TX-IW

The post NHD-000-RACK4 appeared first on Wave Electronics Systems.

NHD-000-CTL

admin — Tue, 30 May 2023 11:57:05 +0000

The NHD-000-CTL is the innovative control interface that makes the powerful NetworkHD system the most simple and quickest-to-configure AV over IP system available.

The NHD-000-CTL IP controller is designed to be used with NetworkHD 100, 200, 400 & 600 Series systems to bridge the various encoders and decoders to a single, API-based connection point for use by a control processor or the NetworkHD Touch App. The NHD-000-CTL also provides monitoring and remote access for Integrators via its on-board Web UI.

Two isolated NICs provide the option to interface with two separate Networks or VLANs offering a secure and hassle-free option for simple switch setups.

COMMUNICATION AND CONTROL

Ethernet

1x LAN AV – 8-pin RJ-45 female
1x LAN Control – 8-pin RJ-45 female
10/100 Mbps auto-negotiating)

RS-232

1x RS-232 6-pin Phoenix Connector

POWER

Power Supply

12V DC 1A

PoE

802.3af PoE

Power Consumption

1.6W

ENVIRONMENTAL

Operating Temperature

0 to + 45°C (32 to + 113 °F), 10% to 90%, non-condensing

Storage Temperature

-20 to +70°C (-4 to + 158 °F), 10% to 90%, non-condensing

Maximum BTU

5.45 BTU/hr

Dimensions

138.7mm x 93.2mm x 26mm/5.47″ x 3.67″ x 1.1in” (1RU)

Weight

0.4kg / 0.88lbs

Additional Features

Uses SSH and Telnet over TLS for secure and encrypted API access
Secure web interface access using HTTPS
Compatible with all NetworkHD 100, 200, 400, and 600 components
Instant deployment available for the NetworkHD Touch iPad control App to provide live video previews and drag and drop source selection
Provides automatic discovery of NetworkHD devices
Simple, intuitive Web-based configuration of encoder and decoder settings
Interface to major control systems through powerful drivers
IP control via LAN (Telnet & Web GUI) and a third party controller (API)
Unified control and configuration access for most NetworkHD components
Compatible with configuration files from PC configurator to quickly and reliably perform matrix operations for encoders and decoders

The post NHD-000-CTL appeared first on Wave Electronics Systems.

NHD-610

admin — Tue, 30 May 2023 11:57:05 +0000

The NetworkHD 610 TX and RX expand the functionality of the powerful SDVoE 600 series product line. The 610s retain many of the capabilities found on the other models, such as full HDMI 2.0 encoding, zero latency transmissions, video wall and multiview processing. However, the 610s pack an extra punch by incorporating a Dante/AES67 output on the NHD-610-TX, allowing audio from the HDMI or analog audio input to transmit to Dante/AES67 enabled amplifiers, DSP or mixers. Both the TX and RX are also equipped with a full speed USB 2.0 chipset maximizing compatibility with thousands of USB peripherals for extension over the network, such as a keyboard/mouse, webcams, touchscreens, or just simple data transfers.

AUDIO & VIDEO

Inputs

TX:
1x HDMI 2.0
1x 5-pin Balanced Analog Audio

RX:
1x HDMI 2.0 (Switchable)
1x 5-pin Balanced Analog Audio
1x 10GbE 8-Pin RJ45

Outputs

TX:
1x HDMI 2.0 Loop Out
1x 5-pin Balanced Analog Audio Out
1x 10GbE 8-Pin RJ45

RX:
1x HDMI 2.0 Output
1x 5-pin Balanced Analog Audio Out

Maximum Pixel Clock

600MHz

Output Video Encoding

SDVoE Pixel Pipeline | Dante/
AES67 proprietary protocols

Encoding Data Rate

1080p@60Hz 8bit – 3.4Gbps
4K UHD@30Hz 4:4:4 8bit – 6.4Gbps
4K UHD@60Hz 4:4:4 8bit – 8.7Gbps (with light compression)

Max End to End Latency

Genlock Mode: Uncompressed = 30us, Compressed <120us
Fast Switch Mode: 1~2 video frames = min. between 16.7 – 33.4ms @ 60fps

Video Resolution (Max)

4096x2160p @ 60Hz 8bit 4:4:4 or RGB
3840x2160p @ 60Hz 12bit 4:2:2 Dolby Vision
3840x 2160p @ 60Hz 10bit 4:2:2 HDR10/HLG
1920x1080p @ 60Hz 12bit

Supported Standards

RGB | DCI | USB

COMMUNICATION & CONTROL

HDMI

HDMI 2.0b | HDCP 2.2 | CEC | EDID

LAN

1x 1GbE 8-pin RJ45 (Auxiliary Lan)

RS-232

1x 3-pin Phoenix Connector | 2 Way | Broadcast | Routed | API Programmable

1x IR TX 3.5mm TS Mono Jack | API Programmable
1x IR RX 3.5mm TRS Stereo Jack | API Programmable

USB

TX:
3x USB 2.0 Type A
1x USB 2.0 Type B Host
USB Bandwidth: 480Mbps

RX:
3x USB 2.0 Type A
1x USB 2.0 Type B Host
USB Bandwidth: 480Mbps

POWER

Power Supply

12V 2A DC PSU | 802.3at PoE+ Compliant

Power Consumption

Max: 24w | Average: 10w

Additional Features

Capable of high-bitrate multichannel audio passthrough, including Dolby Atmos and DTS:X
Powerful video scaling can match a connected display to the video source, leaving the original source content unaltered
Video resolution, framerate and color space conversion using SMPTE/ITU recommended methods
Genlock scaler mode for zero end-to-end latency
Supports seamless AV source switching via Fast Switch mode
Bidirectional IP to Infrared / RS-232 functionality via the API or 3rd-party drivers
Powerful matrix functionality includes routing control of all audio, video, RS-232 and IR signals
Compatible with NHD-000-RACK4 for easy rack mounting
Secure A/V transmissions using AES encryption method

The post NHD-610 appeared first on Wave Electronics Systems.

NHD-600-TRX

admin — Tue, 30 May 2023 11:57:05 +0000

The NHD-600-TRX is a SDVoE transceiver capable of lossless & latency-free 4K60 over a 10GbE network. The TRX allows you to transmit and receive A/V simultaneous through a single device or be programmed to act as a dedicated TX or RX. 3 x USB HID ports allow extension for keyboard and mouse applications such as a corporate meeting room or an operating center. A cutting-edge architecture provides an efficient, small footprint and support for PoE+.

AUDIO & VIDEO

Inputs/Outputs

1x HDMI 2.0b Input
1x HDMI 2.0b Output
1x 5-pin Balanced Analog Audio
1x 10GbE 8-pin RJ45

Video Encoding/Decoding

SDVoE Pixel Pipeline

Encoding/Decoding Data Rate

1080p@60Hz 8bit – 3.4Gbps
4K @30Hz 4:4:4 8bit – 6.4Gbps
4K @60Hz 4:4:4 8bit – 8.7Gbps (with light compression)

End to End Latency

Genlock Mode: Uncompressed = 30us, Compressed <120us
Fast Switch Mode: 1~2 video frames = min. between 16.7 – 33.4ms @ 60fps

Video Resolution (Max)

4096x2160p @ 60Hz 8bit 4:4:4 or RGB
3840x2160p @ 60Hz 12bit 4:2:2 Dolby Vision
3840x 2160p @ 60Hz 10bit 4:2:2 HDR10/HLG
1920x1080p @60Hz 12bit

Supported Standards

RGB | DCI | Rec. 709 | BT.2020

COMMUNICATION & CONTROL

HDMI

HDCP 2.2 | CEC

Ethernet

1 x 1GbE LAN 8-pin RJ45

RS-232

1x 3-pin Phoenix Connector | 2 Way | Broadcast | Routed | API Programmable

1 x IR TX 3.5mm TS Mono Jack | API Programmable
1 x IR RX 3.5mm TRS Stereo Jack | API Programmable

USB

3 x USB 1.1 Type A
1 x USB 1.1 Type B Host

POWER

Power Supply

12V 2A DC PSU | 802.3at PoE+ compliant

Max Power Consumption

Max: 24w | Average: 10w

ADDITIONAL FEATURES

Capable of high-bitrate multichannel audio passthrough, including Dolby Atmos and DTS:X
3x USB 1.1 HID ports for extension of keyboard & mouse applications
Powerful video scaling can match a connected display to the video source, leaving the original source content unaltered
Video resolution, framerate and color space conversion using SMPTE/ITU recommended methods
Genlock scaler mode for zero end-to-end latency
Supports seamless AV source switching via Fast Switch mode
Balanced analog audio port can be configured as an input or output for a discrete audio stream or HDMI de-embedding
Bidirectional IP to Infrared / RS-232 functionality via the API or 3rd-party drivers
Auxiliary 1GbE channel for network connectivity of attached source devices
Powerful matrix functionality includes routing control of all audio, video, RS-232 and IR signals
Compatible with NHD-000-RACK4 for easy rack mounting
Secure A/V transmissions using AES encryption methods
*Preview streams not supported

The post NHD-600-TRX appeared first on Wave Electronics Systems.