Wyrestorm » Matrix Switchers » HDBASET Matrix » Wave Electronics Systems

MXV-0808-H2L

admin — Tue, 30 May 2023 09:14:48 +0000

he latest in market leading matrix solutions, WyreStorm’s H2L brings the familiar power of the MXV platform, offering transmission of HDMI content up to 4K/60 4:4:4 & HDR to 35m/115ft, pairing powerful HDBaseT & WyreStorm’s variable lite compression technologies. The MXV-0808-H2L has 8 Class B HDBaseT zone outputs with PoH and 2 mirrored HDMI outputs; additionally, the MXV-0808-H2L also supports custom CEC triggering for all connected screens, RS232 routing and A/V mute function enhances the offering for the modern home or commercial installation.

AUDIO & VIDEO

Inputs

8x HDMI In

Outputs

8x HDBT Out
2x HDMI Out (Mirrored)

Output Video Encoding

HDBaseT Class B

End to End Latency

10μs (micro seconds)

Audio Formats

HDMI: 2ch LPCM | Multichannel up to Dolby Atmos and DTS-X

Video Resolution (Max)

1920x1080p @60Hz 12bit

HDMI: 15m/49ft
Cat6: 60m/197ft
Cat6a/7: 70m/230ft

1920x1080p @120Hz 12bit

HDMI: 7m/23ft
Cat6: 35m/115ft
Cat6a/7: 40m/131ft

3840x2160p @30Hz 8bit 4:4:4

HDMI: 7m/23ft
Cat6: 35m/115ft
Cat6a/7: 35m/115ft

3840x2160p @60Hz 10bit 4:2:0 HDR

HDMI: 3m/10ft
Cat6: 35m/115ft
Cat6a/7: 40m/131ft

4096x2160p @60Hz 8bit 4:2:0

HDMI: 7m/23ft
Cat6: 35m/115ft
Cat6a/7: 40m/131ft

4096x2160p @60Hz 8bit 4:4:4

HDMI: 3m/10ft
Cat6: 35m/115ft
Cat6a/7: 40m/131ft

Note: WyreStorm recommends the use of shielded category cable to minimize signal noise and interference.

Supported Standards

DCI | RGB | HDR | HDR10 | Dolby Vision up to 30Hz | HLG | BT.2020 | BT.2100

Maximum Pixel Clock

HDMI: 600MHz | HDBaseT: 297MHz

COMMUNICATION AND CONTROL

HDMI

HDMI 2.0 | HDCP 2.2 | EDID | CEC | DVI/D supported with adapter (not included)

HDBaseT

HDMI 2.0 | HDCP 2.2 | EDID | 1-way PoH | Bidirectional IR

CEC

Custom and standard CEC power triggering via API | Requires CEC compatibility | HDMI outputs only

8x IR RX: 3.5mm (1/8in) TRS Stereo
8x IR TX: 3.5mm (1/8in) TS Mono
Bidirectional over HDBaseT

RS-232

1x RS-232: 9-pin DB9 Female
Routable RS-232 Device Control

Ethernet

1x LAN: 8-pin RJ-45 Female

POWER

Power Supply

100~240V AC 50/60Hz

The post MXV-0808-H2L appeared first on Wave Electronics Systems.

MXV-0808-H2A v3

admin — Tue, 30 May 2023 09:14:48 +0000

Offering transmission of 18Gbps HDMI content up to 35m/115ft by pairing HDBaseT with WyreStorm’s powerful lossless compression algorithm, the MXV-0808-H2A brings the familiar power of the WyreStorm H2-series to a compact 1U chassis. Unlike competing compression methods such as CSC, which permanently remove color data, WyreStorm’s VLC uses lossless compression technology to ensure signal integrity.

With 8 HDBaseT zone outputs and 4 mirrored HDMI outputs–which can be paired with WyreStorm’s hybrid HDMI cables or any extender–and CEC triggering for all 12 connected screens, the MXV-0808-H2A enhances the offering for the modern home or commercial installation.

AUDIO & VIDEO

Inputs

8x HDMI In: 19-pin type A

Outputs

8x HDBT Out: 8-pin RJ-45 Female
8x S/PDIF Out: TOSLINK (Digital Optical)
4x HDMI Out: 19-pin type A

Video Encoding

HDBaseT Class B

Encoding Data Rate

9.2Gbps

Audio Formats

Analog: 2ch Analog
S/PDIF: 2ch LPCM | Dolby Digital/DTS up to 5.1ch
HDMI: 2ch LPCM | Multichannel up to Dolby Atmos and DTS-X

Video Resolution (Max)

1920x1080p @120Hz 12bit
3840x2160p @60Hz 10bit 4:2:0 HDR
4096x2160p @60Hz 8bit 4:4:4

Supported Standards

DCI | RGB | HDR | HDR10 | Dolby Vision up to 30Hz | HLG | BT.2020 | BT.2100

Maximum Pixel Clock

HDMI: 600MHz | HDBaseT: 297MHz

COMMUNICATION & CONTROL

HDMI

HDMI 2.0 | HDCP 2.2 | EDID | CEC | DVI/D supported with adapter (not included)

HDBaseT

HDMI 2.0 | HDCP 2.2 | EDID | 1-way PoH | Bidirectional IR

CEC

Custom and standard CEC power triggering via API | Requires CEC compatibility | HDMI outputs only

8x IR RX: 3.5mm (1/8in) TRS Stereo | 8x IR TX: 3.5mm (1/8in) TS Mono | Bidirectional over HDBaseT

RS-232

1x RS-232: 9-pin DB9 Female | Routable RS-232 Device Control

Ethernet

1x LAN: 8-pin RJ-45 Female

POWER

Power Supply

100~240V AC 50/60Hz

Max Power Consumption

168W

ADDITIONAL FEATURES

Proprietary compression algorithm enables 60Hz 4K UHD content (4:4:4 or HDR) to be sent over HDBaseT to 35m/115ft
4 HDMI outputs mirroring HDBaseT Outputs 1-4 for connecting additional duplicate screens, projectors or AVRs, bringing the total number of connected displays to 12
HDMI Inputs and HDMI outputs support bandwidths of up to 18Gbps
Compatible with DVI-I and DP++ v1.3 signals from compatible devices
8 Assignable audio outputs allow audio to be independently de-embedded from sources or outputs via Toslink optical
A/V Mute mode allows the routing of a signal to an output to be deactivated
API controlled standby mode allows the matrix to enter a low power state when not in use, cutting power consumption by up to 34%
SmartEDID feature also dynamically detects display/source capabilities and automatically outputs the highest possible resolution
Additional EDID management through DIP switches for global setting or via WebUI for independent management of EDID per source
Embedded WyreStorm WebUI enables simple source switching and installer set-up & configuration
WebUI includes full EDID management to read, copy, store or import EDID from connected devices
Assign a different EDID to each connected source device
Flexible control options – front panel buttons, infrared remote control, local IR, RS-232, Telnet or WebUI
ISimple switching matrix remote control included, which can be learned into a universal remote handset to allow the control of multiple devices from one handset
Can be combined with WyreStorm EXP-CON-DAC-D digital audio converter to downmix Dolby Digital 5.1 content to mix stereo and surround sound zones
Automatic or API triggered CEC power triggers for all compatible connected screens or projectors

The post MXV-0808-H2A v3 appeared first on Wave Electronics Systems.

MXV-0808-H2A-70 v3

admin — Tue, 30 May 2023 09:14:47 +0000

Offering transmission of 18Gbps HDMI content up to 70m/230ft by pairing Class A HDBaseT with WyreStorm’s powerful lossless compression algorithm, the MXV-0808-H2A-70 brings the familiar power of the WyreStorm H2-series to a compact 1U chassis. Unlike competing compression methods such as CSC, which permanently remove color data, WyreStorm’s VLC uses a lossless compression technology to ensure signal integrity.

With 8 Class A HDBaseT zone outputs & 4 mirrored HDMI outputs–which can be paired with WyreStorm’s hybrid HDMI cables or any extender–and CEC triggering for all 12 connected screens, the 6×6 MXV-70 enhances the offering for the modern home or commercial installation.

AUDIO & VIDEO

Inputs

8x HDMI In: 19-pin type A

Outputs

8x HDBT Out: 8-pin RJ-45 Female
8x S/PDIF Out: TOSLINK (Digital Optical)
4x HDMI Out: 19-pin type A

Video Encoding

HDBaseT Class A

Encoding Data Rate

9.2Gbps

End to End Latency

10μs (micro seconds)

Audio Formats

Analog: 2ch Analog
S/PDIF: 2ch LPCM | Dolby Digital/DTS up to 5.1ch
HDMI: 2ch LPCM | Multichannel up to Dolby Atmos and DTS-X

Video Resolution (Max)

1920x1080p @120Hz 12bit
3840x2160p @60Hz 12bit 4:2:2 HDR
4096x2160p @60Hz 8bit 4:4:4

Maximum Pixel Clock

HDMI: 600MHz | HDBaseT: 297MHz

COMMUNICATION & CONTROL

HDMI

HDMI 2.0 | HDCP 2.2 | EDID | CEC
Input supports DVI/D and DisplayPort Dual-Mode (DP++) v1.3 with adapter (not included)

HDBaseT

CEC

Custom and standard CEC power triggering via API | Requires CEC compatibility

8x IR RX: 3.5mm (1/8in) TRS Stereo | 8x IR TX: 3.5mm (1/8in) TS Mono

RS-232

1x RS-232: 9-pin DB9 Female | Routable RS-232 Device Control | Matrix Control | Telnet commands supported

Ethernet

1x LAN: 8-pin RJ-45 Female | Web UI | Matrix Control

POWER

Power Supply

100~240V AC 50/60Hz

Max Power Consumption

169W

ADDITIONAL FEATURES

Use with RXV-70-4K-G2 for 70m/230ft transmission of 2160p 4:4:4/60

4K HDR HDBaseT 8×8 Matrix Switch, supporting:
- Content up to 4K/60 4:4:4 & RGB 8-bit
- The latest HDR standards, including 60Hz HDR-10 & HLG and Dolby Vision at 30Hz
- HDCP 2.2 encryption technology ensuring compatibility with the latest 4K UHD content and sources
- HD Multichannel audio up to DTS:X and Dolby Atmos to all outputs
Proprietary compression algorithm enables 60Hz 4K UHD content (4:4:4 or HDR) to be sent over HDBaseT to 70m/230ft
4 HDMI outputs mirroring HDBaseT Outputs 1-4 for connecting additional slave screens, projectors or AVR’s
HDMI Inputs and HDMI outputs support bandwidths of up to 18Gbps
8 Assignable audio outputs allow audio to be independently de-embedded from sources or outputs via Toslink optical
API controlled standby mode allows the matrix to enter a low power state when not in use, cutting power consumption by up to 34%
Automatic (signal sensing) or manual (API operated) CEC power triggering of all connected screens or projectors (CEC compatibility required)
A/V Mute function gives complete distribution control to a user allowing the signal to any zone to be independently switched off
SmartEDID feature also dynamically detects display/source capabilities and automatically outputs the highest possible resolution
Additional EDID management through DIP switches for global setting or via WebUI for independent management of EDID per source
Embedded WyreStorm WebUI enables simple source switching and installer set-up & configuration
WebUI includes full EDID management to read, copy, store or import EDID from connected devices and different EDID’s can be assigned to each connected source device
API triggered standby mode puts unit into low power state during downtime
Flexible control options – front panel buttons, infrared remote control, local IR, RS-232, Telnet or WebUI
3.5mm jack input for receiving local IR commands out of line-of-sight
Simple switching matrix remote control included, which can be learned into a universal remote handset to allow the control of multiple devices from one handset
2-way IR for far-end device control from control system or source control from a zone
Option for end-user WebUI switching interface
Compact 1U chassis with adjustable depth rack mounting brackets included
Can be combined with WyreStorm EXP-CON-DAC-D digital audio converter to downmix Dolby Digital 5.1 content to mix stereo and surround sound zones
Capable of transmitting content to 50m/164ft using WyreStorm HAOC range of hybrid optical HDMI cables
*The ability to send custom CEC commands when standard CEC commands aren’t compatible
*RS-232 routing over HDBaseT allows discrete control of all connected display devices
*Version 3 model required.

The post MXV-0808-H2A-70 v3 appeared first on Wave Electronics Systems.

MXV-0606-H2A v3

admin — Tue, 30 May 2023 09:14:47 +0000

Offering transmission of 18Gbps HDMI content up to 35m/115ft by pairing HDBaseT with WyreStorm’s powerful lossless compression algorithm, the MXV-0606-H2A v3 brings the familiar power of the WyreStorm H2-series to a compact 1U chassis. Unlike competing compression methods such as CSC, which permanently remove color data, WyreStorm’s VLC uses lossless compression technology to ensure signal integrity.

With 6 HDBaseT zone outputs and 4 mirrored HDMI outputs–which can be paired with WyreStorm’s hybrid HDMI cables or any extender–and CEC triggering for all 10 connected screens, the MXV-0606-H2A v3 enhances the offering for the modern home or commercial installation.

AUDIO & VIDEO

Inputs

6x HDMI In: 19-pin type A

Outputs

6x HDBT Out: 8-pin RJ-45 Female
6x S/PDIF Out: TOSLINK (Digital Optical)
4x HDMI Out: 19-pin type A

Video Encoding

HDBaseT Class B

Encoding Data Rate

9.2Gbps

End to End Latency

10μs (micro seconds)

Audio Formats

Analog: 2ch Analog
S/PDIF: 2ch LPCM | Dolby Digital/DTS up to 5.1ch
HDMI: 2ch LPCM | Multichannel up to Dolby Atmos and DTS-X

Video Resolution (Max)

1920x1080p @120Hz 12bit
3840x2160p @60Hz 10bit 4:2:0 HDR
4096x2160p @60Hz 8bit 4:4:4

Supported Standards

DCI | RGB | HDR | HDR10 | Dolby Vision up to 30Hz | HLG | BT.2020 | BT.2100

Maximum Pixel Clock

HDMI: 600MHz | HDBaseT: 297MHz

COMMUNICATION & CONTROL

HDMI

HDMI 2.0 | HDCP 2.2 | EDID | CEC | DVI/D supported with adapter (not included)

HDBaseT

HDMI 2.0 | HDCP 2.2 | EDID | 1-way PoH | Bidirectional IR

CEC

Custom and standard CEC power triggering via API | Requires CEC compatibility | HDMI outputs only

6x IR RX: 3.5mm (1/8in) TRS Stereo | 8x IR TX: 3.5mm (1/8in) TS Mono | Bidirectional over HDBaseT

RS-232

1x RS-232: 9-pin DB9 Female | Routable RS-232 Device Control

Ethernet

1x LAN: 8-pin RJ-45 Female

POWER

Power Supply

100~240V AC 50/60Hz

Max Power Consumption

135W

ADDITIONAL FEATURES

Proprietary compression algorithm enables 60Hz 4K UHD content (4:4:4 or HDR) to be sent over HDBaseT to 35m/115ft
4 HDMI outputs mirroring HDBaseT Outputs 1-4 for connecting additional duplicate screens, projectors or AVRs, bringing the total number of connected displays to 12
HDMI Inputs and HDMI outputs support bandwidths of up to 18Gbps
Compatible with DVI-I and DP++ v1.3 signals from compatible devices
8 Assignable audio outputs allow audio to be independently de-embedded from sources or outputs via Toslink optical
A/V Mute mode allows the routing of a signal to an output to be deactivated
API controlled standby mode allows the matrix to enter a low power state when not in use, cutting power consumption by up to 34%
SmartEDID feature also dynamically detects display/source capabilities and automatically outputs the highest possible resolution
Additional EDID management through DIP switches for global setting or via WebUI for independent management of EDID per source
Embedded WyreStorm WebUI enables simple source switching and installer set-up & configuration
WebUI includes full EDID management to read, copy, store or import EDID from connected devices
Assign a different EDID to each connected source device
Flexible control options – front panel buttons, infrared remote control, local IR, RS-232, Telnet or WebUI
ISimple switching matrix remote control included, which can be learned into a universal remote handset to allow the control of multiple devices from one handset
Can be combined with WyreStorm EXP-CON-DAC-D digital audio converter to downmix Dolby Digital 5.1 content to mix stereo and surround sound zones
Automatic or API triggered CEC power triggers for all compatible connected screens or projectors

The post MXV-0606-H2A v3 appeared first on Wave Electronics Systems.