Wyrestorm » Matrix Switchers » HDMI 4K Matrix Switchers » Wave Electronics Systems

CAB-IR-LINK

admin — Tue, 30 May 2023 09:22:31 +0000

The WyreStorm CAB-IR-LINK integration cable provides integrators with a simple 2-way IR integration between WyreStorm products and any mainstream control system.
Simply plug the CAB-IR-LINK cable from the IR emitter output of any control system to the IR RX port of a WyreStorm matrix or extender set to achieve seamless control system compatibility and integration.

COMMUNICATION AND CONTROL

1x IR In: 3.5mm (1/8in) TRS Stereo
1x IR Out: 3.5mm (1/8in) TS Mono

ENVIRONMENTAL

Operating Temperature

32°F ~ 113°F (0°C ~ 45°C) | 10% ~ 90%, non-condensing

Storage Temperature

-4°F to ~ 158°F (-20°C ~ +70°C) | 10% ~ 90%, non-condensing

Maximum BTU

DIMENSIONS & WEIGHT

Cable Length

2.0m/6.4ft

Weight

0.48kg/1.05lbs

ADDITIONAL FEATURES

Compatible with most leading control systems, including: Control4, Crestron, AMX, Niles, RTI and Bitwise
1.2m (length) mono-stereo IR integration cable*
Auto-sensing polarity
Automatically adjusts for 5v or 12v control bus
Tip-VCC 5V, Ring-Signal, Sleeve-Ground

The post CAB-IR-LINK appeared first on Wave Electronics Systems.

EXP-MX-0402-H2

admin — Tue, 30 May 2023 09:22:31 +0000

A vast upgrade from its predecessor, the EXP-MX-0402-H2 takes the EXP-MX0402-010 features to new heights, whilst maintaining its cost effect platform. Keeping up with the latest standards, the EXP-MX-0402-H2 has been upgraded to an 18Gbps backbone with HDCP 2.2 compliance and now featuring a powerful built-in auto scaler on both of its outputs allowing users to simultaneously connect a mix of 4K and 1080p displays.

If that wasn’t enough, the EXP-MX-0402-H2 also includes analog and digital audio de-embed and ARC, as well as CEC triggering and RS-232 control, hosting a boat load of control features. Coupled with the WyreStorm TS-280 touchscreen and HAOC line of HDMI cables makes for the perfect power pack solution for mid to large scale residential and light commercial applications!

AUDIO & VIDEO

Inputs

4x HDMI In 19-pin HDMI type A

Outputs

2x HDMI Out 19-pin HDMI type A
1x 3.5mm Analog Stereo
1x S/PDIF Toslink

Audio Formats

HDMI: 2ch PCM |
Multichannel: LPCM and up to DTS-X and Dolby Atmos
Analog: 2ch LPCM
Toslink: 5.1ch surround sound

Video Resolution (Max)

1920x1080p @60Hz 16bit
3840x2160p @60Hz 10bit 4:2:0 HDR
4096x2160p @60Hz 8bit 4:4:4

Supported Sandards

DCI | RGB | HDR | HDR10 | Dolby Vision up 30Hz | HLG | BT.2020 | BT.2100

Maximum Pixel Clock

600Mhz

COMMUNICATION & CONTROL

HDMI

HDCP 2.2 | DVI-D supported with adapter (not included)

RS-232

1x 3-Pin Terminal Block

1x Front Panel Sensor

POWER

Power Supply

5V DC 1A

Max Power Consumption

ADDITIONAL FEATURES

Routes up to four 4K HDR HDMI sources to two 4K HDR display devices such as a TV or digital projector
Supports 4K@60Hz 10bit 4:2:0 | 4:4:4 and HDR@24Hz 10bit BT.2020
HDMI Inputs and HDMI outputs support bandwidths of up to 18Gbps
Fully HDCP 2.2 compliant
HDR and Dolby Vision support
Each HDMI output supports scaling down to 1080p without affecting 4K source content
Supports analog audio de-embed from output 1
Supports digital audio de-embed from output 2 or HDMI ARC from a smart display via easy to use sliding switch
Rich control options including IR, push button controls and RS-232 control, perfect for use with WyreStorm’s TS-280 touch screen
Support of timed CEC trigger and time delay on both outputs when input is not detected on selected output.
Enhanced API offers an abundance of control features such as video switching, audio mute of discrete audio outputs, CEC trigger and time delay, EDID control and many troubleshooting options
Supports 12-bit Deep Color, 3D, Lip Sync and loss-less HD audio formats pass through

The post EXP-MX-0402-H2 appeared first on Wave Electronics Systems.

MX-0808-H2A-MK2

admin — Tue, 30 May 2023 09:22:31 +0000

The MX-0808-H2A-MK2 is a welcome refresh to the powerful line of H2A pure HDMI switchers. The MK2 is familiar on the surface but has a host of improvements and added features. To start, the HDMI outputs now feature 4K > 1080p downscalers promoting easier integration of mixed resolution displays into a single system. The HDMI outputs also now support Audio Return Channel from smart TVs to bring audio from apps like Netflix, Prime Video, Hulu, etc.…to an external audio system. Speaking of audio, the analog audio outputs have been updated to balanced connections to ensure there is no loss in fidelity or interference.

AUDIO & VIDEO

Inputs

8x HDMI In

Outputs

8x HDMI Out
8x 5-pin Balanced Analog Audio
8x S/PDIF Digital Audio

Audio Formats

2ch PCM | Multichannel: LPCM and Up to DTS-X and Dolby Atmos

Video Resolution (Max)

1920x1080p @60Hz 16bit
3840x2160p @60Hz 10bit 4:2:2 HDR10/10+
3840x2160p @60Hz 12bit 4:2:0 Dolby Vision
3840x2160p @50Hz 10bit 4:2:2 HLG
4096x2160p @60Hz 8bit 4:4:4

Supported Standards

DCI | RGB | HDR10 | HDR10+ | Dolby Vision | HLG | BT.2020

Maximum Pixel Clock

600MHz

COMMUNICATION & CONTROL

HDMI

HDMI 2.0 | HDCP 2.2 | EDID | CEC (display power trigger)

RS-232

1x 3-pin Phoenix for API control

LAN

1x 8-pin RJ-45 for API control

POWER

Power Supply

100~240V AC 50/60Hz AC

Max Power Consumption

60W

ADDITIONAL FEATURES

Uncompressed HDMI signal distribution supporting full 18Gbps bandwidth and 4K/60 4:4:4 video content
Pair with WyreStorm HAOC cables to send uncompressed HDMI video up to 50 meters.
Compatible with latest HDR video standards including HDR10, HDR10+ Dolby Vision and HLG
Balanced analog and digital S/PDIF audio de-embed for distributing audio to an amplifier or DSP
Each HDMI output supports 4K to 1080p downscaling to support mixed resolution systems
Output downscaling controlled intuitive web UI or API commands
Automatic or manual CEC power triggering of displays through HDMI outputs via API. Allows custom CEC commands to expand compatibility with displays.
Audio Return Channel supported on all 8 outputs allowing up to 5.1 audio from smart TV apps to be distributed to external audio systems such as an AVR or stereo amplifier.
Supports AV Mute for enabling disabling HDMI outputs per zone
API triggered standby mode puts unit into low power state during downtime
EDID Management through API or front panel buttons
1U 19” chassis for convenient installation into standard equipment racks

The post MX-0808-H2A-MK2 appeared first on Wave Electronics Systems.

MX-0404-HDMI

admin — Tue, 30 May 2023 09:22:31 +0000

The WyreStorm MX-0404-HDMI is a powerful plug and play matrix switcher, bundled in a small compact chassis for ease of installation. An 18Gbps matrix switcher, it allows up to four 4K sources to be independently routed to four displays. Additionally, each output has the capability to scale 4K content down to connected 1080p displays without affecting 4K sources. Audio following the output can be extracted via the digital 5.1 S/PDIF, allowing it to be sent to an external audio distribution system.

This small, yet robust 18Gbps HDMI switch comes fully equipped to fit in a standard 19” rack space, designed with professional installations in mind.

AUDIO & VIDEO

Inputs

4x HDMI In: 19-pin type A

Outputs

4x HDMI Out: 19-pin type A
1x IR Extension | 4x S/PDIF Coaxial

Audio Formats

HDMI: 2ch PCM
Multichannel: LPCM and up to DTS-X and Dolby Atmos
Coaxial: 5.1ch surround sound

Video Resolution (Max)

1920x1080p @60Hz 16bit
3840x2160p @60Hz 10bit 4:2:0 HDR
4096x2160p @60Hz 8bit 4:4:4

Supported Standards

DCI | RGB | HDR | HDR10 | Dolby Vision up to 30Hz | HLG | BT.2020 | BT.2100

Maximum Pixel Clock

600MHz

COMMUNICATION & CONTROL

HDMI

HDCP 2.2 | DVI-D supported with adapter (not included)

RS-232

1x 3-Pin Terminal Block | Matrix Control (Telnet commands supported)

1x Front Panel Sensor | 1x IR Ext 3.5mm (1/8in) TRS Stereo | Matrix Control

Ethernet

1x LAN: 8-pin RJ-45 Female | 10/100 Mbps auto-negotiating | IP Control | Web UI

POWER

Power Supply

5V DC 2A

Max Power Consumption

10W

ADDITIONAL FEATURES

Routes up to four 4K HDR HDMI sources to four 4K HDR display devices such as a TV or digital projector
Supports 4K@60Hz 10bit 4:2:0 | 4:4:4 and HDR@24Hz 10bit BT.2020
HDMI Inputs and HDMI outputs support bandwidths of up to 18Gbps
Fully HDCP 2.2 compliant
HDR and Dolby Vision support
Each HDMI output supports scaling down to 1080p without affecting 4K source content
Supports coaxial S/PDIF audio de-embed from all outputs.
Rich control options including IR, push button controls, LAN, WebUI & RS-232 control.
Support of timed CEC trigger and time delay on both outputs when input is not detected on selected output.
Enhanced WebUI & API offeres an abundance of control features such as video switching, audio mute of discrete audio outputs, CEC trigger and time delay, EDID control and many troubleshooting options
Supports 12-bit Deep Color, Lip Sync and loss-less HD audio formats pass through

The post MX-0404-HDMI appeared first on Wave Electronics Systems.