Wyrestorm » Matrix Switchers » Matrix + Receiver Kits » Wave Electronics Systems

CAB-IR-LINK

admin — Tue, 30 May 2023 09:30:11 +0000

The WyreStorm CAB-IR-LINK integration cable provides integrators with a simple 2-way IR integration between WyreStorm products and any mainstream control system.
Simply plug the CAB-IR-LINK cable from the IR emitter output of any control system to the IR RX port of a WyreStorm matrix or extender set to achieve seamless control system compatibility and integration.

COMMUNICATION AND CONTROL

1x IR In: 3.5mm (1/8in) TRS Stereo
1x IR Out: 3.5mm (1/8in) TS Mono

ENVIRONMENTAL

Operating Temperature

32°F ~ 113°F (0°C ~ 45°C) | 10% ~ 90%, non-condensing

Storage Temperature

-4°F to ~ 158°F (-20°C ~ +70°C) | 10% ~ 90%, non-condensing

Maximum BTU

DIMENSIONS & WEIGHT

Cable Length

2.0m/6.4ft

Weight

0.48kg/1.05lbs

ADDITIONAL FEATURES

Compatible with most leading control systems, including: Control4, Crestron, AMX, Niles, RTI and Bitwise
1.2m (length) mono-stereo IR integration cable*
Auto-sensing polarity
Automatically adjusts for 5v or 12v control bus
Tip-VCC 5V, Ring-Signal, Sleeve-Ground

The post CAB-IR-LINK appeared first on Wave Electronics Systems.

MX-0404-KIT

admin — Tue, 30 May 2023 09:30:11 +0000

An established leader in AV matrix solutions, WyreStorm packs a wealth of experience into this powerful yet compact 1U chassis. Offering transmission of HDMI content up to 4K UHD & HDR content to 35m/115ft, pairing HDBaseT with WyreStorm’s powerful crosspoint HDMI switching chipset. The MX-0404-KIT has 3 HDBaseT zone outputs with PoH and a single switched HDMI output which can be paired with WyreStorm’s HAOC hybrid optical HDMI cables or any extender for transmission via HDBaseT or OM3 fiber. The MX-0404-KIT doesn’t stop there, offering zone audio breakout via S/PDIF, CEC triggering for all connected screens and the A/V mute function enhances the offering for the modern home or commercial installation.

AUDIO & VIDEO

Inputs

4x HDMI In: 19-pin type A

Outputs

4x S/PDIF Out: RCA Female
3x HDBT Out: 8-pin RJ-45 Female
1x HDMI Out: 19-pin type A

Video Encoding

HDBaseT Class B

Encoding Data Rate

9.2Gbps

End to End Latency

10μs (micro seconds)

Audio Formats

HDMI/HDBaseT: 2ch LPCM | Multichannel up to Dolby Atmos and DTS-X
S/PDIF: 2ch LPCM | Dolby Digital/DTS up to 5.1ch
Analog: 2ch Analog

Video Resolution (Max)

1920x1080p @60Hz 16bit
3840x2160p @60Hz 8bit 4:2:0

Supported Standards

DCI (4096×2160) | RGB | HDR | HDR10 | Dolby Vision up to 30Hz | HLG | BT.2020 | BT.2100

Maximum Pixel Clock

HDBaseT: 340MHz

COMMUNICATION & CONTROL

HDMI

HDMI 2.0 | HDCP 2.2 | EDID | CEC | DVI/D supported with adapter (not included)

HDBaseT

CEC

CEC power triggering for connected screens – Requires CEC compatibility

3x IR RX: 3.5mm (1/8in) TRS Stereo
4x IR TX: 3.5mm (1/8in) TS Mono
Bidirectional over HDBaseT

RS-232

1x RS-232: 9-pin DB9 Female

Ethernet

1x LAN: 8-pin RJ-45 Female

POWER

Power Supply

100~240V AC 50/60Hz

Max Power Consumption

48.2W

ADDITIONAL FEATURES

HDBaseT enables 60Hz 4K UHD content (8-bit) to be sent over HDBaseT to 35m/115ft
Compatible with DVI-I and DP++ v1.3 signals from compatible devices
4 audio outputs allow audio to be independently de-embedded from outputs via S/PDIF coaxial
SmartEDID feature also dynamically detects display/source capabilities and automatically outputs the highest possible resolution
Additional EDID management through DIP switches for global setting or via WebUI for independent management of EDID per source
Embedded WyreStorm WebUI enables simple source switching and installer set-up & configuration
WebUI includes full EDID management to read, copy, store or import EDID from connected devices
Assign a different EDID to each connected source device
API triggered standby mode puts unit into low power state during downtime
Flexible control options – front panel buttons, infrared remote control, local IR, RS-232, Telnet or WebUI
3.5mm jack input for receiving local IR commands out of line-of-sight
2-way IR for far-end device control from control system or source control from a zone

The post MX-0404-KIT appeared first on Wave Electronics Systems.

MX-0808-KIT v2

admin — Tue, 30 May 2023 09:30:11 +0000

The MX-0808-KIT v2 gets a make over, sharing many of the same powerful features of version 1, but with a vision of lite commercial installations in mind. Offering the same transmissions of 4K UHD up to 35m/115ft, but now up to 8 HDBaseT outputs with included receivers. Additionally, version 2 is equipped with 4 mirrored outputs, which can be paired with any of our HAOC hybrid optical HDMI cables to connect to 4 additional screens. Also new and fitting are 4 balanced analog audio outputs 2ch support to connect to ceiling/over–hanging speakers or to an audio amplifier. Lastly, still enjoy the same great features of version 1, including CEC triggering, A/V mute and standby mode to extend the life of the matrix during downtime.

AUDIO & VIDEO

Matrix

Receivers

Inputs

8x HDMI: 19-pin type A

1x HDBT: 8-pin RJ-45 Female

Outputs

8x HDBT: 8-pin RJ-45 Female
4x 5-pin Balanced Analog Audio

1x HDMI: 19-pin type A

Output Video Encoding

HDBaseT Class B

Encoding Data Rate

9.2Gbps

End to End Latency

10μs (micro seconds)

Audio Formats

HDMI/HDBaseT: 2ch LPCM | Multichannel up to Dolby Atmos and DTS-X
Analog Output: 2ch PCM

Video Resolutions (Max)

1920x1080p @60Hz 16bit
3840x2160p 10bit 4:2:0 HDR
3840x2160p @30Hz 8bit 4:4:4
3840x2160p @60Hz 8bit 4:2:0

Supported Standards

DCI | RGB | HDR10 | HLG | BT.2020

Maximum Pixel Clock

HDBaseT: 340MHz

COMMUNICATION & CONTROL

HDMI

HDMI 1.4 | HDCP 2.2 | EDID | CEC

HDBaseT

CEC

CEC power triggering for connected screens – Requires CEC compatibility

8x IR RX: 3.5mm (1/8in)
8x IR TX: 3.5mm (1/8in)

1x IR TX: 3.5mm (1/8in)
1x IR RX: 3.5mm (1/8in)

RS-232

1x RS-232: DB9 Female (API)

1x RS-232: 3-pin Terminal Block

Ethernet

1x LAN: 10/100BaseT RJ-45

POWER

Power Supply

100~240V AC 50/60Hz

18V DC (Optional)

PoH

1-way Matrix to Receiver

Max Power Consumption

105.4W

4.5W with External PSU5W via PoH

ADDITIONAL FEATURES

True 8×8 matrix with 8 HDBaseT zones and 4 mirrored HDMI outputs
SmartEDID feature also dynamically detects display/source capabilities and automatically outputs the highest possible resolution
Additional EDID management through DIP switches for global setting or via WebUI for independent management of EDID per source
Embedded WyreStorm WebUI enables simple source switching and installer set-up & configuration
WebUI includes full EDID management to copy EDID from connected devices
Independent user control interface with separate password-protected installer settings
Personalize switching interface with source and output labelling
Hide unused I/O for cleaner appearance and navigation
API triggered standby mode puts unit into low power state during downtime
2-way IR for far-end device control from control system or source control from a zone.
US, UK, EU & AU Power cables included
Compact 1U chassis with adjustable depth rack mounting brackets included

The post MX-0808-KIT v2 appeared first on Wave Electronics Systems.

MXV-0404-H2A-KIT

admin — Tue, 30 May 2023 09:30:11 +0000

Offering transmission of 18Gbps HDMI content up to 35m/115ft by pairing HDBaseT with WyreStorm’s powerful lossless compression algorithm, the MXV-0404-H2A-KIT brings the familiar power of the WyreStorm H2-series to a compact 1U chassis. Unlike competing compression methods such as CSC, which permanently remove color data, WyreStorm’s VLC uses a lossless compression technology to ensure signal integrity.

With 4 HDBaseT zone outputs and a mirrored HDMI output offering CEC triggering for all 5 connected screens, this kit enhances the offering for the modern home or commercial installation. Internal audio switching allows audio breakout from source or zone output via S/PDIF and analog stereo ports. Being a second generation product, now two of the included receivers are upgraded to scaling receivers, RXV-35-SCL, allowing compatibility between 1080p screens and 4K sources and additional 2ch/5.1 audio breakouts.

AUDIO & VIDEO

Inputs

4x HDMI In: 19-pin type A

Outputs

4x Audio Out: RCA Female Stereo (L/R)
4x S/PDIF Out: RCA Female
4x HDBT Out: 8-pin RJ-45 Female

Video Encoding

HDBaseT Class B

Encoding Data Rate

9.2Gbps

End to End Latency

10µs (micro seconds)

Audio Formats

Analog: 2ch Analog
S/PDIF: 2ch LPCM | Dolby Digital/DTS up to 5.1ch
HDMI: 2ch LPCM | Multichannel up to Dolby Atmos and DTS-X

Video Resolution (Max)

1920x1080p @60Hz 16bit
3840x2160p @60Hz 10bit 4:2:0 HDR
4096x2160p @60Hz 8bit 4:4:4

Supported Standards

DCI | RGB | HDR | HDR10 | Dolby Vision up to 30Hz | HLG | BT.2020 | BT.2100

Maximum Pixel Clock

HDMI: 600MHz | HDBaseT: 297MHz

COMMUNICATION & CONTROL

HDMI

HDMI 2.0 | HDCP 2.2 | EDID | CEC | DVI/D supported with adapter (not included)

HDBaseT

CEC

CEC power triggering for connected screens – Requires CEC compatibility

1x IR Ext: 3.5mm (1/8in) TRS Stereo
4x IR RX: 3.5mm (1/8in) TRS Stereo
4x IR TX: 3.5mm (1/8in) TS Mono – Bidirectional over HDBaseT

RS-232

1x RS-232: 9-pin DB9 Female

Ethernet

1x LAN: 8-pin RJ-45 Female

POWER

Power Supply

100~240V AC 50/60Hz

PoH

1-way Matrix to Receiver

Max Power Consumption

85W with 4 RXs Connected via PoH

ADDITIONAL FEATURES

Automatic (signal sensing) or manual (API operated) CEC power triggering of all connected screens or projectors (CEC compatibility required)
Assignable audio outputs allow audio to be de-embedded from sources or HDBaseT output via mirrored stereo RCA and S/PDIF ports
A/V Mute mode allows the routing of a signal to an output to be deactivated
API controlled standby mode allows the matrix to enter a low power state when not in use, cutting power consumption by up to 34%
Mirrored HDMI output allows connection of a local AVR, local screen or additional display over distance via an HDBaseT extender or hybrid optical HDMI cable
API triggered A/V mute allows a signal to be deactivated to any zone
4x PoH receivers included – a complete kit for quicker, easier and more reliable installation and AV distribution straight out of the box
Can be combined with WyreStorm EXP-CON-DAC-D digital audio converter to downmix Dolby Digital 5.1 content to mix stereo and surround sound zones
SmartEDID removes conflict when mixing 1080p & 4K displays by dynamically detecting display/source capabilities and automatically requesting the highest possible resolution for all displays
Additional EDID management through DIP switches for global setting or via WebUI for independent management of EDID per source
Central RS-232 control compatible major third party control systems with full integration protocols available for Crestron, AMX, RTI & Control4
Embedded WebUI allows installer setup and configuration and provides switching interface

ADDITIONAL FEATURES ON RECEIVERS

2x RXV-35-SCL scales 4K UHD content to 1080p displays
2x RXV-35-4K outputting HDMI content at up to 2160p 4:4:4/60
Low profile chassis for quick, easy and flush installations
Multichannel audio supports 7.1 DTS:X and Dolby Atmos
Additional power connectivity via threaded bushings for both standard and locking DC power plugs
LED indication for visual power supply to receiver via PoH or mains, signal status to show established connection to display, HDBaseT link to matrix and HDCP confirmation to illustrate the presence of encryption within a signal

The post MXV-0404-H2A-KIT appeared first on Wave Electronics Systems.