Wyrestorm » Matrix Switchers » Modular Matrix » Wave Electronics Systems

MX-1616-H2XC

admin — Wed, 31 May 2023 00:35:34 +0000

Because the H2X platform packs such a big punch with its standalone version, it wouldn’t be sensible to not offer a modular version. Much like the 2K 16×16 modular matrix, WyreStorm takes custom AV distribution and control to new heights with the H2XC platform.

The H2XC platform gives integrators the utmost in switching and flexibility; for large projects that demand the latest in 4K HDR technology, while giving the integrator the freedom to choose exactly what goes into its chassis, making a perfect fit for the install. Fully utilizing the matrix, not your wallet.

AUDIO & VIDEO

Inputs

Up to 16x HDMI In: 19-pin type A
Up to 16x HDBaseT In 8-pin RJ-45 female
Up to 16x S/PDIF In Coaxial Digital

Outputs

Up to 16x HDBaseT Out 8-pin RJ-45 female
Up to 16x HDMI Out 19-pin type A (Mirrors HDBaseT)
Up to 16x Optical Out: SFP+
Up to 16x S/PDIF Out Coaxial Digital
Up to 16x Audio Out 3pin Phoenix Connector

Output Video Encoding

HDBaseT Class A 5-Play

Encoding Data Rate

9.2Bbps

End to End Latency

10µs (micro seconds)

Audio Formats

S/PDIF: 2ch PCM | Multichannel: Up to 5.1 DTS and Dolby Digital
HDMI: 2ch PCM | Multichannel: LPCM and Up to DTS-X and Dolby Atmos

Video Resolution (Max)

1920x1080p @60Hz 12bit
1920x1200p @60Hz 16bit
3840x2160p @24Hz 10bit 4:2:0 HDR
3840x2160p @30Hz 8bit 4:4:4
3840x2160p @24Hz 10/12bit HDR 4:2:0
4096x2160p @60Hz 8bit 4:2:0
4096x2160p @60Hz 8bit 4:4:4

Long Cable Mode Forced Resolution:
1920x1080p @60Hz 12bit

Supported Standards

DCI | RGB | HDR | HDR10 | Dolby Vision | HLG | BT.2020 | BT.2100

Maximum Pixel Clock

HDMI: 600mHz | HDBaseT: 297MHz

AUDIO & VIDEO

Maximum Pixel Clock

150Mhz

COMMUNICATION & CONTROL

HDMI

HDMI | HDCP 2.2 | EDID | DVI/D supported with adapter (not included)

HDBaseT

Ethernet

1x 8-pin RJ-45 female | Web UI | IP Control | Bidirectional over HDBaseT

1x IR Ext – 3.5mm (1/8in) TRS Stereo | Matrix Control10x IR RX – 3.5mm (1/8in) TRS Stereo | 10x IR TX – 3.5mm (1/8in) TS MonoTransmits to Over HDBaseT

RS-232

Bidirectional over HDBaseT | Matrix Control | Firmware Updates

Audio Return Channel
(ARC)

Supported

POWER

Power Supply

100~240V AC 50/60Hz

PoH

48V | Each HDBT Outputs: 15.4W | All Outputs: 95W

Max Power Consumption

Default Configuration: 200W

Note: Power Consumption increases by +11W for each optional TX-H2X-HDBT card installed. Max of 6 TX-H2X-HDBT cards can be used within a single matrix when using PoH.

Additional Features

Populate with personal selection of multi-format transmission card options including:
HDBaseT output supporting 4K/60 4:4:4 or 12-bit HDR to 70m/230ft and 1080p to 140m/459ft
Fiber output supporting 4K/60 4:4:4 or 12-bit HDR to 300m/984ft
16-slot 4K UHD matrix switcher featuring 16 inputs and 16 switchable zone outputs with integrated audio matrixing
Modular platform with 4 modular card options including HDBaseT input and OM3 fiber transmission
18Gb/s backplane for support of HDMI2.0 video standard
Supports HDR-10 HLG and Dolby Vision HDR content
Integrated audio matrix supports up to 48 audio inputs: HDMI de-embed, S/PDIF in and Audio Return
Audio DSP allows adjustment of volume, EQ and delay for every audio zone
Audio zone can follow video output or be run independently for full audio matrix flexibility
AVR Priority mode for all HDMI and HDBaseT outputs – dynamically manages requirement for multi-channel audio when it’s needed
API generated control of displays via RS-232 or CEC
CEC power triggering for all HDMI and HDBaseT outputs
Source restriction of any source to any zone
Built-in diagnostic to monitor system and transmission performance
Delivers PoH to every HDBaseT zone, powering receivers
Accessory devices to build large system infrastructures
QuickSync technology for near instant switching
SmartEDID feature dynamically solves mixed resolution conflicts when combining 2K/4K screens in the same installation

The post MX-1616-H2XC appeared first on Wave Electronics Systems.

TX-H2X-ADZ

admin — Tue, 30 May 2023 04:30:53 +0000

Offering both an HDMI input & output, the ADZ card provides an 18Gbps link direct to the matrix backplane. Supporting both 2160p 4:4:4 8-bit & HDR content and multi-channel audio formats up to Dolby Atmos, it offers the ability to use native HDMI connectivity without the need for a transmission port (reducing cost) and maintains an audio DSP output. It is the perfect partner for WyreStorm’s range of hybrid optical fiber HDMI cables.

AUDIO & VIDEO

Inputs

1x HDMI In: 19-pin type A
1x S/PDIF In: S/PDIF Coaxial Digital

Outputs

1x HDMI Out: 19-pin type A
1x Audio Out: 3-pin Terminal Block – 3.5mm
1x S/PDIF Out: S/PDIF Coaxial Digital

Audio Formats

S/PDIF: 2ch PCM | Multichannel: Up to 5.1 DTS and Dolby Digital
HDMI: 2ch PCM | Multichannel: LPCM and Up to DTS-X and Dolby Atmos

Video Resolution (Max)

1920x1080p @60Hz 16bit
3840x2160p @30Hz 8bit 4:4:4
3840x2160p @60Hz 10bit 4:2:0 HDR
4096x2150p @60Hz 8bit 4:4:4

Maximum Pixel Clock

HDMI: 600mHz

COMMUNICATION & CONTROL

HDMI

HDCP 2.2 | EDID | DVI-D supported with adapter (not included)

CEC

CEC power triggering | Requires CEC compatibility

POWER

Power Supply

Internal to Matrix

Max Power Consumption

Matrix Dependent

18Gbps HDMI input to matrix backplane
Switched HDMI output capable of 2160p 4:4:4 and HDR @ 60Hz
Audio zone output: analog stereo pre-out with mirrored S/PDIF output
Separate S/PDIF input for additional audio source
Adds additional audio zone + DSP to an H2XC chassis
Supports 4K/60 4:4:4 or RGB content
Compatible with all HDR standards such as HDR-10, HLG and Dolby Vision
Passes all audio formats including DTS:X and Dolby Atmos
Cost-effective pure HDMI card aligns perfectly with WyreStorm Active Optical HDMI cables

The post TX-H2X-ADZ appeared first on Wave Electronics Systems.

TX-H2X-VLC

admin — Tue, 30 May 2023 04:30:53 +0000

Experience HDBaseT transmission turned up to 11 with WyreStorm’s new 18Gbps HDMI solution. Never one to shy away from embracing new technology, we’ve been sending lossless native 24Hz HDR-10 content over HDBaseT since 2016. Now though, content is going above the capability of HDBaseT with HFR (High Frame Rate) HDR here already in the form of Blu-Ray, Satellite & Cable (HLG) and gaming content. WyreStorm’s H2X matrix is ready for this with our new light-compression transmission solution.

AUDIO & VIDEO

Inputs

1x HDMI In: 19-pin type A
1x S/PDIF In: S/PDIF Coaxial Digital

Outputs

1x Optical Out: SFP+
1x S/PDIF Out: S/PDIF Coaxial Digital
1x Audio Out: 3-pin Phoenix

Video Encoding

HDBaseT Class A

Encoding Data Rate

9.2Gbps

Audio Formats

S/PDIF: 2ch PCM | Multichannel: Up to 5.1 DTS and Dolby Digital
HDMI: 2ch PCM | Multichannel: LPCM and Up to DTS-X and Dolby Atmos

Video Resolution (Max)

1920x1080p @60Hz 16bit
3840x2160p @30Hz 8bit 4:4:4
3840x2160p @60Hz 10bit 4:2:0 HDR
4096x2150p @60Hz 8bit 4:4:4

Maximum Pixel Clock

HDMI: 600mHz | HDBaseT: 297MHz

COMMUNICATION & CONTROL

HDMI

HDCP 2.2 | EDID | DVI-D supported with adapter (not included)

HDBaseT

1x IR RX 3.5mm (1/8in) TRS Stereo | To Receiver over HDBaseT

RS-232

From Matrix – No Connection on card | Bidirectional over HDBaseT

Ethernet

From Matrix – No Connection on card | Bidirectional over HDBaseT

Audio Return Channel
(ARC)

Supported

POWER

Power Supply

Internal to Matrix

Max Power Consumption

Matrix Dependent

Use only with RXV-70-4K for 70m/230ft transmission of 2160p 4:4:4/60. Not compatible with RXV-70-4K-G2 model

18Gbps HDMI input
Visually Lossless Compression HDBaseT Output – Transmitting the full 18Gbps bandwidth that the current version of HDMI is capable of producing, which includes video, audio, control and power up to 70m/230ft of 2160p 4:4:4/60 and 100m/328ft of 1080p using VLC light-compression technology
Stereo Audio Output – Offering stereo audio breakout of a zone with a 3-pin phoenix connector for analog audio
S/PDIF output supporting 5.1 audio content de-embedded from sources or ARC from connected zones
S/PDIF Audio Input – Another way to inject digital audio to take advantage of the H2X platform’s powerful audio matrix and DSP.
IR RX – Allows control signals to be sent to the sink device

The post TX-H2X-VLC appeared first on Wave Electronics Systems.

TX-H2X-HDBT

admin — Tue, 30 May 2023 04:30:53 +0000

De-centralize sources connected to the H2X matrix platform with this HDBaseT input & output card. Accepting 4K UHD transmissions from 70m/230ft, this modular card allows source devices to be kept in-suit while making them part of the main distribution system.

AUDIO & VIDEO

Inputs

1x HDMI In19-pin type A
1x S/PDIF In Coaxial Digital
1x HDBaseT 8-pin RJ-45 female

Outputs

1x HDBaseT 8-pin RJ-45 female
1x S/PDIF Out Coaxial Digital
1x Audio Out 3pin Phoenix Connector

Video Encoding

HDBaseT Class A

Encoding Data Rate

9.2Gbps

Audio Formats

2ch PCM | Multichannel: LPCM and Up to DTS-X and Dolby Atmos

Video Resolution (Max)

1920x1080p @60Hz 16bit
3840x2160p @30Hz 8bit 4:4:4
3840x2160p @60Hz 10bit 4:2:0 HDR
4096x2150p @60Hz 8bit 4:4:4

Maximum Pixel Clock

HDMI: 600mHz | HDBaseT: 297MHz

COMMUNICATION & CONTROL

HDMI

HDCP 2.2 | DVI-D supported with adapter (not included)

HDBaseT

HDMI | HDCP 2.2 | 1-way PoH to Receiver | IR RX to Receiver

1x IR RX 3.5mm (1/8in) TRS Stereo | To Receiver over HDBaseT

RS-232

Matrix Control | Bidirectional over HDBaseT | Firmware Updates

Ethernet

From Matrix – No Connection on card | Bidirectional over HDBaseT

Audio Return Channel
(ARC)

Supported

POWER

Power Supply

Internal to Matrix

Max Power Consumption

Matrix Dependent

HDBaseT Input – enables the direct connection of a remote source to the matrix via an HDBaseT Transmitter only at the source location, rather than an HDBaseT extender set previously required to distribute a remote signal over distance to a matrix. The matrix will then route the remote source signal as it does with any locally connected source
HDBaseT Output – transmitting Class A HDBaseT which includes video, audio, control and power up to 70m/230ft of 4K and 100m/328ft of 1080p
HDMI Output – mirrored to HDBaseT to allow additional connection of a local display device, AVR or to extend with a hybrid active optical HDMI cable (HAOC)
Stereo Audio Output – offering stereo audio breakout of a zone with a 3-pin phoenix connector for analog audio
S/PDIF output supporting 5.1 audio content de-embedded from sources or ARC from connected zones
S/PDIF Audio Input – another way to inject digital audio to take advantage of the H2X platform’s powerful audio matrix and DSP.
IR RX – allows control signals to be sent to the sink device

The post TX-H2X-HDBT appeared first on Wave Electronics Systems.

TX-H2X-OM3

admin — Tue, 30 May 2023 04:30:53 +0000

With fiber optic cable now more accessible than ever, there’s never been a better time to ‘see the light’ and send the highest possible bandwidth that currently exists (according to the HDMI 2.0 specification) over distances up to 300m/984ft. Attenuation and airborne interference are no longer a concern for HDMI content so, go long!

AUDIO & VIDEO

Inputs

1x HDMI In: 19-pin type A
1x S/PDIF In: S/PDIF Coaxial Digital

Outputs

1x HDMI Out: 19-pin type A
1x Optical Out: SFP+
1x S/PDIF Out: S/PDIF Coaxial Digital
1x Audio Out: 3-pin Phoenix

Video Encoding

TMDS over fiber

Encoding Data Rate

10Gbps

Audio Formats

S/PDIF: 2ch PCM | Multichannel: Up to 5.1 DTS and Dolby Digital
HDMI: 2ch PCM | Multichannel: LPCM and Up to DTS-X and Dolby Atmos

Video Resolution (Max)

1920x1080p @60Hz 16bit
3840x2160p @30Hz 8bit 4:4:4
3840x2160p @60Hz 10bit 4:2:0 HDR
4096x2150p @60Hz 8bit 4:4:4

Maximum Pixel Clock

600MHz

COMMUNICATION & CONTROL

HDMI

HDCP 2.2 | EDID | DVI-D supported with adapter (not included)

1x IR RX 3.5mm (1/8in) TRS Stereo | Bidirectional over OM3

RS-232

From Matrix – No Connection on card | Bidirectional over OM3

Fiber Multimode

HDMI | HDCP 2.2 | EDID | Bidirectional IR/RS-232

POWER

Power Supply

Internal to Matrix

Max Power Consumption

Matrix Dependent

18Gbps HDMI input
Optical OM3 Output – Transmitting the full 18Gbps bandwidth that the current version of HDMI is capable of producing, which includes video, audio, control and power up to and astonishing 300m/984ft of 2160p 4:4:4/60 and 100m/328ft of 1080p over fiber optic cable
HDMI Output – Mirrored to Fiber output to allow additional connection of a local display device, AVR or to extend with a hybrid active optical HDMI cable (HAOC)
Stereo Audio Output – Offering stereo audio breakout of a zone with a 3-pin phoenix connector for analog audio
S/PDIF output supporting 5.1 audio content de-embedded from sources or ARC from connected zones
S/PDIF Audio Input – Another way to inject digital audio to take advantage of the H2X platform’s powerful audio matrix and DSP
IR RX – Allows control signals to be sent to the sink device

The post TX-H2X-OM3 appeared first on Wave Electronics Systems.

TX-H2X-HDMI

admin — Tue, 30 May 2023 04:30:53 +0000

The standard transmission card found in the H2X platform, the TX-H2X-HDMI transmits 4K UHD signals from 70m/230ft over its Class A HDBaseT output and features an HDMI output that mirrors HDBaseT. The HDMI output is perfect for connecting to a local monitor, AVR, or signal extension via extender product or one of WyreStorm’s Hybrid Active Optical Cables (HAOC).

AUDIO & VIDEO

Inputs

1x HDMI In: 19-pin type A
1x HDMI Out: 19-pin type A
1x S/PDIF In: S/PDIF Coaxial Digital

Outputs

1x HDBaseT Out: 8-pin RJ-45 female
1x S/PDIF Out: S/PDIF Coaxial Digital
1x Audio Out: 3-pin Phoenix

Video Encoding

HDBaseT Class A

End to End Latency

10μs (micro seconds)

Audio Formats

S/PDIF: 2ch PCM | Multichannel: Up to 5.1 DTS and Dolby Digital
HDMI: 2ch PCM | Multichannel: LPCM and Up to DTS-X and Dolby Atmos

Video Resolution (Max)

1920x1080p @60Hz 16bit
3840x2160p @30Hz 8bit 4:4:4
3840x2160p @60Hz 10bit 4:2:0 HDR
4096x2160p @60Hz 8bit 4:4:4

Maximum Pixel Clock

HDMI: 600MHz | HDBaseT: 297MHz

COMMUNICATION & CONTROL

HDMI

HDCP 2.2 | EDID | DVI-D supported with adapter (not included)

HDBaseT

HDMI | HDCP 2.2 | EDID | 1-way PoH to Receiver | IR RX to Receiver

1x IR RX 3.5mm (1/8in) TRS Stereo | To Receiver over HDBaseT

RS-232

From Matrix – No Connection on card | Bidirectional over HDBaseT

Ethernet

From Matrix – No Connection on card | Bidirectional over HDBaseT

Audio Return Channel
(ARC)

Supported

POWER

Power Supply

Internal to Matrix

Max Power Consumption

Matrix Dependent

18Gbps HDMI input
HDBaseT Output – transmitting Class A HDBaseT which includes video, audio, control and power up to 70m/230ft of 4K and 100m/328ft of 1080p
HDMI Output – mirrored to HDBaseT to allow additional connection of a local display device, AVR or to extend with a hybrid active optical HDMI cable (HAOC)
Stereo Audio Output – offering stereo audio breakout of a zone with a 3-pin phoenix connector for analog audio
S/PDIF output supporting 5.1 audio content de-embedded from sources or ARC from connected zones
S/PDIF Audio Input – another way to inject digital audio to take advantage of the H2X platform’s powerful audio matrix and DSP.
IR RX – allows control signals to be sent to the sink device

The post TX-H2X-HDMI appeared first on Wave Electronics Systems.