LUTRON HOMEWORKS QS PRO LED+ PHASE ADAPTIVE POWER MODULE

LUT-LQSE-4A5-230-D

Lutron’s HomeWorks QS PRO LED+ Phase Adaptive Power Module is a 4 zone DIN power module for phase control dimming of lighting loads.

Lutron’s HomeWorks QS PRO LED+ Phase Adaptive Power Module is a 4 zone DIN power module for phase control dimming of lighting loads.

It includes QS link for seamless integration of lights and controls.

An auto-detect mode is available to detect and configure forward phase or reverse phase (leading edge or trailing edge) dimming for incandescent / halogen, electronic / magnetic low voltage
and neon / cold cathode light sources. A locked forward phase or reverse phase (leading edge or trailing edge) mode is available.

It controls dimmable LED loads. 

FEATURES

  • No minimum load requirement
  • RTISS technology compensates for incoming mains voltage variations such as changes in Root Mean Square (RMS) voltage, frequency shifts (up to ± 2% change in frequency /second),  harmonics and line noise
  • RTISS-TE technology allows for true instantaneous voltage compensation for incoming mains voltage variations. Only operates in reverse phase (trailing edge) when “voltage comp.” is enabled 
  • RTISS-ICM technology is able to withstand high inrush LEDs, bulb blowouts and direct shorts
  • Provides air gap off (when all zones are off)
  • Integral protection for common temporary over current and over voltage conditions
  • LEDs on the module provide diagnostic information
  • Buttons on the module provide override control
  • Manual Override contact closure input (CCI)
  • Power failure memory automatically returns the outputs to the levels they were set to prior to a power outage

SPECIFICATIONS

Power 220 to 240V~ 50/60Hz
10 A maximum total input current.
Standby power 3.5W typical
Lightning strike protection meets ANSI/IEEE standard 62.31-1980
Can withstand voltage surges of up to 6000V and current surges of up to 3000A
Contact Lutron for applications where the electrical distribution system does not have a connection to earth, an IT network per IEC 60364, such as an ungrounded Delta feed
Regulatory Approvals Lutron Quality Systems registered to ISO 9001.2015
RoHS Compliant
CE marked
UKCA marked
Rated for 150 W of LEDi per IEC 60669
Environment See Mounting on page 6 of the product specification sheet for thermal specifications.
Relative humidity: less than 90% non-condensing.
For indoor use only.
Output Zone Ratings
Load Type Zone 1 Rating Zone 1,2 and 4 Rating (per Zone)
LED 1.7A (400W) 1A (250W
Incandescent / Halogen, ELV 1200W 800W
Neon/Cold Cathode 800VA (525W) 500VA (375W)
Terminals Torque – 0.6Nm (5in-lbs)
Power terminal

0.25mm2 to 2.5mm2 (22AWG to 12 AWG) single wire, solid or stranded

0.25mm2 to 1mm2 (22AWG to 18 AWG) two wires, solid or stranded

Data terminal – 1 pair, twisted  and screened

0.25mm2 to 2.5mm2 (22AWG to 12 AWG) single wire, solid or stranded

0.25mm2 to 1mm2 (22AWG to 18 AWG) two wires, solid or stranded

Dimension Height: 90mm / 3.54″
Width:  216mm / 8.50″
Depth: 76mm /  2.99″

Share

Cables

We use cookies to improve your experience on our site. By continuing to browse our site, you agree to the use of cookies. For more information, please see our privacy policy.