LUTRON HOMEWORKS UNIVERSAL DALI® POWER MODULE

The DALI® Power Module unit is a DALI-2® certified DIN-rail mounted single master application controller for use with DALI®-compliant digital addressable loads in HomeWorks QSX systems. It provides DALI® bus power and control for two independent DALI® buses with up to 64 DALI®-compliant, digital addressable loads on each bus.

The DALI® Power Module unit is a DALI-2® certified DIN rail mounted single master application controller for use with DALI®-compliant digital addressable loads in HomeWorks QSX systems. It provides DALI® bus power and control for two independent DALI® buses with up to 64 DALI® compliant, digital addressable loads on each bus.

The Lutron HomeWorks Universal DALI® Power Module is DALI-2® certified by the Digital Illumination Interface Alliance® (DiiA®). In order to ensure compatibility with Lutron DALI® controllers, the connected DALI® LED drivers and fluorescent ballasts must be DALI-2® certified and marked.

In addition to compatibility, it is important to select high quality and high performance LED drivers and fluorescent ballasts. DALI-2® certified devices are readily available from many manufacturers and are tested for compatibility with the standard. For a complete list of available DALI-2® certified devices, see the DiiA® website at https://www.digitalilluminationinterface.org/products. DALI® devices that are not listed on the DiiA® website and are not marked DALI-2® cannot be considered DALI-2® certified. 

The DALI® version 1 standard does not ensure compatibility. To apply the original DALI® version 1 mark on LED drivers and fluorescent ballasts, no verification of the test results was required, and manufacturers could self-declare compliance and apply the DALI® mark

If you would like to use an LED driver or fluorescent ballast that is not DALI-2® certified but carries a DALI® version 1 logo, Lutron recommends that these devices be tested to ensure compatibility. Lutron is able to perform this testing on request. Samples of the drivers and light engines must be submitted to Lutron and the expected turnaround time is 6 to 8 weeks after the drivers are received. Fees for testing may apply.

Lutron recommends that this testing be performed before the fixtures and lighting controls are purchased and installed. Contact the Team at Habitech on 01256 638500 for more information.

FEATURES

• DALI® Single master application controller • Provides power for two buses of DALI®-compliant, digital addressable loads – 128 mA guaranteed current – 250 mA maximum supply current per bus
• Supports up to 64 DALI® compliant loads on each bus, which can be addressed into 64 Lutron zones 
• Two DALI® buses per DALI® Power Module, totalling up to 128 DALI® compliant loads per module and 128 Lutron zones per DALI® Power Module
• Dynamic DALI® Group Allocation automatically and intelligently assigns zones to DALI® groups to maximize dimming performance and minimize asynchronous behaviour of loads within a zone
• Supports DALI® Type 8 tuneable white colour temperature (tc) applications – IEC 62386-209 ed.1
• DALI® type 8 loads and other DALI® extended types can be mixed on the same DALI® bus
• Supports smooth, continuous fading for up to 4 hours for both colour temperature* and intensity
• Simultaneous control of colour and intensity with independent fade times
• Provides perceived linear control of intensity
• Includes QS control link for seamless integration of lights in an Athena system
• Field configurable system failure level, min and max levels and fade time
• Power failure memory retains control unit programming in the event of power loss
• Light levels remain unchanged during firmware update

SPECIFICATIONS