MX-0404-KIT

4K 4×4 HDBaseT™ Matrix with Receivers

An established leader in AV matrix solutions, WyreStorm packs a wealth of experience into this powerful yet compact 1U chassis. Offering transmission of HDMI content up to 4K UHD & HDR content to 35m/115ft, pairing HDBaseT with WyreStorm’s powerful crosspoint HDMI switching chipset. The MX-0404-KIT has 3 HDBaseT zone outputs with PoH and a single switched HDMI output which can be paired with WyreStorm’s HAOC hybrid optical HDMI cables or any extender for transmission via HDBaseT or OM3 fiber. The MX-0404-KIT doesn’t stop there, offering zone audio breakout via S/PDIF, CEC triggering for all connected screens and the A/V mute function enhances the offering for the modern home or commercial installation.

AUDIO & VIDEO

Inputs

4x HDMI In: 19-pin type A

Outputs

4x S/PDIF Out: RCA Female
3x HDBT Out: 8-pin RJ-45 Female
1x HDMI Out: 19-pin type A

Video Encoding

HDBaseT™ Class B

Encoding Data Rate

9.2Gbps

End to End Latency

10μs (micro seconds)

Audio Formats

HDMI/HDBaseT: 2ch LPCM | Multichannel up to Dolby Atmos and DTS-X
S/PDIF: 2ch LPCM | Dolby Digital/DTS up to 5.1ch
Analog: 2ch Analog

Video Resolution (Max)

1920x1080p @60Hz 16bit
3840x2160p @60Hz 8bit 4:2:0

Supported Standards

DCI (4096×2160) | RGB | HDR | HDR10 | Dolby Vision up to 30Hz | HLG | BT.2020 | BT.2100

Maximum Pixel Clock

HDBaseT: 340MHz

COMMUNICATION & CONTROL

HDMI

HDMI 2.0 | HDCP 2.2 | EDID | CEC | DVI/D supported with adapter (not included)

HDBaseT

HDMI 2.0 | HDCP 2.2 | EDID | CEC | 1-way PoH | Bidirectional IR

CEC

CEC power triggering for connected screens – Requires CEC compatibility

IR

3x IR RX: 3.5mm (1/8in) TRS Stereo
4x IR TX: 3.5mm (1/8in) TS Mono
Bidirectional over HDBaseT

RS-232

1x RS-232: 9-pin DB9 Female

Ethernet

1x LAN: 8-pin RJ-45 Female

POWER

Power Supply

100~240V AC 50/60Hz

Max Power Consumption

48.2W

ADDITIONAL FEATURES

  • HDBaseT enables 60Hz 4K UHD content (8-bit) to be sent over HDBaseT to 35m/115ft
  • Compatible with DVI-I and DP++ v1.3 signals from compatible devices
  • 4 audio outputs allow audio to be independently de-embedded from outputs via S/PDIF coaxial
  • SmartEDID feature also dynamically detects display/source capabilities and automatically outputs the highest possible resolution
  • Additional EDID management through DIP switches for global setting or via WebUI for independent management of EDID per source
  • Embedded WyreStorm WebUI enables simple source switching and installer set-up & configuration
  • WebUI includes full EDID management to read, copy, store or import EDID from connected devices
  • Assign a different EDID to each connected source device
  • API triggered standby mode puts unit into low power state during downtime
  • Flexible control options – front panel buttons, infrared remote control, local IR, RS-232, Telnet or WebUI
  • 3.5mm jack input for receiving local IR commands out of line-of-sight
  • 2-way IR for far-end device control from control system or source control from a zone

Share

Cables

We use cookies to improve your experience on our site. By continuing to browse our site, you agree to the use of cookies. For more information, please see our privacy policy.