MX-1616-H2XC

Inputs

Up to 16x HDMI In: 19-pin type A
Up to 16x HDBaseT™ In 8-pin RJ-45 female
Up to 16x S/PDIF In Coaxial Digital

Outputs

Up to 16x HDBaseT Out 8-pin RJ-45 female
Up to 16x HDMI Out 19-pin type A (Mirrors HDBaseT™)
Up to 16x Optical Out: SFP+
Up to 16x S/PDIF Out Coaxial Digital
Up to 16x Audio Out 3pin Phoenix Connector

Output Video Encoding

HDBaseT™ Class A 5-Play

End to End Latency

10µs (micro seconds)

Audio Formats

S/PDIF: 2ch PCM | Multichannel: Up to 5.1 DTS and Dolby Digital
HDMI: 2ch PCM | Multichannel: LPCM and Up to DTS-X and Dolby Atmos

Video Resolution (Max)

1920x1080p @60Hz 12bit
1920x1200p @60Hz 16bit
3840x2160p @24Hz 10bit 4:2:0 HDR
3840x2160p @30Hz 8bit 4:4:4
3840x2160p @24Hz 10/12bit HDR 4:2:0
4096x2160p @60Hz 8bit 4:2:0
4096x2160p @60Hz 8bit 4:4:4

Long Cable Mode Forced Resolution:
1920x1080p @60Hz 12bit

Supported Standards

DCI | RGB | HDR | HDR10 | Dolby Vision | HLG | BT.2020 | BT.2100

HDMI

HDMI | HDCP 2.2 | EDID | DVI/D supported with adapter (not included)

HDBaseT

HDMI | HDCP 2.2 | EDID | ARC | 1-way PoH to Receiver | Bidirectional IR and Ethernet

Ethernet

1x 8-pin RJ-45 female | Web UI | IP Control | Bidirectional over HDBaseT™

IR

1x IR Ext – 3.5mm (1/8in) TRS Stereo | Matrix Control10x IR RX – 3.5mm (1/8in) TRS Stereo | 10x IR TX – 3.5mm (1/8in) TS MonoTransmits to Over HDBaseT™

RS-232

Bidirectional over HDBaseT | Matrix Control | Firmware Updates

Audio Return Channel
(ARC)

Supported

Power Supply

100~240V AC 50/60Hz

PoH

48V | Each HDBT Outputs: 15.4W | All Outputs: 95W

Max Power Consumption

Default Configuration: 200W

Note: Power Consumption increases by +11W for each optional TX-H2X-HDBT card installed. Max of 6 TX-H2X-HDBT cards can be used within a single matrix when using PoH.

• Populate with personal selection of multi-format transmission card options including:
• HDBaseT™ output supporting 4K/60 4:4:4 or 12-bit HDR to 70m/230ft and 1080p to 140m/459ft
• Fiber output supporting 4K/60 4:4:4 or 12-bit HDR to 300m/984ft
• 16-slot 4K UHD matrix switcher featuring 16 inputs and 16 switchable zone outputs with integrated audio matrixing
• Modular platform with 4 modular card options including HDBaseT input and OM3 fiber transmission
• 18Gb/s backplane for support of HDMI2.0 video standard
• Supports HDR-10 HLG and Dolby Vision™ HDR content
• Integrated audio matrix supports up to 48 audio inputs: HDMI de-embed, S/PDIF in and Audio Return
• Audio DSP allows adjustment of volume, EQ and delay for every audio zone
• Audio zone can follow video output or be run independently for full audio matrix flexibility
• AVR Priority mode for all HDMI and HDBaseT outputs – dynamically manages requirement for multi-channel audio when it’s needed
• API generated control of displays via RS-232 or CEC
• CEC power triggering for all HDMI and HDBaseT outputs
• Source restriction of any source to any zone
• Built-in diagnostic to monitor system and transmission performance
• Delivers PoH to every HDBaseT zone, powering receivers
• Accessory devices to build large system infrastructures
• QuickSync™ technology for near instant switching
• SmartEDID™ feature dynamically solves mixed resolution conflicts when combining 2K/4K screens in the same installation