NHD-400-E-TX

NetworkHD™ 400 Series 4K AV over IP JPEG 2000 Encoder

The NHD-400-E-TX encoder offers stunning 4K HDR video, multichannel audio support and 4K/2K scaling to seamlessly handle mixed resolution HDMI sources for matrix and video wall functionality. The reduced cost Type E version removes some control ports but retains the 400 Series core features. Featuring incredible low latency the 400 Series is the ideal AV over IP solution for systems where high quality and low delay are key requirements, making it perfect for demanding commercial applications.

The NHD-400-E-TX JPEG 2000 encoder is intended for use with any 400 Series JPEG 2000 decoder (sold seperately) to provide a complete end-to-end video distribution system. When used in conjunction with the NHD-000-CTL system controller complete control integration is quick and simple.

AUDIO AND VIDEO

Inputs

1x 19-pin HDMI Type A

Outputs

1x 8-pin RJ-45

Audio Formats

2ch LPCM | Multichannel: LPCM and Up to DTS-X and Dolby Atmos

Output Video Encoding

JPEG 2000

Encoding Data Rate

Max: 850Mbps

End to End Latency (Max)

1 video frame latency (pass-through mode) 16ms @60fps 2 video frames latency (scaler/VW mode) 33ms @60fps

Video Resolutions (Max)

3840x2160p @60Hz 8bit 4:2:0

Supported Standards

HDR10 | HLG | BT.2020

Maximum Pixel Clock

300MHz

COMMUNICATION AND CONTROL

HDMI

HDCP 2.2 | CEC

Ethernet

1x LAN (PoE): 8-pin RJ-45 ANSI/TIA-568 8P8C, 1000Base-T, PoE PD (IEEE 802.3af)

RS-232

1x RS-232: 4-pin Phoenix | 2 Way (RX only) | Routed | API Programmable

POWER

Power Supply

12V DC 1A

PoE

IEEE 802.3af (15.4W at PSE)

Max Power Consumption

8W (with PSU)

Additional Features

Uses security protocols such as SSH, HTTPS and AES to encrypt data and prevent unauthorized access
Stunning visually lossless 4K UHD HDMI video with HDR over 1GbE / IP networks
Ultra-low end-to-end latency – only a single video frame (16ms at 60fps)
Multi-channel audio including DTS:X & Dolby ATMOS supported over HDMI
Image scaling with 400 Series decoders – use a mix of 4K & 1080p displays throughout an installation
Easy network set-up using standard Layer 2 or Layer 3 managed switches
Hugely scalable I/O, utilizing multicast technology
Live video unicast preview streams for use with NetworkHD Touch or a custom control UI
Powerful audio matrix functionality – route audio separately from video to any decoder
400 Series supports up to 16×16 video walls with image scaling, bezel compensation and rotation
400 Series supports custom “No Source” idle image upload for branded down time
Support all SD, HD and UHD video formats – including interlaced content
Batch firmware update and batch settings functions offers a massive reduction on installation times
Custom EDID management with import/export
HDCP 2.2 Compliant
IEEE 802.3af PoE compliant PD
Compatible with NHD-000-RACK4 rack mounting kit (brackets included with encoder)