NHD-400-TX

Inputs

1x HDMI

Audio Formats

2ch PCM | Multichannel: LPCM and Up to DTS-X and Dolby Atmos

Output Video Encoding

JPEG 2000

End to End Latency (Max)

1 video frame latency (pass-through mode) 16ms @60fps 2 video frames latency (scaler/VW mode) 33ms @60fps

Video Resolutions (Max)

1920x1080p @60Hz 12bit 4:4:4/RGB
3840x2160p @30Hz 12bit 4:2:2 HDR10 HLG
3840x2160p @30Hz 8bit 4:4:4/RGB
3840x2160p @60Hz 8bit 4:2:0

HDMI

HDCP 2.2 | CEC

Ethernet

1x 1GbE 8-pin RJ-45

USB

1x USB Host: USB Type B | Power: 5v 500ma per port | Data Rate: Max 9MB/s

IR

1x IR TX: 3.5mm (1/8in) TS Mono Jack | 1x IR RX: 3.5mm (1/8in) TRS Stereo Jack | Bidirectional Over Ethernet

RS-232

1x RS-232: 4-pin Phoenix | 2 Way (RX only)

Power Supply

12V DC 1A

PoE

IEEE 802.3af (15.4W at PSE)

Max Power Consumption

8W (with PSU)

Additional Features

• Uses security protocols such as SSH, HTTPS and AES to encrypt data and prevent unauthorized access
• Stunning visually lossless 4K UHD video with HDR over 1GbE / IP networks
• Ultra-low end-to-end latency – only a single video frame (16ms at 60fps)
• Multi-channel audio including DTS:X & Dolby ATMOS
• Image scaling – use a mix of 4K & 1080p displays throughout an installation
• Easy network set-up using standard Layer 2 or Layer 3 managed switches
• Hugely scalable I/O, utilizing multicast technology
• Live video unicast preview streams for use with NetworkHD Touch or a custom control UI
• Powerful audio matrix functionality – route audio separately from video to any decoder
• CEC One-Touch Play & Standby, bidirectional IR or RS-232 control of connected devices
• Up to 16×16 video walls with image scaling, bezel compensation and rotation
• Custom “No Source” idle image upload for branded down time
• Support all SD, HD and UHD video formats – including interlaced content
• Breakaway, independent routing of all video, audio, IR, USB and RS-232 streams
• Infrared signal generation direct from an encoder or decoder – supports Hex IR format
• Analog audio de-embed output with volume control
• Batch firmware update and batch settings functions offers a massive reduction on installation times
• Custom EDID management with import/export
• HDCP 2.2 Compliant
• IEEE 802.3af PoE compliant PD
• Includes optional DC power adapter and mounting brackets
• Compatible with NHD-000-RACK4 rack mounting kit (brackets included with encoder)