NHD-500-DNT-TX

NetworkHD™ 500 Series 4K60 4:4:4 JPEG2000 Encoder with Dante Audio

The NHD-500-DNT-TX is part of the powerful NetworkHD 500 series family of products. Capable of encoding up to 4K60 including Dolby Vision, HDR10 and HLG content. The 500 series comes loaded with a number of advanced features such as the flexibility of Ethernet or Fiber as a transport method. Ultra-low latency encoding and incredibly fast matrix switching speeds enhance the experience. Unique to this encoder is an integrated 2 channel Dante & AES67 audio output.

Audio and Video

Inputs/Outputs

1x HDMI In
1x 3.5mm TRS Analog In
1x 5-pin Balanced Analog Out
1x Toslink Digital Out

Maximum Pixel Clock

600Mhz

Max Video Resolutions

4096x2160p @ 60Hz 8bit 4:4:4 or RGB
3840x2160p @ 60Hz 12bit 4:2:2 Dolby Vision
3840x 2160p @ 60Hz 10bit 4:2:2 HDR10/HLG
1920x1080p @60Hz 12bit

Supported Standards

RGB | BT.2020 | BT.709 | DCI | HDR10 | HDR10+ | HLG | Dolby Vision

Audio Formats

Passthrough: 2CH PCM up to DTS:X & Dolby Atmos
ARC: 2CH PCM up to Dolby Digital Plus & DTS 5.1
Dante/AES67: 2CH PCM

Output Video Encoding

JPEG 2000

Encoding Data Rate

Max: 850Mbps (configurable)

End to End Latency

1 video frame latency (pass-through mode) 16ms @ 4K60 | 2 video frames latency (scaler/VW mode)

COMMUNICATION AND CONTROL

HDMI

HDMI 2.0b | HDCP 2.2 | CEC | ARC | EDID

Network

2x 1GbE RJ45 (Dante & main AV out)
1 x 1Gbps SFP
(1000Base-SX: 550m using OM3 MMF)
(1000Base-LX: 5km using SMF)
(1000Base-LX10: 10km using SMF)

RS-232

1x 3-Pin Phoenix Connector | 2-way | API Programmable

1x IR TX 3.5mm TS Mono Jack | API Programmable
1x IR RX 3.5mm TRS Stereo Jack | API Programmable

USB

1x USB 2.0 Type Host
(Up to 300Mbps upstream)

Security Protocols

AES 128 | SSH | TLS | HTTPS

POWER

Power Supply

12V DC 1A | 802.3af PoE Compliant

Power Consumption

Max 15.4 | Average: 8w

Additional Features

Supports multi-channel audio passthrough including DTS:X & Dolby Atmos
Hugely scalable I/O, utilizing multicast technology
CEC One-Touch Play & Standby, bidirectional IR or RS-232 control of connected devices
Custom “No Source” idle image upload for branded down time
Analog audio de-embed output with volume control
Batch firmware update and batch settings functions offers a massive reduction on installation times
Custom EDID management with import/export