The21 SUB WF PRO PASSIVE SEALED

The21 SUB WF PRO PASSIVE SEALED is an application-specific version of our highly regarded The21 SUB PRO PASSIVE SEALED. The WF designation in the model name stands for WaveForming. Use of Trinnov’s WaveForming technology determines not only the number of subwoofers on both the front and rear walls, but their precise locations on each wall, as well. Taking into consideration the locations of the front wall screen channel loudspeakers and the rear wall loudspeakers, the size and shape of the subwoofer cabinets is critical to ensure both location flexibility and realized performance.

When customers experience the unparalleled output and uncolored sound of The21 SUB WF PRO PS, the measured test results we publish translate perfectly to realized performance. ASCENDO’s policy is to be completely transparent and publish measurements done by independently certified third-party labs to provide factual data, thereby enabling informed, educated decisions. The The21 SUB WF PRO PS subwoofer is so far above and beyond the competition in every aspect; refined musicality, tightness, and output levels suitable for a 21″” driver. It is also engineered to operate perfectly in sync (in phase) with our Infrasonic subwoofers; The24 PRO, The32 PRO, The50 PRO, The80 PRO when there is a desire to reproduce movie content below 20Hz with the same authority, precision, and musicality.

Compared to conventional subwoofer motor concepts, the ultra-modern double-gap motor of this custom-made 21″ driver with two outer and two inner voice-coils enables more linear travel and much faster directional changes with higher sound power and significantly lower power compression. SPECIFICATIONS (selection)
Speaker type

21-inch forward-firing, dual gap motor structure with 2 inner and 2 outer voice coiles, neodymium motor.

Xmax

18 mm excursion each direction (36 mm linear), voice coil remaining in homogeneous magnetic field, linear and lowest distortion

Passive | Active

Passive

Recommended amplifiers

1Ch DSP + Amplifier are required. Min. recommended amplifier: 109 Vrms, 154 Vpk, 27,3 A; equivalent to 3000W@4Ω with correct RMS & Peak limiting & compression settings.

Recommended ASCENDO amplifiers

(With additional external 1CH DSP: AIA2-6004), DSP4-10K2 (IS), DSP4-20K2 (IS)

Principle

Sealed

SPL (peak / half space 2 pi)

Calculated data
139 dB @63 Hz peak

Frequency range

Calculated data
55 Hz – 500 Hz / -3 dB
28 Hz – 500 Hz / -15 dB

Efficiency

97 dB / 1W/m

Power handling

4000 W

Impedance

4 Ω

Air volume displacement

2,88 L / in comparison 21″ standard cinema subwoofer 1,76 L

Directivity horizontal x vertical in Deg°

360°

Input Terminal

Neutrik

Enclosure

Internally braced birch ply and MDF

Width

24,02″ I 610 mm

Hight

24,02″ I 610 mm

Hight with feet

25,00″ I 635 mm

Depth without grille

20,39″ I 518 mm

Depth with plug

20,79″ I 528 mm

Weight

94,80 lbs I 43 kg

Finish

Structural paint black

Custom colour options

Piano lacquer, colour of choice, matt or other finishes upon request

Shape customization

Upon request

Mounting

Floor standing with feet

The21 SUB WF PRO PS is supplied with a front cover as standard

Technical modifications subject to change without further notice