NHD-110-RX-S

1080p HD Low Bandwidth H.264/H.265 AV over IP Decoder with Sealoc Protection

The NHD-110-RX-S is an AV decoder to the powerful 110 series of NetworkHD components. This “S” model has been treated with Sealoc’s Weatherloc technology to resist the elements such as water, moisture, humidity, dust, salt-fog, salt-air, acidic products and more. The 110 series components support either H.264 or H.265 video encoding/decoding of up to 1080p60Hz content. The NHD-110-RX can natively process up to a 16×16 video wall to create captivating digital landscapes. The 110 series components are also compatible with the NHD-250-RX multiview receiver allowing up to 9 unique streams to be sent to a single display.

High-Efficiency H.265 encoder, commonly known as MPEG-H Part 2, is a video compression standard developed as part of the MPEG-H project to replace the widely used Advanced Video Coding.

AUDIO & VIDEO

Inputs

1x 8-pin RJ-45 female | 10/100Base-T

Outputs

1 x HDMI 19-pin HDMI type A
1x 3-pin Phoenix Analog Audio
(Both HDMI and Analog outputs allow discrete audio routing from any available NHD-110-TX on the same network.)

Audio Formats

LPCM/MPEG4 AAC stereo, 48KHz

Video Encoding

Primary Stream – H.264/H.265, configurable up to 30Mbps

Video Resolutions (Max)

HDMI: 1920x1080p @60Hz 8bit (15m/50ft)
Cat5e or higher: 1920x1080p @60Hz 8bit (100m/328ft)

End to End Latency

High Quality Mode: ~250msLow Latency Mode: ~80ms

Maximum Pixel Clock

165MHz

COMMUNICATION & CONTROL

HDMI

HDCP 1.4 | EDID | CEC (configurable)

RS-232

1x 3-Pin Phoenix – API controlled from NHD-000-CTL

LAN

1x 8-pin RJ-45 female | 10/100Base-T | PoE 802.1af

IR

1x IR TX: 3.5mm TS Jack Socket
1x IR RX: 3.5mm TS Jack Socket
(IR signals can be bidirectional passthrough or via API commands from NHD-000-CTL for routable IR to discrete TX/RX devices.)

POWER

Power Supply

PoE | 12V 1A DC

Max Power Consumption

6W (DC Adapter)

Additional Features

  • Supports up to 1080p@60Hz video content
  • Low bandwidth or high-quality transmission methods. Low latency ~ 80ms. High-quality ~250ms
  • Interoperable with NHD-100-TX and NHD-140-TX
  • Analog audio de-embed for easy connection to external audio DSP or amplifier
  • Image scaling – use mixed resolution displays throughout an installation
  • Seamless video switching – no black screens or freeze frames
  • Hugely scalable I/O, utilizing multicast technology
  • Zero-configuration switch setup using unicast technology
  • Flexible IP address settings: AutoIP/Static/DHCP
  • Customizable CEC, IR or RS-232 control of connected devicesCustom “No Source” idle image upload for branded down time
  • Breakaway, independent routing of all video, audio, IR, USB and RS-232 streams
  • Infrared signal generation via API – supports Hex Global Cache format
  • Compatible with NHD-000-RACK4 rack mounting kit (brackets included with decoder)

Share

Cables

We use cookies to improve your experience on our site. By continuing to browse our site, you agree to the use of cookies. For more information, please see our privacy policy.