Description
The NHD-110-RX-S is an AV decoder to the powerful 110 series of NetworkHD components. This “S” model has been treated with Sealoc’s Weatherloc technology to resist the elements such as water, moisture, humidity, dust, salt-fog, salt-air, acidic products and more. The 110 series components support either H.264 or H.265 video encoding/decoding of up to 1080p60Hz content. The NHD-110-RX can natively process up to a 16×16 video wall to create captivating digital landscapes. The 110 series components are also compatible with the NHD-250-RX multiview receiver allowing up to 9 unique streams to be sent to a single display.
High-Efficiency H.265 encoder, commonly known as MPEG-H Part 2, is a video compression standard developed as part of the MPEG-H project to replace the widely used Advanced Video Coding.
AUDIO & VIDEO
Inputs
1x 8-pin RJ-45 female | 10/100Base-T
Outputs
1 x HDMI 19-pin HDMI type A
1x 3-pin Phoenix Analog Audio
(Both HDMI and Analog outputs allow discrete audio routing from any available NHD-110-TX on the same network.)
Audio Formats
LPCM/MPEG4 AAC stereo, 48KHz
Video Encoding
Primary Stream – H.264/H.265, configurable up to 30Mbps
Video Resolutions (Max)
HDMI: 1920x1080p @60Hz 8bit (15m/50ft)
Cat5e or higher: 1920x1080p @60Hz 8bit (100m/328ft)
End to End Latency
High Quality Mode: ~250msLow Latency Mode: ~80ms
Maximum Pixel Clock
165MHz
COMMUNICATION & CONTROL
HDMI
HDCP 1.4 | EDID | CEC (configurable)
RS-232
1x 3-Pin Phoenix – API controlled from NHD-000-CTL
LAN
1x 8-pin RJ-45 female | 10/100Base-T | PoE 802.1af
IR
1x IR TX: 3.5mm TS Jack Socket
1x IR RX: 3.5mm TS Jack Socket
(IR signals can be bidirectional passthrough or via API commands from NHD-000-CTL for routable IR to discrete TX/RX devices.)
POWER
Power Supply
PoE | 12V 1A DC
Max Power Consumption
6W (DC Adapter)
Additional Features
- Supports up to 1080p@60Hz video content
- Low bandwidth or high-quality transmission methods. Low latency ~ 80ms. High-quality ~250ms
- Interoperable with NHD-100-TX and NHD-140-TX
- Analog audio de-embed for easy connection to external audio DSP or amplifier
- Image scaling – use mixed resolution displays throughout an installation
- Seamless video switching – no black screens or freeze frames
- Hugely scalable I/O, utilizing multicast technology
- Zero-configuration switch setup using unicast technology
- Flexible IP address settings: AutoIP/Static/DHCP
- Customizable CEC, IR or RS-232 control of connected devicesCustom “No Source” idle image upload for branded down time
- Breakaway, independent routing of all video, audio, IR, USB and RS-232 streams
- Infrared signal generation via API – supports Hex Global Cache format
- Compatible with NHD-000-RACK4 rack mounting kit (brackets included with decoder)
Reviews
There are no reviews yet.