LUT-LAMP
The Lutron HomeWorks® Table Lamp Dimmers allow floor and table lamps to be added to a system quickly and easily by using Clear Connect RF Technology. They can be, conveniently, hidden behind furniture and are easily installed. Available in both Black and Arctic White.
The Lutron HomeWorks®: Table Lamp Dimmers are simple to install and easy to use. Lamp dimmers allow floor and table lamps to be added to a system quickly and easily by using Clear Connect RF Technology. They can be, conveniently, hidden behind furniture. Available in both black and arctic white.
HomeWorks® lamp dimmers use Lutron patented Clear Connect RF technology which provides reliable, wireless communication with other HomeWorks® devices.
Each lamp dimmer can be controlled individually using a Pico wireless control. Using a HomeWorks® hybrid repeater allows devices to be part of a whole house solution that can be controlled remotely from anywhere in the world.
FEATURES
* Requires HomeWorks® QS software 15.5 or later
SPECIFICATIONS
| Power | 220V to 240V 50/60Hz |
| Typical Power Consumption | < 0.5W Test conditions: Load and LED are off |
| Communication Frequency | 868MHz |
| Regulatory Approvals | CE |
| Environment | Ambient operating temperature: 0°C / 32°F to 40°C / 104°F with 0% to 90% humidity non condensing Indoor use only |
| Communications | HomeWorks® lamp dimmers communicate with the system through Radio Frequency (RF). They must be located within 18m / 60ft line of sight or 9m / 30ft through walls of a Pico wireless control, Radio Powr Savr sensor or hybrid repeater. |
| ESD Protection | Tested to withstand electrostatic discharge without damage or memory loss in accordance with IEC 61000-4-2. |
| Surge Protection | Tested to withstand surge voltages without damage or loss of operation in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low Voltage AC Power Circuits. |
| Power Failure | Power failure memory. Should power be interrupted the lamp dimmer will return to its previous state when power is restored. |
| Device Limits | With repeater: Up to 100 devices (e.g., load controls, lamp dimmers, Pico wireless controls, Radio Powr Savr sensors, shades and repeaters) are supported per RF link. The processor counts as one device and four locations are reserved for hybrid repeaters.
Please Note: Lamp dimmers have load type and capacity limits. For more information, please refer to the Load Capacitysection of the data sheet. |
| Dimensions | Height: 84mm / 3.31″ Width: 58mm / 2.28″ Depth: 30mm / 1.18″ |
