LUT-PROCESSOR
The QS processor from Lutron provides control and communication to HomeWorks® system components. Available in 1 Link and 2 Link.
The QS processor from Lutron provides control and communication to HomeWorks® system components.
The ethernet links allow communication to the HomeWorks® QS software, integration with third party systems and communication between multiple processors.
HomeWorks® QS processors may be connected using either standard networking or using adhoc networking. All processors on a project must be connected to a single network. The HomeWorks® QS software and all integration equipment must be connected to the same network as the processors. The processor is powered from the QSPS-DH-1-75 or QSPS-DH-1-60 power supply. Refer to the HomeWorks® QS software to determine link power requirements.
The QS processor can be installed in a L-LV21 or L-LV14 enclosure.
FEATURES
Configurable links to one of four types:
SPECIFICATIONS
| Power | Processor (P): 24 to 36VDC 250mA Links (L1 / L2): 24 to 36VDC 2 A per link |
| Typical Power Consumption | 5W; 8 Power Draw Units (PDUs) Test conditions: Ethernet link connected and device link in use |
| Regulatory Approvals | Complies with: UL508, CSA – C22.2 No.14, IEC / EN 60669, NOM |
| Environment | Indoor use only. 0°C / 32°F to 40°C / 104°F 0% to 90% humidity, non condensing |
| Heat Generated | 17 BTU/hr typical (24 BTU/hr maximum) |
| Cooling Method | Passive cooling |
| Power Failure Memory | System data stored in non volatile memory. Timeclock retention for 10 years |
| Internal Timeclock | ±1 minute per year |
| Mis-wire Protection | All terminal block inputs are over voltage and mis-wire protected against wire reversals and shorts |
| Low-Voltage Link Wire Type | Two pair: One pair 18 AWG (0.75mm2), one pair 18 to 22 AWG (0.34 to 0.75 mm2) twisted shielded. IEC PELV / NECR Class 2 cable |
| Low-Voltage Power Wire Type | 18 AWG (0.75mm2) |
| Communications | Ethernet, RS485 (QS, RF, Power Panel) |
| Link Capacities | HomeWorks® QS Power Panel Link 16 interfaces / 256 zones HomeWorks® QS Wired Device Link 99 devices / 512 zones HomeWorks® QS RF Link 99 devices / 100 zones HomeWorks® H48 Wired Dimmers 4 interfaces / 192 zones |
| ESD Protection | Meets or exceeds the IEC 61000-4-2 standard |
| Surge Protection | Meets or exceeds ANSI/IEEE C62.41 standard |
| Mounting | Mounts in L-LV14 or L-LV21 enclosures |
| Dimensions | Height: 134mm / 5.26″ Width: 108mm / 4.27″ Depth: 26.9mm / 1.06″ |
| Warranty | Lutron Limited Warranty |
