LUT-PKP-1C
Lutron’s HWQS Palladiom International Keypad elevates the user’s experience with sleek and intuitive design and allows the control of Lutron load control devices via a QS link.
Lutron’s HWQS Palladiom International Keypad elevates the user’s experience with sleek and intuitive design and allows the control of Lutron load control devices via a QS link.
The keypad is pre engraved for extra convenience and is available in a variety of finishes.
The HomeWorks QS wired Palladiom keypad allows the user to control lights, shades or drapes, temperature and 3rd party equipment. The keypad is wired to a HomeWorks QS processor on the QS link. Buttons and faceplates are flush to each other and feature consistent material, creating a clean and minimalist look
Large tactile buttons are easy to use and button engraving is easy to read. Buttons and wall plates are made from the same material for a consistent aesthetic. Buttons with white, backlit engraving make it easy to find and operate the keypad in low light conditions. Status of active button press or scene is indicated through intensity of backlighting which is configurable through the HomeWorks QS software. Dynamic Backlighting Management (DBM) automatically adjusts backlight intensity based on ambient lighting conditions. It can also be programmed in the HomeWorks QS software to adjust intensity by time of day or button presses
Keypads are available in a variety of finishes.
FEATURES
SPECIFICATIONS
| Power | 24 to 36 VDC 30mA |
| Typical Power Consumption | 0.7W Test conditions: All backlights on medium intensity, two LEDs on (two pre-sets active), keypad powered at 24VDC |
| Regulatory Approvals | Lutron Quality Systems registered to ISO 9001:2015. Complies with UL 508, IEC 60669-2-1and CSA C22.22 No. 14-13. EBB-1-3COL only Complies with UL 2269, IEC 60670-1 and CSA C22.22 No. 18.2 (2006 |
| Environment | Ambient operating temperature: 0°C / 32°F to 40°C / 104°F Relative humidity: 0% to 90% humidity, non condensing Application: Indoor use only |
| Communications | SELV/PELV/NEC® Class 2 wiring connects keypads to other devices on the QS link. Each keypad counts as 1 device on the QS link. Each keypad column consumes 1 Power Draw Unit (PDU) on the QS link |
| ESD Protection | Meets IEC 801-2. Tested to withstand 15kV electrostatic discharge without damage or memory loss |
| Power Failure | Power failure memory: should power be interrupted, the keypad will return to its previous state when power is restored |
| Wiring | SELV/PELV/NEC® Class 2 |
| Terminals | Each terminal accepts up to two 18 AWG (1.0 mm2) wires |
| Mounting | Typical square style wall box dimensions: Height: 75 mm / 2.95″ Width: 75mm / 2.95″ Depth: ≥25 mm / ≥0.98″ Typical round style wall box dimensions: 68 mm / 2.68″ Depth: ≥25 mm / ≥0.98″ |
