LUTRON HOMEWORKS QS PHASE ADAPTIVE POWER MODULE – 1A

LUT-LQSE-4A1-D

Lutron’s HomeWorks QS 1A  Phase Adaptive Power Module is a 4 zone power module for phase control dimming. It includes QS link for seamless integration of lights and controls.

Lutron’s HomeWorks QS 1A  Phase Adaptive Power Module is a 4 zone power module for phase control dimming.

It includes QS link for seamless integration of lights and controls.

An auto detect mode is available to detect and configure forward phase or reverse phase (leading edge or trailing edge) dimming for incandescent/halogen, electronic/magnetic low voltage and neon/cold cathode light sources. 

A locked forward phase or reverse phase (leading edge or trailing edge) mode is available.

It controls dimmable LED loads. 

FEATURES

  • 5W (incandescent) minimum load requirement
  • Controls dimmable CFL / LED loads. Refer to www.lutron.com/LEDtool for compatibility with dimmable CFL / LED light sources
  • RTISS Equipped® technology compensates for incoming line voltage variations (up to ± 2% change in frequency/second) such as changes in RMS voltage, frequency shifts, harmonics and line noise
  • Integral protection for common temporary over current and over voltage conditions
  • SSL7 compliant for compatibility with Solid State Lighting
  • LEDs on the module provide diagnostic information
  • Buttons on the module provide override control
  • Manual Override contact closure input (CCI)
  • Power failure memory automatically returns the outputs to the levels they were set to before a power outage

SPECIFICATIONS

Regulatory Approvals  IEC/EN 60669
Lutron® Quality Systems registered to ISO 9001.2008
Power 120 to 240V~ 50/60Hz (cULus and NOM)
220 to 240V~ 50/60Hz (IEC/EN 60669)
Single input feed
4 A maximum total input current
Lightning strike protection meets ANSI/IEEE standard C62.41 and IEC 61000-4-5. Can withstand voltage surges of up to 6 000V~ and current surges of up to 3 000A
ESD protected above agency requirements per IEC 60669-2-1
For ungrounded delta feed applications, contact Lutron
Environment Relative humidity: less than 90% non condensing
For indoor use only
Output Zone Ratings 230W per zone
Please consult the output Zone Rating section of the product specification sheet for further details under specific conditions.
Terminals Torque – 0.6Nm (5in-lbs)
Power terminals

0.25mm2 to 2.5mm2 (22AWG to 12 AWG) single wire, solid or stranded

0.25mm2 to 1mm2 (22AWG to 18 AWG) two wires, solid or stranded

Data terminal – 1 pair, twisted  and screened

0.25mm2 to 2.5mm2 (22AWG to 12 AWG) single wire, solid or stranded

0.25mm2 to 1mm2 (22AWG to 18 AWG) two wires, solid or stranded

Dimension Height: 90mm / 3.54″
Width – 162mm / 6.38″
Depth – 61mm / 2.40″

Share

Cables

We use cookies to improve your experience on our site. By continuing to browse our site, you agree to the use of cookies. For more information, please see our privacy policy.