LUT-QSM3-XW-C
The LUT-QSM3-XW-C Sensor Module from Lutron is a ceiling mounted device that integrates Lutron® wireless sensors through the QS Link on a HomeWorks® QS processor. It allows integration of input devices such as Lutron® occupancy sensors, daylight sensors and Pico® Wireless Controllers to a compatible load control.
The LUT-QSM3-XW-C Sensor Module from Lutron is a ceiling mounted device that integrates Lutron® wireless sensors through the QS Link on a HomeWorks® QS processor.
It allows integration of input devices such as Lutron® occupancy sensors, daylight sensors and Pico® Wireless Controllers to a compatible load control.
In addition, the QS Sensor Module (QSM) integrates Lutron wireless and wired sensors and controls through the QS communication link to Energi Savr NodeTM units, GRAFIK Eye QS, Quantum and Sivoia QS shades and drapes.
No line voltage connections are required because the QSM is powered by the QS Link.
For devices that already integrate directly with sensor inputs, the QSM can expand the number of available inputs or expand the wireless coverage.
FEATURES
SPECIFICATIONS
| LUT-QSM3-XW-C Quantum Sensor Module | |
| Power | 24 V- 400 mA max (wired input), 100 mA max (no wired input) |
| Typical Power Consumption | 1.5W – 3 Power Draw Units (PDUs) |
| Communications | The QSM communicates with the system through the Wired QS Link. The QSM communicates with the system through the Wired QS Link. When communicating via RF, all wireless sensors and Pico® wireless controls must be within 30 ft (9 m) through typical construction materials. |
| Link Capacities | The QSM counts as 1 device toward the link maximum of 100 devices. Wired sensors increase the PDU (Power Draw Units) of the QSM |
| Power Failure | Power failure memory: Should power be interrupted, the QSM will return to its previous state when power is restored. |
| Radio Frequency (RF) Range | 18m / 60ft line of sight 9m / 30ft through walls |
| Environment | Ambient Operating Temperature: 0°C / 32°F to 40°C / 104°F Relative Humidity: 0% to 90% humidity, non condensing Indoor use only |
| Mounting | To ensure optimal wireless range, QSM units should be mounted in the middle of non metal ceiling tile or drywall, visible from inside the space. Installation near metal other than a junction box may reduce RF range. |
| Wiring | QS Link: 22 to 14 AWG (0.5mm2 to 2.5 mm2 ) IEC PELV/NEC® Class 2 wiring Maximum QS Link length 610m / 2000ft |
| Regulatory Approvals | cUL US, FCC, IC, SCT, CE, TRA, WPC |
| Compatible With | GRAFIK Eye QS control unit models starting with QSGR Sivoia QS shades /drapes. Allows Pico wireless controls to control Sivoia QS shades/drapes (QSM models with wireless inputs only) |
| Dimensions | Diameter: 103mm / 4.04″ Depth: 19mm / 0.74″ Profile: 11mm / 0.43″ |
