LUTRON HOMEWORKS® QS PROCESSOR

LUT-PROCESSOR

The QS processor from Lutron provides control and communication to HomeWorks® system components. Available in 1 Link and 2 Link.

The QS processor from Lutron provides control and communication to HomeWorks® system components.

The ethernet links allow communication to the HomeWorks® QS software, integration with third party systems and communication between multiple processors.

HomeWorks® QS processors may be connected using either standard networking or using adhoc networking. All processors on a project must be connected to a single network. The HomeWorks® QS software and all integration equipment must be connected to the same network as the processors. The processor is powered from the QSPS-DH-1-75 or QSPS-DH-1-60 power supply. Refer to the HomeWorks® QS software to determine link power requirements.

The QS processor can be installed in a L-LV21 or L-LV14 enclosure.

FEATURES

The HomeWorks® QS processor provides control and communication to HomeWorks® QS system components
Ethernet link allows communication to the HomeWorks® QS software, integration with third party systems and communication between multiple processors
HomeWorks® QS processors may be connected using either standard networking or using adhoc networking
All processors on a project must be connected to a single network
The processor is powered from the QSPS-DH-1-75 power supply

Configurable links to one of four types:

HomeWorks® QS Power Panels 16 interfaces / 256 zones
HomeWorks® QS Wired Device Link 99 devices / 512 zones
HomeWorks® QS RF Link 99 devices / 100 zones
HomeWorks® H48 Wired Dimmers 4 interfaces / 192 zones

SPECIFICATIONS

Power	Processor (P): 24 to 36VDC 250mA Links (L1 / L2): 24 to 36VDC 2 A per link
Typical Power Consumption	5W; 8 Power Draw Units (PDUs) Test conditions: Ethernet link connected and device link in use
Regulatory Approvals	Complies with: UL508, CSA – C22.2 No.14, IEC / EN 60669, NOM
Environment	Indoor use only. 0°C / 32°F to 40°C / 104°F 0% to 90% humidity, non condensing
Heat Generated	17 BTU/hr typical (24 BTU/hr maximum)
Cooling Method	Passive cooling
Power Failure Memory	System data stored in non volatile memory. Timeclock retention for 10 years
Internal Timeclock	±1 minute per year
Mis-wire Protection	All terminal block inputs are over voltage and mis-wire protected against wire reversals and shorts
Low-Voltage Link Wire Type	Two pair: One pair 18 AWG (0.75mm2), one pair 18 to 22 AWG (0.34 to 0.75 mm2) twisted shielded. IEC PELV / NECR Class 2 cable
Low-Voltage Power Wire Type	18 AWG (0.75mm2)
Communications	Ethernet, RS485 (QS, RF, Power Panel)
Link Capacities	HomeWorks® QS Power Panel Link 16 interfaces / 256 zones HomeWorks® QS Wired Device Link 99 devices / 512 zones HomeWorks® QS RF Link 99 devices / 100 zones HomeWorks® H48 Wired Dimmers 4 interfaces / 192 zones
ESD Protection	Meets or exceeds the IEC 61000-4-2 standard
Surge Protection	Meets or exceeds ANSI/IEEE C62.41 standard
Mounting	Mounts in L-LV14 or L-LV21 enclosures
Dimensions	Height: 134mm / 5.26″ Width: 108mm / 4.27″ Depth: 26.9mm / 1.06″
Warranty	Lutron Limited Warranty