AUDIO & VIDEO
NetworkHD™ 200 Series AV over IP H.264 MultiView Processor
The NHD-250-RX is an enhanced MultiView display decoder compatible with the NetworkHD 100 and 200 Series, an ultra low bandwidth H.264 AV over IP solution for distribution of point-to-point, one-to-many and many-to-many over a managed network.
The NHD-250-RX H.264 decoder is intended for use with 100 or 200 Series H.264 encoders (sold separately) to provide a complete end-to-end video distribution system. When used in conjunction with the NHD-000-CTL system controller complete control integration is simple.
AUDIO & VIDEO
Inputs
1x 8-pin RJ-45 (Transmission from TX)
Outputs
1x HDMI Out: 19-pin HDMI Type A1x Audio Out: 3-pin Terminal Block (3.5mm)
Audio Formats
2ch LPCM 48KHz
Input Video Decoding
H.264
Decoding Data Rate
Max: 30Mb/s per stream
End to End Latency (Max)
~80ms (low latency mode) | ~300ms (high quality mode)
Video Resolutions (Max)
3840x2160p @60Hz (Tile mode only)
1920x1080p @60Hz
1280x720p @60Hz
720x576p @50Hz
720x480p @60Hz
60fps Progressive: 640×480 | 800×600 | 1024×768 | 1280×800 | 1280×1024 | 1360×768 | 1366×768 | 1400×1050 | 1440×900 | 1600×1200 | 1680×1050 | 1920×1200
Maximum Pixel Clock
594MHz
COMMUNICATION & CONTROL
HDMI
HDCP 1.4 | CEC
RS-232
2x RS-232: 4-pin Terminal Block (3.5mm) | 2 Way
Ethernet
1x LAN (PoE): 8-pin RJ-45 ANSI/TIA-568 8P8C, 1000Base-T, PoE PD (IEEE 802.3af)
POWER
Power Supply
12V DC
PoE
IEEE 802.3af | (15.4W at PSE)
Max Power Consumption
6W (DC adapter)
Additional Features
We use cookies to improve your experience on our site. By continuing to browse our site, you agree to the use of cookies. For more information, please see our privacy policy.
